Add `data->state.origin` as the origin the transfer is sending the
current request to/gets the response from. Use it for request specific
properties like authentication, hsts and cookie handling, etc.
Unless talking to a forwarding HTTP proxy (e.g. not tunneling),
`data->state.origin` and `conn->origin` are the same.
With a forwarding HTTP proxy in play, `conn->origin` is set to
`conn->http_proxy.peer` and `conn->bits.origin_is_proxy` (a new bit) is
set.
Remove the connection bits, now replaced with:
* `conn->bits.socksproxy` -> `conn->socks_proy.peer`
* `conn->bits.httpproxy` -> `conn->http_proy.peer`
* `conn->bits.proxy` -> `(conn->socks_proy.peer || conn->http_proy.peer`)
* `conn->bits.tunnel_proxy` -> (`conn->http_proy.peer && !conn->bits.origin_is_proxy`)
* `(conn->bits.httpproxy && !conn->bits.tunnel_proxy)` -> `conn->bits.origin_is_proxy`
Rename `noproxy.[ch]` to `proxy.[ch]`. Move the connection proxy setup
code from `url.c` to `proxy.c`.
Remove `data->info.conn_remote_port` as no one uses it.
Add test_40_02b for a SOCKS connection to a forwarding HTTPS proxy.
Update internal documentation about peers and creds.
Closes#21967
Adjust code to avoid `-Wformat-signedness` warnings, while making sure
that enums are always cast to a known type when passing them to `printf`
functions, to support compilers and compiler settings where enums are
not default-size signed ints.
- cast integers printed as hex to `unsigned`. (63 times, 20 of them in
`mbedtls.c`)
- cast misc enums to `int` for printing. (31 times)
- cast `CURL_LOCK_DATA_*` enums to `int`. (4 times)
- cast `CURL_FORMADD_*` enums to `int`. (13 times)
- cast `CURLSHE_*` enums to `int`. (3 times)
- cast `CURLUE_*` enums to `int`. (33 times)
- cast `CURLMSG_*` enums to `int`. (6 times)
- cast `CURLE_*` enums to `int`. (~380 times)
- unit1675: fix mask.
Follow-up to 7c34365cce#21879
Ref: #18343 (initial attempt)
Closes#20848
closing a filter chain and reconnecting it again is a complication
that only the HTTP/1.x proxy filter used. Remove it from all filters.
Instead, a filter can return CURLE_AGAIN during the connect phase
and the cf-setup filter will tear down all "sub filters" and restart
over.
With this, a filter never resets to the initial phase but progresses
through connect -> connected -> shutdown -> destroy once.
Closes#21831
- H3 proxy: re-sync code with original source `curl_ngtcp2.c` to reduce
differences, and to apply missed minor fixes. Also apply clang-format.
Drop redundant `#undef`s, casts, `#endif` comments, includes, drop
intermediate variables, sync include and macro order.
Follow-up to e78b1b3ecc#21153
- INSTALL-CMAKE.md: move `CURL_ENABLE_SMB` to the enable section.
- tests/http/env: rename `tcpdmp` to `tcpdump` to match object variable.
- mbedtls: drop incorrect `mbedTLS 4+` comments.
(features are also supported by 3+, meaning it's always supported.)
- lib1648: rename a variable to match purpose.
- CIPHERS.md: alpha-sort link list.
- replace rare `X''` hex markup with `0x`.
- `IP v4/6` -> `IPv4/6`.
- 'version X.Y' -> 'vX.Y', where sensible.
- 'VX.Y' -> 'vX.Y', where sensible.
- fix indents, casing, newlines, typos.
Closes#21772
This patch adds two major proxy capabilities to curl (ngtcp2 QUIC):
- HTTP/3 Proxy CONNECT: Tunnel HTTP/1.1 or HTTP/2 traffic through an
HTTPS proxy that speaks HTTP/3 (QUIC) using the standard CONNECT
method over an HTTP/3 connection.
- MASQUE CONNECT-UDP: Tunnel HTTP/3 (QUIC) traffic through an HTTP
proxy (speaking HTTP/1.1, HTTP/2, or HTTP/3) using the extended
CONNECT method with the CONNECT-UDP protocol (RFC9297 & RFC9298).
Public API additions:
- `CURLPROXY_HTTPS3`: new proxy type constant for HTTP/3 proxy
- `--proxy-http3`: new CLI flag to negotiate HTTP/3 with HTTPS proxy
The implementation adds two new filters:
- `H3-PROXY` - enables negotiating HTTP/3 (QUIC) to the proxy and
running CONNECT/CONNECT-UDP through that proxy transport.
- `CAPSULE` - dedicated filter inserted between QUIC transport and
HTTP-PROXY to handle datagram capsule encapsulation/decapsulation.
Here is how the curl filter chaining looks in different scenarios:
- HTTP/3 Proxy CONNECT (tunneling TCP protocols over QUIC proxy):
conn -> HTTP/1.1 or HTTP/2 -> SSL -> HTTP-PROXY ->
H3-PROXY -> HAPPY-EYEBALLS -> UDP
- MASQUE CONNECT-UDP (tunneling QUIC over any proxy):
conn -> HTTP/3 -> CAPSULE -> HTTP-PROXY -> H3-PROXY ->
HAPPY-EYEBALLS -> UDP
conn -> HTTP/3 -> CAPSULE -> HTTP-PROXY -> H1-PROXY or H2-PROXY ->
SSL -> HAPPY-EYEBALLS -> TCP
- Both features currently require the ngtcp2 QUIC backend.
- Both features are experimental (disabled by default). Enable with
`--enable-proxy-http3`(autotools) or `-DUSE_PROXY_HTTP3=ON`(CMake).
Tests:
- tests/unit/unit3400.c: Unit tests for capsule protocol encode/decode
- tests/http/test_60_h3_proxy.py: Comprehensive pytest integration suite
- tests/http/testenv/h2o.py: Managing h2o instances with HTTP/1.1, HTTP/2,
and HTTP/3 (QUIC) listeners, proxy.connect and proxy.connect-udp enabled.
References:
RFC 9297 - HTTP Datagrams and the Capsule Protocol
RFC 9298 - Proxying UDP in HTTP
RFC 9000 §16 — Variable-Length Integer Encoding
Signed-off-by: Aritra Basu <aritrbas+gh@cisco.com>
Closes#21153
The HTTP/2 feature is deprecated, few servers implement it and our
implementation is complicated by its state management. Make the two
CURLOPT_* involved a nop and deprecate them.
Closes#21723
`struct Curl_peer` keeps information about a communication endpoint
together. It will replace `conn->host` and `conn->conn_to_host` and
proxyinfo host. It will also become part of `struct ssl_peer`.
It has a reference counter, so an instance can be shared between
connections and filters.
Elminiates `conn->host` and `conn->connect_to_host`, used in the
proxyinfo structures. Passed to DNS resolution and socks filters, etc.
Pass peer to http proxy and socks tunnel filters. Use peer in dns filter
and resolving. Make `Curl_peer` a member in the `struct ssl_peer`.
Add `docs/internals/PEERS.md` for documentation.
Closes#21472
Add new internal `curl_url_same_origin()` to check if a href has the
same origin as a base URL. Add test cases in test1675 and use this in
http2 push handling.
Closes#21328
- examples: sync debug output printf masks.
- INSTALL-CMAKE.md: tidy up section for some options.
- curl_sha512_256: delete comment suggesting an optimization.
- vtls/keylog: scope a variable.
- vtls/openssl: make a source code URL a permalink.
- vtls/schannel: drop redundant parentheses.
- test1119.pl: robustify `$1` -> `$s`.
- sync arg names in comments to match the code.
- tidy up and minor fixes to comments.
- fix formatting/indenting/comment/newline/include nits.
- move `UNITTEST` protos next to definitions, sync their argument names.
- make variables static.
- add parentheses to Perl `open()` calls.
- drop unnecessary double quotes in Perl.
- clang-format.
Closes#21000
To sync names for the same macro logic between lib and src, and to move
it to the curlx namespace, to match `curlx_free()` that it's calling.
Closes#21151
When assembling the URL of a pushed resource over a not-secured
connection, require the scheme to be known and not secure.
Reported-by: xkilua on hackerone
Closes#21113
Improve the name, type and handling of `data->req.keepon`:
- Rename `keepon` to `io_flags`
- make `io_flags` and `uint8_t` and reposition in struct
- Rename `KEEP_*` defines to `REQ_IO_*`, move to request.h
- Replace all direct bit tests to `CURL_REQ_WANT_*` use
- Replace all direct bit manipulations with new macros
Closes#20905
- vms/curlmsg_vms.h: delete unused/commented code.
- vtls/schannel_verify: sort includes.
- typecheck-gcc.h: fix indent and alignment.
- lib/config-win32.h: drop idle `#undef`.
- spacecheck: check for stray empty lines before after curly braces.
- make literals more readable: 1048576 -> 1024 * 1024
- scope variables.
- use ISO date in a comment.
- drop redundant parentheses.
- drop empty comments.
- unfold lines.
- duplicate/stray spaces in comments.
- fix indent, whitespace, minor typos.
Closes#20690
- fix internal macro `AN_APPLE_OS` reused between sources without
resetting it. It may potentially have left the system sha256
function unused.
- fix to define `WOLFSSL_OPTIONS_IGNORE_SYS` so that it always applies
to wolfSSL headers, also during feature detection.
- md4, md5, sha256: simplify fallback logic.
- delete 20+ unused macros.
- scope or move macros to avoid `-Wunused-macros` warnings.
- examples: delete unused code.
The warning detects macros defined but not used within the same C
source. It does not warn for macros defined in headers. It also works
with unity builds, but to a lesser extent.
Closes#20593
curl requires `stdint.h` from C99, and no longer builds without it since
v8.18.0 (after dropping VS2008 support). Assume it's available, drop
feature checks.
Also:
- drop duplicate `stdint.h` includes.
- introduce internal `HAVE_UINTPTR_T`, enabled by default.
- OS400: disable `HAVE_UINTPTR_T`.
- build: keep cmake pre-fill and `cmp-config.pl` exception because cmake
and autotools both detect `stdint.h` implicitly.
Co-authored-by: Dan Fandrich
Ref: #20405
Ref: #20384
Follow-up to 2e1a045d89#17931Closes#20406
For HTTP/2, add error code description to close failures.
For HTTP/3, add special handling like in HTTP/2 when streams
have been rejected or an error comes during the response body
and we are not interested in the body.
Closes#20207
When the compiler supports C99.
- map logging functions to macro stubs when verbose logging is disabled
and the compiler is C99. Make sure these stubs silence unused variable
warnings for non-variadic arguments.
Before this patch they mapped to function stubs, the same codepath
used for C89 compiler in this configuration.
- introduce new macros to tell the compiler which code to include
when verbose code is active, or inactive:
- `CURLVERBOSE`: defined when verbose code is active.
To enclose blocks of code only used for verbose logging.
- `VERBOSE(statement);`:
compile statement when verbose code is active.
To mark code lines only used for verbose logging.
- `NOVERBOSE(statement);`:
compile statement when verbose code is inactive.
To suppress warnings for arguments passed to logging functions via
printf masks, e.g. `NOVERBOSE((void)ipaddress);`, yet keeping
the warning in verbose builds.
Note these macros are not the same as `CURL_DISABLE_VERBOSE_STRINGS`.
Verbose code is always active in C89 mode (without variadic macro
support).
- drop existing uses of `CURL_DISABLE_VERBOSE_STRINGS` where redundant,
or replace with the above macros. Ending up reducing the number of
`#ifdef`s, and also the number of lines.
Assisted-by: Daniel Stenberg
Assisted-by: Jay Satiro
Reported-by: Dan Fandrich
Fixes#20341
Refs: #12105#12167Closes#20353
Add casts to `bool`, or use `bit` type in local variables, where
neccessary to avoid MSVC compiler warnings C4242.
Note: There may remain places needing the above updates, where not
tested in CI, and missed in manual review.
Also:
- urldata: convert struct field `connect_only` to bitfield to match its
counterpart in another struct.
- rename curl-specific `bit` type to `curl_bit`.
Closes#20142
When a download size is known and rate limiting is in effect, adjust the
duration of each measurement step and its rate for maximum precision.
Since it is unpredictable how long the last bytes of a download will
take, download speed can be thrown off if the "last bytes" are a
significant amount of the total download. Make the "last bytes" small in
comparision to the rest and "stretch" the rate limit intervals to
accommodate the difference.
Fix ngtcp2 receive data acknowldgements to be based on a local window
size tracking. This allows window updates controlled by rate limits.
Fix ratelimit wait time calculation to accomodate negative tokens.
h3 rate limit, update timeers
Make download rate limits work correctly in ngtcp2. Fix multi handling
of rate limits to set a timer for when limits will update again.
Without running the transfer on limit updates, protocols like h2/h3 may
stall if the server does not send due to stream windows being too small.
scorecard: measure download speedlimits
When running scorecard with --limit-rate=n, show the reported download
speed averages plus percentage deviation from the limit.
Closes#20228
Most by moving functions around. Also delete unused ones.
Reducing their number from 83 to 33.
Remaining ones due to:
- circular dependencies.
- H3 code, that I did not attempt to update and likely the above applies.
- static declarations with attributes (`CURL_PRINTF`, `WARN_UNUSED_RESULT`).
- OS400 code.
Closes#20321
- asyn-thrdd.c: scope an include.
- apply more clang-format suggestions.
- tidy-up PP guard comments.
- delete empty line from the top of headers.
- add empty line after `curl_setup.h` include where missing.
- fix indent.
- CODE_STYLE.md: add `strcpy`.
Follow-up to 8636ad55df#20088
- lib1901.c: drop unnecessary line.
Follow-up to 436e67f65b#20076Closes#20070
- replace `sendf.h` with `curl_trc.h` where it was included just for it.
- drop unused `curl_trc.h` includes.
- easy: delete obsolete comment about `send.h` include reason.
Also:
- move out `curl_trc.h` include from `sendf.h` and include it directly
in users, where not done already. To flatten the include tree and
to less rely on indirect includes.
- stop including `sendf.h` from other headers, replace it with forward
declaration of `Curl_easy`, as done already elsewhere.
Verified with an all non-unity CI run.
Closes#20061
To make it available for all files. Drop includes from individual
sources. This header was already included from most sources and not
specific to any internal subsystem.
Also to ensure that two system symbol redefines on Windows (`read()` and
`write()`) get applied to all sources. Move them to `curl_setup.h`.
Closes#20056
- curl_range: replace `sendf.h` with direct header dependency
`curl_trc.h`.
- drop `curl/curl.h` includes from internal sourcees in favor of the
include made from `curl_setup.h`. Replace it with the latter where
it's the only include.
- include `curl_setup.h` before using macros, where missing.
- drop redundant `stdlib.h`, `string.h` includes, in favor of
`curl_setup_once.h` including them.
- drop redundant `limits.h` in favor of `curl_setup.h` including it.
- fake_addrinfo.h: fix typo in comment.
- curl_setup_once.h: drop `stdio.h` in favor of earlier include in
`curl_setup.h`.
- drop stray, unused, `stddef.h` includes.
- memdebug.h: add missing `stddef.h` include. (relying on accidental
includes via other headers before this patch.)
- stddef.h: document why it's included.
- strerr: drop `curl/mprintf.h` in favor of `curl/curl.h` including it
via `curl_setup.h`.
Closes#20027
Always use curlx_now() when calling Curl_pgrs_now(data). Tests with the
"manual" updates to now proved differ more then 100ms in parallel testing.
Add `curlx_nowp()` to set current time into a struct curltime.
Add `curlx_ptimediff_ms() and friends, passing pointers.
Update documentation.
Closes#19998
Use `data->progress.now` as the timestamp of proecssing a transfer.
Update it on significant events and refrain from calling `curlx_now()`
in many places.
The problem this addresses is
a) calling curlx_now() has costs, depending on platform. Calling it
every time results in 25% increase `./runtest` duration on macOS.
b) we used to pass a `struct curltime *` around to save on calls, but
when some method directly use `curx_now()` and some use the passed
pointer, the transfer experienes non-linear time. This results in
timeline checks to report events in the wrong order.
By keeping a timestamp in the easy handle and updating it there, no
longer invoking `curlx_now()` in the "lower" methods, the transfer
can observer a steady clock progression.
Add documentation in docs/internals/TIME-KEEPING.md
Reported-by: Viktor Szakats
Fixes#19935Closes#19961
Since we no longer traverse the transfers attached to a connection,
change the sparse bitset to just a `uint32_t` counter.
This makes multi_ev the single user of sparse bitsets for transfers
using a socket and allocation failures are handled there correctly.
Refs #19818Closes#19836
