For PAC, to avoid having too many bins, arena bins still have the same
layout. This means some extra search is needed for a page-level request that
is not aligned with the orginal size class: it should also search the heap
before the current index since the previous heap might also be able to
have some allocations satisfying it. The same changes apply to HPA's
psset.
This search relies on the enumeration of the heap because not all allocs in
the previous heap are guaranteed to satisfy the request. To balance the
memory and CPU overhead, we currently enumerate at most a fixed number
of nodes before concluding none can satisfy the request during an
enumeration.
To prepare for the upcoming changes where size class grows by PAGE when
larger than NGROUP * PAGE, disable the tcache when it is larger than 2 *
NGROUP * PAGE. The threshold for tcache is set higher to prevent perf
regression as much as possible while usizes between NGROUP * PAGE and 2 *
NGROUP * PAGE happen to grow by PAGE.
Adding a build-time config option (--enable-limit-usize-gap) and a
runtime one (limit_usize_gap) to guard the changes. When build-time
config is enabled, some minor CPU overhead is expected because usize
will be stored and accessed apart from index. When runtime option is
also enabled (it can only be enabled with the build-time config
enabled). a new usize calculation approach wil be employed. This new
calculation will ceil size to the closest multiple of PAGE for all sizes
larger than USIZE_GROW_SLOW_THRESHOLD instead of using the size classes.
This adds a new autoconf flag, --disable-user-config, which disables
reading the configuration from /etc/malloc.conf or the MALLOC_CONF
environment variable. This can be useful when integrating jemalloc in a
binary that internally handles all aspects of the configuration and
shouldn't be impacted by ambient change in the environment.
The gettid() function is available on Linux in glibc only since version
2.30. There are supported distributions that still use older glibc
version. Thus add a configure check if the gettid() function is
available and extend the check in src/prof_stack_range.c so it's skipped
also when gettid() isn't available.
Fixes: https://github.com/jemalloc/jemalloc/issues/2740
When evaluating changes in HPA logic, it is useful to know internal
`hpa_shard` state. Great deal of this state is `psset`. Some of the
`psset` stats was available, but in disaggregated form, which is not
very convenient. This commit exposed `psset` counters to `mallctl`
and malloc stats dumps.
Example of how malloc stats dump will look like after the change.
HPA shard stats:
Pageslabs: 14899 (4354 huge, 10545 nonhuge)
Active pages: 6708166 (2228917 huge, 4479249 nonhuge)
Dirty pages: 233816 (331 huge, 233485 nonhuge)
Retained pages: 686306
Purge passes: 8730 (10 / sec)
Purges: 127501 (146 / sec)
Hugeifies: 4358 (5 / sec)
Dehugifies: 4 (0 / sec)
Pageslabs, active pages, dirty pages and retained pages are rows added
by this change.
Config validation was introduced at 3aae792b with main intention to fix
infinite purging loop, but it didn't actually fix the underlying
problem, just masked it. Later 47d69b4ea was merged to address the same
problem.
Options `hpa_dirty_mult` and `hpa_hugification_threshold` have different
application dimensions: `hpa_dirty_mult` applied to active memory on the
shard, but `hpa_hugification_threshold` is a threshold for single
pageslab (hugepage). It doesn't make much sense to sum them up together.
While it is true that too high value of `hpa_dirty_mult` and too low
value of `hpa_hugification_threshold` can lead to pathological
behaviour, it is true for other options as well. Poor configurations
might lead to suboptimal and sometimes completely unacceptable
behaviour and that's OK, that is exactly the reason why they are called
poor.
There are other mechanism exist to prevent extreme behaviour, when we
hugified and then immediately purged page, see
`hpa_hugify_blocked_by_ndirty` function, which exist to prevent exactly
this case.
Lastly, `hpa_dirty_mult + hpa_hugification_threshold >= 1` constraint is
too tight and prevents a lot of valid configurations.
Linux 6.1 introduced `MADV_COLLAPSE` flag to perform a best-effort
synchronous collapse of the native pages mapped by the memory range into
transparent huge pages.
Synchronous hugification might be beneficial for at least two reasons:
we are not relying on khugepaged anymore and get an instant feedback if
range wasn't hugified.
If `hpa_hugify_sync` option is on, we'll try to perform synchronously
collapse and if it wasn't successful, we'll fallback to asynchronous
behaviour.
Milliseconds are used a lot in hpa, so it is convenient to have
`nstime_ms_since` function instead of dividing to `MILLION` constantly.
For consistency renamed `nstime_msec` to `nstime_ms` as `ms` abbreviation
is used much more commonly across codebase than `msec`.
```
$ grep -Rn '_msec' include src | wc -l
2
$ grep -RPn '_ms( |,|:)' include src | wc -l
72
```
Function `nstime_msec` wasn't used anywhere in the code yet.
Option `experimental_hpa_strict_min_purge_interval` was expected to be
temporary to simplify rollout of a bugfix. Now, when bugfix rollout is
complete it is safe to remove this option.
During boot, some mutexes are not initialized yet, plus there's no point taking
many mutexes while everything is covered by the global init lock, so the locking
assumptions in some functions (e.g. background_thread_enabled_set()) can't be
enforced. Skip the lock owner check in this case.
HUGEPAGE could be larger on some platforms (e.g. 512M on aarch64 w/ 64K pages),
in which case it would cause grow_retained / exp_grow to over-reserve VMs.
Similarly, make sure the base alloc has a const 2M alignment.
Option `experimental_hpa_max_purge_nhp` introduced for backward
compatibility reasons: to make it possible to have behaviour similar
to buggy `hpa_strict_min_purge_interval` implementation.
When `experimental_hpa_max_purge_nhp` is set to -1, there is no limit
to number of slabs we'll purge on each iteration. Otherwise, we'll purge
no more than `experimental_hpa_max_purge_nhp` hugepages (slabs). This in
turn means we might not purge enough dirty pages to satisfy
`hpa_dirty_mult` requirement.
Combination of `hpa_dirty_mult`, `experimental_hpa_max_purge_nhp` and
`hpa_strict_min_purge_interval` options allows us to have steady rate of
pages returned back to the system. This provides a strickier latency
guarantees as number of `madvise` calls is bounded (and hence number of
TLB shootdowns is limited) in exchange to weaker memory usage
guarantees.
We update `shard->last_purge` on each call of `hpa_try_purge` if we
purged something. This means, when `hpa_strict_min_purge_interval`
option is set only one slab will be purged, because on the next
call condition for too frequent purge protection
`since_last_purge_ms < shard->opts.min_purge_interval_ms` will always
be true. This is not an intended behaviour.
Instead, we need to check `min_purge_interval_ms` once and purge as many
pages as needed to satisfy requirements for `hpa_dirty_mult` option.
Make possible to count number of actions performed in unit tests (purge,
hugify, dehugify) instead of binary: called/not called. Extended current
unit tests with cases where we need to purge more than one page for a
purge phase.
It doesn't make much sense to repeat purging once we done with
hugification, because we can de-hugify pages that were hugified just
moment ago for no good reason. Let them wait next deferred work phase
instead. And if they still meeting purging conditions then, purge them.
Tag 101 is assigned to "CoreMedia Capture Data", which makes for confusing output when debugging.
To avoid conflicts, use a tag in the reserved application-specific range from 240–255 (inclusive).
All assigned tags: 94d3b45284/osfmk/mach/vm_statistics.h (L773-L775)
Change in `hpa_min_purge_interval_ms` handling logic is not backward
compatible as it might increase memory usage. Now this logic guarded by
`hpa_strict_min_purge_interval` option.
When `hpa_strict_min_purge_interval` is true, we will purge no more than
`hpa_min_purge_interval_ms`. When `hpa_strict_min_purge_interval` is
false, old purging logic behaviour is preserved.
Long term strategy migrate all users of hpa to new logic and then delete
`hpa_strict_min_purge_interval` option.
Currently, hugepages aware allocator backend works together with classic
one as a fallback for not yet supported allocations. When background
threads are enabled wake up time for classic interfere with hpa as there
were no checks inside hpa purging logic to check if we are not purging too
frequently. If background thread is running and `hpa_should_purge`
returns true, then we will purge, even if we purged less than
hpa_min_purge_interval_ms ago.
This lets us easily see what fraction of flush load is being taken up by the
bins, and helps guide future optimization approaches (for example: should we
prefetch during cache bin fills? It depends on how many objects the average fill
pops out of the batch).
This adds a fast-path for threads freeing a small number of allocations to
bins which are not their "home-base" and which encounter lock contention in
attempting to do so. In producer-consumer workflows, such small lock hold times
can cause lock convoying that greatly increases overall bin mutex contention.
