any future changes to the underlying data type for bin sizes
(such as upgrading from `uint16_t` to `uint32_t`) can be achieved
by modifying only the `cache_bin_sz_t` definition.
Signed-off-by: Xin Yang <yangxin.dev@bytedance.com>
The maximum allowed value for `nflush_batch` is
`CACHE_BIN_NFLUSH_BATCH_MAX`. However, `tcache_bin_flush_impl_small`
could potentially declare an array of `emap_batch_lookup_result_t`
of size `CACHE_BIN_NFLUSH_BATCH_MAX + 1`. leads to a `VARIABLE_ARRAY`
assertion failure, observed when `tcache_nslots_small_max` is
configured to 2048. This patch ensures the array size does not exceed
the allowed maximum.
Signed-off-by: Xin Yang <yangxin.dev@bytedance.com>
Implementation inspired by idea described in "Beyond malloc efficiency
to fleet efficiency: a hugepage-aware memory allocator" paper [1].
Primary idea is to track maximum number (peak) of active pages in use
with sliding window and then use this number to decide how many dirty
pages we would like to keep.
We are trying to estimate maximum amount of active memory we'll need in
the near future. We do so by projecting future active memory demand
(based on peak active memory usage we observed in the past within
sliding window) and adding slack on top of it (an overhead is reasonable
to have in exchange of higher hugepages coverage). When peak demand
tracking is off, projection of future active memory is active memory we
are having right now.
Estimation is essentially the same as `nactive_max * (1 + dirty_mult)`.
Peak demand purging algorithm controlled by two config options. Option
`hpa_peak_demand_window_ms` controls duration of sliding window we track
maximum active memory usage in and option `hpa_dirty_mult` controls
amount of slack we are allowed to have as a percent from maximum active
memory usage. By default `hpa_peak_demand_window_ms == 0` now and we
have same behaviour (ratio based purging) that we had before this
commit.
[1]: https://storage.googleapis.com/gweb-research2023-media/pubtools/6170.pdf
Add opt.process_madvise_max_batch which determines if process_madvise is enabled
(non-zero) and the max # of regions in each batch. Added another limiting
factor which is the space to reserve on stack, which results in the max batch of
128.
Converting size to usize is what jemalloc has been done by ceiling
size to the closest size class. However, this causes lots of memory
wastes with HPA enabled. This commit changes how usize is calculated so
that the gap between two contiguous usize is no larger than a page.
Specifically, this commit includes the following changes:
1. Adding a build-time config option (--enable-limit-usize-gap) and a
runtime one (limit_usize_gap) to guard the changes.
When build-time
config is enabled, some minor CPU overhead is expected because usize
will be stored and accessed apart from index. When runtime option is
also enabled (it can only be enabled with the build-time config
enabled). a new usize calculation approach wil be employed. This new
calculation will ceil size to the closest multiple of PAGE for all sizes
larger than USIZE_GROW_SLOW_THRESHOLD instead of using the size classes.
Note when the build-time config is enabled, the runtime option is
default on.
2. Prepare tcache for size to grow by PAGE over GROUP*PAGE.
To prepare for the upcoming changes where size class grows by PAGE when
larger than NGROUP * PAGE, disable the tcache when it is larger than 2 *
NGROUP * PAGE. The threshold for tcache is set higher to prevent perf
regression as much as possible while usizes between NGROUP * PAGE and 2 *
NGROUP * PAGE happen to grow by PAGE.
3. Prepare pac and hpa psset for size to grow by PAGE over GROUP*PAGE
For PAC, to avoid having too many bins, arena bins still have the same
layout. This means some extra search is needed for a page-level request that
is not aligned with the orginal size class: it should also search the heap
before the current index since the previous heap might also be able to
have some allocations satisfying it. The same changes apply to HPA's
psset.
This search relies on the enumeration of the heap because not all allocs in
the previous heap are guaranteed to satisfy the request. To balance the
memory and CPU overhead, we currently enumerate at most a fixed number
of nodes before concluding none can satisfy the request during an
enumeration.
4. Add bytes counter to arena large stats.
To prepare for the upcoming usize changes, stats collected by
multiplying alive allocations and the bin size is no longer accurate.
Thus, add separate counters to record the bytes malloced and dalloced.
5. Change structs use when freeing to avoid using index2size for large sizes.
- Change the definition of emap_alloc_ctx_t
- Change the read of both from edata_t.
- Change the assignment and usage of emap_alloc_ctx_t.
- Change other callsites of index2size.
Note for the changes in the data structure, i.e., emap_alloc_ctx_t,
will be used when the build-time config (--enable-limit-usize-gap) is
enabled but they will store the same value as index2size(szind) if the
runtime option (opt_limit_usize_gap) is not enabled.
6. Adapt hpa to the usize changes.
Change the settings in sec to limit is usage for sizes larger than
USIZE_GROW_SLOW_THRESHOLD and modify corresponding tests.
7. Modify usize calculation and corresponding tests.
Change the sz_s2u_compute. Note sz_index2size is not always safe now
while sz_size2index still works as expected.
Before this commit we had two age counters: one global in HPA central
and one local in each HPA shard. We used HPA shard counter, when we are
reused empty pageslab and HPA central counter anywhere else. They
suppose to be comparable, because we use them for allocation placement
decisions, but in reality they are not, there is no ordering guarantees
between them.
At the moment, there is no way for pageslab to migrate between HPA
shards, so we don't actually need HPA central age counter.
This adds a new autoconf flag, --disable-user-config, which disables
reading the configuration from /etc/malloc.conf or the MALLOC_CONF
environment variable. This can be useful when integrating jemalloc in a
binary that internally handles all aspects of the configuration and
shouldn't be impacted by ambient change in the environment.
We tried to load `g` from `bitmap[i]` before checking it is actually a
valid load. Tweaked a loop a bit to `break` early, when we are done
scanning for bits.
Before this commit undefined behaviour sanitizer from GCC 14+ was
unhappy at `test/unit/bitmap` test with following error.
```
../include/jemalloc/internal/bitmap.h:293:5: runtime error: load of
address 0x7bb1c2e08008 with insufficient space for an object of type
'const bitmap_t'
<...>
#0 0x62671a149954 in bitmap_ffu ../include/jemalloc/internal/bitmap.h:293
#1 0x62671a149954 in test_bitmap_xfu_body ../test/unit/bitmap.c:275
#2 0x62671a14b767 in test_bitmap_xfu ../test/unit/bitmap.c:323
#3 0x62671a376ad1 in p_test_impl ../test/src/test.c:149
#4 0x62671a377135 in p_test ../test/src/test.c:200
#5 0x62671a13da06 in main ../test/unit/bitmap.c:336
<...>
```
When evaluating changes in HPA logic, it is useful to know internal
`hpa_shard` state. Great deal of this state is `psset`. Some of the
`psset` stats was available, but in disaggregated form, which is not
very convenient. This commit exposed `psset` counters to `mallctl`
and malloc stats dumps.
Example of how malloc stats dump will look like after the change.
HPA shard stats:
Pageslabs: 14899 (4354 huge, 10545 nonhuge)
Active pages: 6708166 (2228917 huge, 4479249 nonhuge)
Dirty pages: 233816 (331 huge, 233485 nonhuge)
Retained pages: 686306
Purge passes: 8730 (10 / sec)
Purges: 127501 (146 / sec)
Hugeifies: 4358 (5 / sec)
Dehugifies: 4 (0 / sec)
Pageslabs, active pages, dirty pages and retained pages are rows added
by this change.
Linux 6.1 introduced `MADV_COLLAPSE` flag to perform a best-effort
synchronous collapse of the native pages mapped by the memory range into
transparent huge pages.
Synchronous hugification might be beneficial for at least two reasons:
we are not relying on khugepaged anymore and get an instant feedback if
range wasn't hugified.
If `hpa_hugify_sync` option is on, we'll try to perform synchronously
collapse and if it wasn't successful, we'll fallback to asynchronous
behaviour.
Milliseconds are used a lot in hpa, so it is convenient to have
`nstime_ms_since` function instead of dividing to `MILLION` constantly.
For consistency renamed `nstime_msec` to `nstime_ms` as `ms` abbreviation
is used much more commonly across codebase than `msec`.
```
$ grep -Rn '_msec' include src | wc -l
2
$ grep -RPn '_ms( |,|:)' include src | wc -l
72
```
Function `nstime_msec` wasn't used anywhere in the code yet.
Option `experimental_hpa_strict_min_purge_interval` was expected to be
temporary to simplify rollout of a bugfix. Now, when bugfix rollout is
complete it is safe to remove this option.
During boot, some mutexes are not initialized yet, plus there's no point taking
many mutexes while everything is covered by the global init lock, so the locking
assumptions in some functions (e.g. background_thread_enabled_set()) can't be
enforced. Skip the lock owner check in this case.
After inlining at LTO time, many callsites have input size known which means the
index and usable size can be translated at compile time. However the size-index
lookup table prevents it -- this commit solves that by switching to the compute
approach when the size is detected to be a known const.
HUGEPAGE could be larger on some platforms (e.g. 512M on aarch64 w/ 64K pages),
in which case it would cause grow_retained / exp_grow to over-reserve VMs.
Similarly, make sure the base alloc has a const 2M alignment.
