When receiving on a stream that already failed or has already been closed,
return the matching error code without touching the connection. In case
the connection shows errors, e.g. the server closed, those errors should
not have impact on an already failed/closed stream.
This might mitigate flakiness in pytest 07_13 where unexpected errors
occur after a successful upload.
Closes#20220
We recently allowed a larger send buffer in ngtcp2 streams. This allowed
curl to send more early data then previously when the server was slow in
performing the handshake. This led to flaky test failures when the
amount of early data was larger than expected.
Change test expectations to allow for varying amount of early data.
Ref: #20112Closes#20161
The special handling for draining server connections during a connect
attempt was only done on CURLE_RECV_ERROR. But it may also happen when
ngtcp2 errors on writing data. Check for CURLE_SEND_ERROR also.
Ref: #20112Closes#20162
- asyn-thrdd.c: scope an include.
- apply more clang-format suggestions.
- tidy-up PP guard comments.
- delete empty line from the top of headers.
- add empty line after `curl_setup.h` include where missing.
- fix indent.
- CODE_STYLE.md: add `strcpy`.
Follow-up to 8636ad55df#20088
- lib1901.c: drop unnecessary line.
Follow-up to 436e67f65b#20076Closes#20070
- replace `sendf.h` with `curl_trc.h` where it was included just for it.
- drop unused `curl_trc.h` includes.
- easy: delete obsolete comment about `send.h` include reason.
Also:
- move out `curl_trc.h` include from `sendf.h` and include it directly
in users, where not done already. To flatten the include tree and
to less rely on indirect includes.
- stop including `sendf.h` from other headers, replace it with forward
declaration of `Curl_easy`, as done already elsewhere.
Verified with an all non-unity CI run.
Closes#20061
To make it available for all files. Drop includes from individual
sources. This header was already included from most sources and not
specific to any internal subsystem.
Also to ensure that two system symbol redefines on Windows (`read()` and
`write()`) get applied to all sources. Move them to `curl_setup.h`.
Closes#20056
With 24b36fd stream flow control window sizes have been set too
restrictive, crippling transfer rates when no rate limit is in effect.
Disable ngtcp3 stream window auto-tuning and extend the stream window
from the small initial size to the effective rate limit. If no rate
limit is configured, extend stream window to maximum value right away.
This cannot shrink the stream window later, however. But growing the
limit or removing it, will work mid download.
Fixes#20030
Reported-by: koujaz on github
Closes#20033
Always use curlx_now() when calling Curl_pgrs_now(data). Tests with the
"manual" updates to now proved differ more then 100ms in parallel testing.
Add `curlx_nowp()` to set current time into a struct curltime.
Add `curlx_ptimediff_ms() and friends, passing pointers.
Update documentation.
Closes#19998
Use `data->progress.now` as the timestamp of proecssing a transfer.
Update it on significant events and refrain from calling `curlx_now()`
in many places.
The problem this addresses is
a) calling curlx_now() has costs, depending on platform. Calling it
every time results in 25% increase `./runtest` duration on macOS.
b) we used to pass a `struct curltime *` around to save on calls, but
when some method directly use `curx_now()` and some use the passed
pointer, the transfer experienes non-linear time. This results in
timeline checks to report events in the wrong order.
By keeping a timestamp in the easy handle and updating it there, no
longer invoking `curlx_now()` in the "lower" methods, the transfer
can observer a steady clock progression.
Add documentation in docs/internals/TIME-KEEPING.md
Reported-by: Viktor Szakats
Fixes#19935Closes#19961
Since we no longer traverse the transfers attached to a connection,
change the sparse bitset to just a `uint32_t` counter.
This makes multi_ev the single user of sparse bitsets for transfers
using a socket and allocation failures are handled there correctly.
Refs #19818Closes#19836
Before this patch curl used the C preprocessor to override standard
memory allocation symbols: malloc, calloc, strdup, realloc, free.
The goal of these is to replace them with curl's debug wrappers in
`CURLDEBUG` builds, another was to replace them with the wrappers
calling user-defined allocators in libcurl. This solution needed a bunch
of workarounds to avoid breaking external headers: it relied on include
order to do the overriding last. For "unity" builds it needed to reset
overrides before external includes. Also in test apps, which are always
built as single source files. It also needed the `(symbol)` trick
to avoid overrides in some places. This would still not fix cases where
the standard symbols were macros. It was also fragile and difficult
to figure out which was the actual function behind an alloc or free call
in a specific piece of code. This in turn caused bugs where the wrong
allocator was accidentally called.
To avoid these problems, this patch replaces this solution with
`curlx_`-prefixed allocator macros, and mapping them _once_ to either
the libcurl wrappers, the debug wrappers or the standard ones, matching
the rest of the code in libtests.
This concludes the long journey to avoid redefining standard functions
in the curl codebase.
Note: I did not update `packages/OS400/*.c` sources. They did not
`#include` `curl_setup.h`, `curl_memory.h` or `memdebug.h`, meaning
the overrides were never applied to them. This may or may not have been
correct. For now I suppressed the direct use of standard allocators
via a local `.checksrc`. Probably they (except for `curlcl.c`) should be
updated to include `curl_setup.h` and use the `curlx_` macros.
This patch changes mappings in two places:
- `lib/curl_threads.c` in libtests: Before this patch it mapped to
libcurl allocators. After, it maps to standard allocators, like
the rest of libtests code.
- `units`: before this patch it mapped to standard allocators. After, it
maps to libcurl allocators.
Also:
- drop all position-dependent `curl_memory.h` and `memdebug.h` includes,
and delete the now unnecessary headers.
- rename `Curl_tcsdup` macro to `curlx_tcsdup` and define like the other
allocators.
- map `curlx_strdup()` to `_strdup()` on Windows (was: `strdup()`).
To fix warnings silenced via `_CRT_NONSTDC_NO_DEPRECATE`.
- multibyte: map `curlx_convert_*()` to `_strdup()` on Windows
(was: `strdup()`).
- src: do not reuse the `strdup` name for the local replacement.
- lib509: call `_strdup()` on Windows (was: `strdup()`).
- test1132: delete test obsoleted by this patch.
- CHECKSRC.md: update text for `SNPRINTF`.
- checksrc: ban standard allocator symbols.
Follow-up to b12da22db1#18866
Follow-up to db98daab05#18844
Follow-up to 4deea9396b#18814
Follow-up to 9678ff5b1b#18776
Follow-up to 10bac43b87#18774
Follow-up to 20142f5d06#18634
Follow-up to bf7375ecc5#18503
Follow-up to 9863599d69#18502
Follow-up to 3bb5e58c10#17827Closes#19626
Change the send parameter from `const void *` to `const uint8_t *` and
adapt calling code. Several had already unsigned chars and were casting.
Closes#19729
Add protocol handler flag `PROTOPT_CONN_REUSE` to indicate that the
protocol allows reusing connections for other tranfers. Add that
to all handlers that support it.
Create connections with `conn->bits.close = FALSE` and remove all
the `connkeep()` calls in protocol handlers setup/connect implementations.
`PROTOPT_CONN_REUSE` assures that the default behaviour applies
at the end of a transfer without need to juggle the close bit.
`conn->bits.close` now serves as an additional indication that a
connection cannot be reused. Only protocol handles that allow
reuse need to set it to override the default behaviour.
Remove all `connclose()` and `connkeep()` calls from connection
filters. Filters should not modify connection flags. They are
supposed to run in eyeballing situations where a filter is just
one of many determining the outcome.
Fix http response header handling to only honour `Connection: close`
for HTTP/1.x versions.
Closes#19333
Fix return value indicating to OpenSSL if reference to session is kept
(it is not), so OpenSSL frees it.
Reported-by: Aleksei Bavshin
Fixes#19717Closes#19718
Description of how this works in `docs/internal/RATELIMITS.ms`.
Notable implementation changes:
- KEEP_SEND_PAUSE/KEEP_SEND_HOLD and KEEP_RECV_PAUSE/KEEP_RECV_HOLD
no longer exist. Pausing is down via blocked the new rlimits.
- KEEP_SEND_TIMED no longer exists. Pausing "100-continue" transfers
is done in the new `Curl_http_perform_pollset()` method.
- HTTP/2 rate limiting implemented via window updates. When
transfer initiaiting connection has a ratelimit, adjust the
initial window size
- HTTP/3 ngtcp2 rate limitin implemnented via ack updates
- HTTP/3 quiche does not seem to support this via its API
- the default progress-meter has been improved for accuracy
in "current speed" results.
pytest speed tests have been improved.
Closes#19384
The parsing of the HTTP/1.1 formatted request into the h2/h3 header
structures should detect CURLOPT_CUSTOMREQUEST methods and forward them
correctly.
Add test_01_20 to verify
Fixes#19543
Reported-by: Omdahake on github
Closes#19563
Add new functions in `curlx/warnless.h` for controlled type
conversions:
* curlx_uitouz, convert unsigned into to size_t (should always work)
* curlx_uztoso, convert size_t to curl_off_t, capping at CURL_OFF_T_MAX
* curlx_sztouz, convert ssize_t to size_t, return TRUE when ok
* curlx_sotouz_range, convert curl_off_t to size_t interval, capping
values to interval bounds
Remove some unnecesary casts, convert some internal recv functions
to the "return result, have size_t* arg" pattern.
Closes#19495
Rename `Curl_timeleft()` to `Curl_timeleft_ms()` to make the units in
the returned `timediff_t` clear. (We used to always have ms there, but
with QUIC started to sometimes calc ns as well).
Rename some assigned vars without `_ms` suffix for clarity as well.
Closes#19486
In pytests test_08 with the Caddy server, the new rate-limiting in
ngtcp2 did close the connection because it found "too many" stream data
packet repeats.
It is unclear if this is some Caddy issue or if the ngtcp2 implementaton
is wrong. Or if curl can do anything here.
Reported as https://github.com/ngtcp2/ngtcp2/issues/1850
This PR overwrites the ratelimit defaults in ngtcp2 with ten times
increased values. This makes the errors disappear on macOS.
Enable test_08_04/05 in CI again to see if there are any issues
to be found there. (We had those disabled before having parallel
pytests.)
Closes#19274
Replace the check if a ssl session cache is configured with
a function checking if it is configured *and* if an ssl session
cache is available.
During normal operations, a session cache is always there, however
for "connect-only" transfers this might not be the case. When such
transfers receive new sessions/tickets, they need to silently
discard those and not fail.
Reported-by: Marc Aldorasi
Fixes https://github.com/curl/curl/issues/18983
Closes https://github.com/curl/curl/pull/19251
Adopt ngtcp2_conn_get_stream_user_data which has been available since
ngtcp2 v1.17.0. This improves the time complexity of searching
h3_stream_ctx from O(n) to O(1) where n is the number of stream.
Closes#19132
The choice to continue processing incoming data although the
writeout of the headers/data failed is not obvious. Add a comment
explaining why this is done.
Closes#19093
The transfer loop used to check the socket and if no poll events
were seen, triggered a "DATA_IDLE" event into the filters to let
them schedule times/do things anyway.
Since we no longer check the socket, the filters have been called
already and the DATA_IDLE event is unnecessary work. Remove it.
Closes#19060
The stream blocking might not be the one of the current easy handle.
Look up the stream to be marked as blocking via its stream_id in the
internal hash. Theoretically, this does not have to be one of the h3
streams, so not finding it is not an error.
Fixes#18905
Reported-by: Joshua Rogers
Closes#18906
In both send/recv functions of the ngtcp2 filter, when TLS verification
has failed, jump out by skipping ingress/egress handling.
Reported-by: Joshua Rogers
Closes#18881
After this patch, the codebase no longer overrides system printf
functions. Instead it explicitly calls either the curl printf functions
`curl_m*printf()` or the system ones using their original names.
Also:
- drop unused `curl_printf.h` includes.
- checksrc: ban system printf functions, allow where necessary.
Follow-up to db98daab05#18844
Follow-up to 4deea9396b#18814Closes#18866
Also:
- tests/server: replace local `sstrerror()` with `curlx_strerror()`.
- tests/server: show the error code next to the string, where missing.
- curlx: use `curl_msnprintf()` when building for src and tests.
(units was already using it.)
- lib: drop unused includes found along the way.
- curlx_strerror(): avoid compiler warning (and another similar one):
```
In file included from servers.c:14:
../../lib/../../lib/curlx/strerr.c: In function ‘curlx_strerror’:
../../lib/../../lib/curlx/strerr.c:328:32: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
328 | SNPRINTF(buf, buflen, "%s", msg);
| ^
../../lib/../../lib/curlx/strerr.c:47:18: note: ‘snprintf’ output 1 or more bytes (assuming 2) into a destination of size 1
47 | #define SNPRINTF snprintf
| ^
../../lib/../../lib/curlx/strerr.c:328:7: note: in expansion of macro ‘SNPRINTF’
328 | SNPRINTF(buf, buflen, "%s", msg);
| ^~~~~~~~
```
Follow-up to 45438c8d6f#18823Closes#18840
- better tracing of what system call is used and how often
- ngtcp2: combine vquic_send into larger chunks
- ngtcp2: define own PMTU values and enable MTU probing
- ngtcp2: trace interesting remote transport parameters
Closes#18812
