Replace the `libstubgss.so`-based overload solution with one built into
libcurl at compile-time.
The previous, `LD_PRELOAD`-based, solution was non-portable, allowlisted
for Linux, BSD and Solaris. It also required non-debug builds, which
turned out to be an accidental condition:
7d342c723c. It also required a curl tool
built against a shared libcurl. Detecting this condition wasn't always
accurate, e.g. with certain cmake configurations.
The overload solution also didn't work on macOS, though it theoretically
should have:
- #17653
- #2394
Experiments on making the overload solution work in more envs:
- #17759
That revealed that it also did not work on NetBSD, in CI.
The replacement solution is overloading the necessary GSS-API functions
for test 2056 and 2057 at compile time. It requires a debug-enabled curl
build (due to its insecure nature).
This makes these tests run on all platforms. Including most GSS jobs in
CI, that are running tests. (the exception is old-linux, non-debug jobs,
where it felt overkill to enable debug for this.)
The refactored GSS stub code needs to overload less than before because
it's free to use the official GSS API. (This didn't work with
the overload solution on Alpine for example). It can also use libcurl
functions, allowing to replace `snprintf()` with `msnprintf()`.
OS/400 is also overloading GSS API functions. I haven't tested how this
works after this PR. In theory it should, because this PR doesn't rely
on preprocessor overrides.
Note that for future GSS tests, it may be necessary to stub these GSS
API functions: `gss_inquire_context()`, `gss_unwrap()`, `gss_wrap()`.
They are on codepaths not (yet) touched by tests.
Also:
- stub-gss: check for token buffer overrun.
- stub-gss: replace size macros with `sizeof()`.
- GHA: enable debug for some jobs with GSS.
- GHA/linux: ignore results for 2056 and 2057 in the valgrind job.
They leak the same way as seen with 2077 and 2078.
Ref: 7020ba7979#17462
Ref: 146759716c#14430
- GHA/linux: fix to ignore `gss_import_name()` leaks in valgrind builds.
only.
- lib/vauth/krb5_gssapi: reduce variable scope.
- lib/vauth/spnego_gssapi: reduce variable scope.
- tests/libtest: drop code and build logic dealing with `libstubgss`.
- runtests:
- drop `ld_preload` feature.
- drop special handling of `LD_PRELOAD` env in tests.
- drop logic dealing with shared curl tool detection.
- drop `LD_PRELOAD` envs from tests.
Follow-up to 56d949d31a#1687Closes#17752
Drop `strcasecompare` and `strncasecompare` in favor of libcurl API
calls `curl_strequal` and `curl_strnequal` respectively.
Also drop unnecessary `strcase.h` includes. Include `curl/curl.h`
instead where it wasn't included before.
Closes#17772
Used to be a pointer set (and cleared) by the socket connection filters
to a struct in their contexts. Instead, add a filter query method to
obtain the pointer when needed.
Closes#17385
cfilter/conn: change send/recv function signatures. Unify the
calling/return conventions in our send/receive handling.
Curl_conn_recv(), adjust pnread type
Parameter `pnread` was a `ssize_t *`, but `size_t *` is better since the
function returns any error in its `CURLcode` return value.
Closes#17546
Move curlx_ functions into its own subdir.
The idea is to use the curlx_ prefix proper on these functions, and use
these same function names both in tool, lib and test suite source code.
Stop the previous special #define setup for curlx_ names.
The printf defines are now done for the library alone. Tests no longer
use the printf defines. The tool code sets its own defines. The printf
functions are not curlx, they are publicly available.
The strcase defines are not curlx_ functions and should not be used by
tool or server code.
dynbuf, warnless, base64, strparse, timeval, timediff are now proper
curlx functions.
When libcurl is built statically, the functions from the library can be
used as-is. The key is then that the functions must work as-is, without
having to be recompiled for use in tool/tests. This avoids symbol
collisions - when libcurl is built statically, we use those functions
directly when building the tool/tests. When libcurl is shared, we
build/link them separately for the tool/tests.
Assisted-by: Jay Satiro
Closes#17253
Add a DEBUGASSERT() in Curl_dyn_free() that checks that Curl_dyn_init()
has been performed before.
Fix code places that did it wrong.
Fixes#16725Closes#16775
The issues found fell into these categories, with the applied fixes:
- const was accidentally stripped.
Adjust code to not cast or cast with const.
- const/volatile missing from arguments, local variables.
Constify arguments or variables, adjust/delete casts. Small code
changes in a few places.
- const must be stripped because an API dependency requires it.
Strip `const` with `CURL_UNCONST()` macro to silence the warning out
of our control. These happen at API boundaries. Sometimes they depend
on dependency version, which this patch handles as necessary. Also
enable const support for the zlib API, using `ZLIB_CONST`. Supported
by zlib 1.2.5.2 and newer.
- const must be stripped because a curl API requires it.
Strip `const` with `CURL_UNCONST()` macro to silence the warning out
of our immediate control. For example we promise to send a non-const
argument to a callback, though the data is const internally.
- other cases where we may avoid const stripping by code changes.
Also silenced with `CURL_UNCONST()`.
- there are 3 places where `CURL_UNCONST()` is cast again to const.
To silence this type of warning:
```
lib/vquic/curl_osslq.c:1015:29: error: to be safe all intermediate
pointers in cast from 'unsigned char **' to 'const unsigned char **'
must be 'const' qualified [-Werror=cast-qual]
lib/cf-socket.c:734:32: error: to be safe all intermediate pointers in
cast from 'char **' to 'const char **' must be 'const' qualified
[-Werror=cast-qual]
```
There may be a better solution, but I couldn't find it.
These cases are handled in separate subcommits, but without further
markup.
If you see a `-Wcast-qual` warning in curl, we appreciate your report
about it.
Closes#16142
On apple builds, the gssapi/ldap/securetransport headers deprecate
almost everything which leads to a wall of compiler warnings on use in
code.
Suppress those warning that may hide other warnings/errors.
Closes#15763
- fix socket/sockindex confusion on writes:
The callstack used to end with `Curl_write_plain()` accepting a socket
till 7.87.0. This call got swapped for `Curl_conn_send()`, expecting
a sockindex. `socket_write()` was updated accordingly. Its callers
missed it and continued operating on sockets: `do_sec_send()`,
`sec_write()`, passing it down the stack and `Curl_conn_send()`
resolving it as if it were a sockindex.
It affected FTP Kerberos authentication.
Discovered through MSVC warnings:
```
curl\lib\krb5.c(652,28): warning C4244: 'function': conversion from 'curl_socket_t' to 'int', possible loss of data
curl\lib\krb5.c(654,28): warning C4244: 'function': conversion from 'curl_socket_t' to 'int', possible loss of data
curl\lib\krb5.c(656,26): warning C4244: 'function': conversion from 'curl_socket_t' to 'int', possible loss of data
curl\lib\krb5.c(657,26): warning C4244: 'function': conversion from 'curl_socket_t' to 'int', possible loss of data
curl\lib\krb5.c(665,24): warning C4244: 'function': conversion from 'curl_socket_t' to 'int', possible loss of data
curl\lib\krb5.c(666,24): warning C4244: 'function': conversion from 'curl_socket_t' to 'int', possible loss of data
```
Ref: https://github.com/curl/curl/actions/runs/11846599621/job/33014592805#step:9:32
Follow-up to 5651a36d1a#10280
Bug: https://github.com/curl/curl/pull/15549#issuecomment-2474154067Fixes#15582
- fix uninitialized buffer:
```
curl\lib\krb5.c(288,1): warning C4701: potentially uninitialized local variable '_gssresp' used
```
Ref: https://github.com/curl/curl/actions/runs/11848626645/job/33020501026?pr=15585#step:9:31
- silence unreachable code compiler warning:
```
curl\lib\krb5.c(370,1): warning C4702: unreachable code
```
Ref: https://github.com/curl/curl/actions/runs/11848626645/job/33020501026?pr=15585#step:9:30Closes#15585
- fix MSH3 static symbol clash.
- fix Quiche static symbol clash.
- fix local macro clash with BearSSL header.
- fix local macro clash with OmniOS system header.
```
In file included from ../../lib/urldata.h:197,
from ../../lib/altsvc.c:32,
from libcurlall.c:2:
../../lib/cf-socket.h:55:25: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
55 | #define sa_addr _sa_ex_u.addr
| ^
In file included from ../../lib/urldata.h:197,
from ../../lib/altsvc.c:32,
from libcurlall.c:2:
../../lib/cf-socket.h:55:25: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
55 | #define sa_addr _sa_ex_u.addr
| ^
```
Ref: https://github.com/curl/curl/actions/runs/10738314933/job/29781644299?pr=14772#step:3:6115
Discovered while adding support for "unity" builds for autotools.
Required-by: #14922
Cherry-picked from #14815Closes#14932
```
lib/krb5.c:343:39: warning: cast from 'void **' to 'unsigned char **' increases required alignment from 2 to 8 [-Wcast-align]
(unsigned char **)&_gssresp.value,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
Seen on macOS Intel with Apple clang and brew heimdal 7.8.0_1.
Closes#14433
Adds a `bool eos` flag to send methods to indicate that the data
is the last chunk the invovled transfer wants to send to the server.
This will help protocol filters like HTTP/2 and 3 to forward the
stream's EOF flag and also allow to EAGAIN such calls when buffers
are not yet fully flushed.
Closes#14220
Adds a `bool eos` flag to send methods to indicate that the data is the
last chunk the invovled transfer wants to send to the server.
This will help protocol filters like HTTP/2 and 3 to forward the
stream's EOF flag and also allow to EAGAIN such calls when buffers are
not yet fully flushed.
Closes#14220
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk
The method for sending not just raw bytes, but bytes that are either
"headers" or "body". The send abstraction stack, to to bottom, now is:
* `Curl_req_send()`: has parameter to indicate amount of header bytes,
buffers all data.
* `Curl_xfer_send()`: knows on which socket index to send, returns
amount of bytes sent.
* `Curl_conn_send()`: called with socket index, returns amount of bytes
sent.
In addition there is `Curl_req_flush()` for writing out all buffered
bytes.
`Curl_req_send()` is active for requests without body,
`Curl_buffer_send()` still being used for others. This is because the
special quirks need to be addressed in future parts:
* `expect-100` handling
* `Curl_fillreadbuffer()` needs to add directly to the new
`data->req.sendbuf`
* special body handlings, like `chunked` encodings and line end
conversions will be moved into something like a Client Reader.
In functions of the pattern `CURLcode xxx_send(..., ssize_t *written)`,
replace the `ssize_t` with a `size_t`. It makes no sense to allow for negative
values as the returned `CURLcode` already specifies error conditions. This
allows easier handling of lengths without casting.
Closes#12964
Curl_read/Curl_write clarifications
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer setup of
`conn->sockfd` and `conn->writesockfd` on which connection filter
chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index as
parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming
consistency
- clarify that the special CURLE_AGAIN handling to return `CURLE_OK`
with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is
returned by all other send() variants.
SingleRequest reshuffling
- move functions into request.[ch]
- differentiate between reset and free
- add Curl_req_done() to perform last actions
- add a send `bufq` to SingleRequest for future use in keeping upload data
Closes#12963
https://best.openssf.org/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C++.html
as of 2023-11-29 [1].
Enable new recommended warnings (except `-Wsign-conversion`):
- enable `-Wformat=2` for clang (in both cmake and autotools).
- add `CURL_PRINTF()` internal attribute and mark functions accepting
printf arguments with it. This is a copy of existing
`CURL_TEMP_PRINTF()` but using `__printf__` to make it compatible
with redefinting the `printf` symbol:
https://gcc.gnu.org/onlinedocs/gcc-3.0.4/gcc_5.html#SEC94
- fix `CURL_PRINTF()` and existing `CURL_TEMP_PRINTF()` for
mingw-w64 and enable it on this platform.
- enable `-Wimplicit-fallthrough`.
- enable `-Wtrampolines`.
- add `-Wsign-conversion` commented with a FIXME.
- cmake: enable `-pedantic-errors` the way we do it with autotools.
Follow-up to d5c0351055#2747
- lib/curl_trc.h: use `CURL_FORMAT()`, this also fixes it to enable format
checks. Previously it was always disabled due to the internal `printf`
macro.
Fix them:
- fix bug where an `set_ipv6_v6only()` call was missed in builds with
`--disable-verbose` / `CURL_DISABLE_VERBOSE_STRINGS=ON`.
- add internal `FALLTHROUGH()` macro.
- replace obsolete fall-through comments with `FALLTHROUGH()`.
- fix fallthrough markups: Delete redundant ones (showing up as
warnings in most cases). Add missing ones. Fix indentation.
- silence `-Wformat-nonliteral` warnings with llvm/clang.
- fix one `-Wformat-nonliteral` warning.
- fix new `-Wformat` and `-Wformat-security` warnings.
- fix `CURL_FORMAT_SOCKET_T` value for mingw-w64. Also move its
definition to `lib/curl_setup.h` allowing use in `tests/server`.
- lib: fix two wrongly passed string arguments in log outputs.
Co-authored-by: Jay Satiro
- fix new `-Wformat` warnings on mingw-w64.
[1] 56c0fde389/docs/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C%2B%2B.mdCloses#12489
- refs #11342 where errors with git https interactions
were observed
- problem was caused by 1st sends of size larger than 64KB
which resulted in later retries of 64KB only
- limit sending of 1st block to 64KB
- adjust h2/h3 filters to cope with parsing the HTTP/1.1
formatted request in chunks
- introducing Curl_nwrite() as companion to Curl_write()
for the many cases where the sockindex is already known
Fixes#11342 (again)
Closes#11803
Add an intermediate cast to `void *`, as done everywhere else when
casting from `sockaddr *` to `sockaddr_in *`.
Closes https://github.com/curl/curl/pull/10528
- Curl_write_plain/Curl_read_plain have been eliminated. Last code use
now uses Curl_conn_send/recv so that requests use conn->send/revc
callbacks which defaults to cfilters use.
- Curl_recv_plain/Curl_send_plain have been internalized in cf-socket.c.
- USE_RECV_BEFORE_SEND_WORKAROUND (active on Windows) has been moved
into cf-socket.c. The pre_recv buffer is held at the socket filter
context. `postponed_data` structures have been removed from
`connectdata`.
- the hanger in HTTP/2 request handling was a result of read buffering
on all sends and the multi handling is not prepared for this. The
following happens:
- multi preforms on a HTTP/2 easy handle
- h2 reads and processes data
- this leads to a send of h2 data
- which receives and buffers before the send
- h2 returns
- multi selects on the socket, but no data arrives (its in the buffer already)
the workaround now receives data in a loop as long as there is something in
the buffer. The real fix would be for multi to change, so that `data_pending`
is evaluated before deciding to wait on the socket.
io_buffer, optional, in cf-socket.c, http/2 sets state.drain if lower
filter have pending data.
This io_buffer is only available/used when the
-DUSE_RECV_BEFORE_SEND_WORKAROUND is active, e.g. on Windows
configurations. It also maintains the original checks on protocol
handler being HTTP and conn->send/recv not being replaced.
The HTTP/2 (nghttp2) cfilter now sets data->state.drain when it finds
out that the "lower" filter chain has still pending data at the end of
its IO operation. This prevents the processing from becoming stalled.
Closes#10280
- copy `struct Curl_addrinfo` on filter setup into context
- remove `struct Curl_addrinfoi *` with `struct Curl_sockaddr_ex *` in
connectdata that is set and NULLed by the socket filter
- this means we have no reference to the resolver info in connectdata or
its filters
- trigger the CF_CTRL_CONN_INFO_UPDATE event when the complete filter
chain reaches connected status
- update easy handle connection information on CF_CTRL_DATA_SETUP event.
Closes#10213
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Prior to this change Curl_read_plain would attempt to read the
socket directly. On Windows that's a problem because recv data may be
cached by libcurl and that data is only drained using Curl_recv_plain.
Rather than rewrite Curl_read_plain to handle cached recv data, I
changed it to wrap Curl_recv_plain, in much the same way that
Curl_write_plain already wraps Curl_send_plain.
Curl_read_plain -> Curl_recv_plain
Curl_write_plain -> Curl_send_plain
This fixes a bug in the schannel backend where decryption of arbitrary
TLS records fails because cached recv data is never drained. We send
data (TLS records formed by Schannel) using Curl_write_plain, which
calls Curl_send_plain, and that may do a recv-before-send
("pre-receive") to cache received data. The code calls Curl_read_plain
to read data (TLS records from the server), which prior to this change
did not call Curl_recv_plain and therefore cached recv data wasn't
retrieved, resulting in malformed TLS records and decryption failure
(SEC_E_DECRYPT_FAILURE).
The bug has only been observed during Schannel TLS 1.3 handshakes. Refer
to the issue and PR for more information.
--
This is take 2 of the original fix. It preserves the original behavior
of Curl_read_plain to write 0 to the bytes read parameter on error,
since apparently some callers expect that (SOCKS tests were hanging).
The original fix which landed in 12e1def5 and was later reverted in
18383fbf failed to work properly because it did not do that.
Also, it changes Curl_write_plain the same way to complement
Curl_read_plain, and it changes Curl_send_plain to return -1 instead of
0 on CURLE_AGAIN to complement Curl_recv_plain.
Behavior on error with these changes:
Curl_recv_plain returns -1 and *code receives error code.
Curl_send_plain returns -1 and *code receives error code.
Curl_read_plain returns error code and *n (bytes read) receives 0.
Curl_write_plain returns error code and *written receives 0.
--
Ref: https://github.com/curl/curl/issues/9431#issuecomment-1312420361
Assisted-by: Joel Depooter
Reported-by: Egor Pugin
Fixes https://github.com/curl/curl/issues/9431
Closes https://github.com/curl/curl/pull/9949
Prior to this change Curl_read_plain would attempt to read the
socket directly. On Windows that's a problem because recv data may be
cached by libcurl and that data is only drained using Curl_recv_plain.
Rather than rewrite Curl_read_plain to handle cached recv data, I
changed it to wrap Curl_recv_plain, in much the same way that
Curl_write_plain already wraps Curl_send_plain.
Curl_read_plain -> Curl_recv_plain
Curl_write_plain -> Curl_send_plain
This fixes a bug in the schannel backend where decryption of arbitrary
TLS records fails because cached recv data is never drained. We send
data (TLS records formed by Schannel) using Curl_write_plain, which
calls Curl_send_plain, and that may do a recv-before-send
("pre-receive") to cache received data. The code calls Curl_read_plain
to read data (TLS records from the server), which prior to this change
did not call Curl_recv_plain and therefore cached recv data wasn't
retrieved, resulting in malformed TLS records and decryption failure
(SEC_E_DECRYPT_FAILURE).
The bug has only been observed during Schannel TLS 1.3 handshakes. Refer
to the issue and PR for more information.
Ref: https://github.com/curl/curl/issues/9431#issuecomment-1312420361
Assisted-by: Joel Depooter
Reported-by: Egor Pugin
Fixes https://github.com/curl/curl/issues/9431
Closes https://github.com/curl/curl/pull/9904
- Include arpa/inet.h in all units where htonl is called.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Closes https://github.com/curl/curl/pull/9816
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
- the data needs to be "line-based" anyway since it's also passed to the
debug callback/application
- it makes infof() work like failf() and consistency is good
- there's an assert that triggers on newlines in the format string
- Also removes a few instances of "..."
- Removes the code that would append "..." to the end of the data *iff*
it was truncated in infof()
Closes#7357
