They were using a macro designed for unit tests. It does not fail when
used in libtests. Make similar macros for these tests, and make them
return a failure.
Also:
- makes these two tests align with the rest of libtests, by including
`first.h` instead of `curlcheck.h`.
- since libtests no longer need to depend on tests/unit, drop this
dependency from build scripts.
Closes#17867
To make `ninja units-clang-tidy` target work without manually building
core components first.
Also rename the clang-tidy test target generator macro to align its name
with the built-in `add_custom_target()` function.
Follow-up to c9bb9cd165#17750Closes#17810
Replace the `libstubgss.so`-based overload solution with one built into
libcurl at compile-time.
The previous, `LD_PRELOAD`-based, solution was non-portable, allowlisted
for Linux, BSD and Solaris. It also required non-debug builds, which
turned out to be an accidental condition:
7d342c723c. It also required a curl tool
built against a shared libcurl. Detecting this condition wasn't always
accurate, e.g. with certain cmake configurations.
The overload solution also didn't work on macOS, though it theoretically
should have:
- #17653
- #2394
Experiments on making the overload solution work in more envs:
- #17759
That revealed that it also did not work on NetBSD, in CI.
The replacement solution is overloading the necessary GSS-API functions
for test 2056 and 2057 at compile time. It requires a debug-enabled curl
build (due to its insecure nature).
This makes these tests run on all platforms. Including most GSS jobs in
CI, that are running tests. (the exception is old-linux, non-debug jobs,
where it felt overkill to enable debug for this.)
The refactored GSS stub code needs to overload less than before because
it's free to use the official GSS API. (This didn't work with
the overload solution on Alpine for example). It can also use libcurl
functions, allowing to replace `snprintf()` with `msnprintf()`.
OS/400 is also overloading GSS API functions. I haven't tested how this
works after this PR. In theory it should, because this PR doesn't rely
on preprocessor overrides.
Note that for future GSS tests, it may be necessary to stub these GSS
API functions: `gss_inquire_context()`, `gss_unwrap()`, `gss_wrap()`.
They are on codepaths not (yet) touched by tests.
Also:
- stub-gss: check for token buffer overrun.
- stub-gss: replace size macros with `sizeof()`.
- GHA: enable debug for some jobs with GSS.
- GHA/linux: ignore results for 2056 and 2057 in the valgrind job.
They leak the same way as seen with 2077 and 2078.
Ref: 7020ba7979#17462
Ref: 146759716c#14430
- GHA/linux: fix to ignore `gss_import_name()` leaks in valgrind builds.
only.
- lib/vauth/krb5_gssapi: reduce variable scope.
- lib/vauth/spnego_gssapi: reduce variable scope.
- tests/libtest: drop code and build logic dealing with `libstubgss`.
- runtests:
- drop `ld_preload` feature.
- drop special handling of `LD_PRELOAD` env in tests.
- drop logic dealing with shared curl tool detection.
- drop `LD_PRELOAD` envs from tests.
Follow-up to 56d949d31a#1687Closes#17752
It allows to pass `.h` files only where they are really needed, which is
`EXTRA_DIST` (or `*SOURCES`) for autotools.
Also:
- rename variables to be shorter and consistent.
- drop references to non-local headers. We don't need to pass them as
dist sources.
- drop empty variables and references, after the above.
- server: add placeholder `UTIL_H`.
Closes#17745
- cmake: avoid running clang-tidy twice.
- autotools: do not pass curl/libtest-specific macros.
Also:
- autotools: drop `CFLAG_CURL_SYMBOL_HIDING` from libtests.
Unused since 09437d8cd4#14695Closes#17738
To make all src and test code refer to curlx headers the same way.
Also:
- src: move `curlx.h` include to `tool_setup.h`.
- src/tool_setup.h: drop stray `curlx/timeval.h`.
- servers: de-duplicate `curlx.h` and `curl_setup.h` includes.
- libtests, units: drop stray curlx sub-headers in favor of
`<curlx/curlx.h>`.
- tests: include `curlx.h` with `<>` instead of `""`. To match
other parts of the codebase.
Closes#17680
Replace existing `mk-unity.pl` `--embed` workaround with running
`clang-tidy` manually on individual test source instead. This aligns
with how clang-tidy works and removes `mk-unity.pl` from the solution.
Also:
- mqttd: fix potentially uninitialized buffer by zero filling it.
```
tests/server/mqttd.c:484:41: error: The left operand of '<<' is a garbage value
[clang-analyzer-core.UndefinedBinaryOperatorResult,-warnings-as-errors]
484 | payload_len = (size_t)(buffer[10] << 8) | buffer[11];
| ^
[...]
tests/server/mqttd.c:606:45: error: The left operand of '<<' is a garbage value
[clang-analyzer-core.UndefinedBinaryOperatorResult,-warnings-as-errors]
606 | topiclen = (size_t)(buffer[1 + bytes] << 8) | buffer[2 + bytes];
| ^
```
- sockfilt: fix potential out-of-bound pointer:
```
tests/server/sockfilt.c:1128:33: error: The 2nd argument to 'send' is a buffer
with size 17010 but should be a buffer with size equal to or greater than
the value of the 3rd argument (which is 18446744073709551615)
[clang-analyzer-unix.StdCLibraryFunctions,-warnings-as-errors]
1128 | ssize_t bytes_written = swrite(sockfd, buffer, buffer_len);
| ^
```
- clang-tidy: suppress bogus `bzero()` warnings that happens
inside the notorious `FD_ZERO()` macros, on macOS.
Ref: https://github.com/curl/curl/pull/17680#issuecomment-2991730158Closes#17705
Derive it from `$BUNDLE` instead. autotools seems to be already relying
on `$BUNDLE_SRC` being equal to `$BUNDLE.c`. (I haven't realized this
before aaebb45f58.)
Also drop redundant `nodist_<target>_SOURCE` lines in tunits and units.
Follow-up to aaebb45f58#17688
Follow-up to 2c27a67daa#17590Closes#17692
Used by test 2056 and 2057, in a way that's Linux- & autotools-specific.
This patch builds it for all Unix, syncing cmake with autotools.
Adapt the two tests to find the library in CMake builds as well.
Tested OK on Linux. (CI does not test this. The corresponding jobs build
in debug mode, while the `LD_PRELOAD` feature is locked to non-debug.)
On macOS it didn't load without building everything for aarch64e arch:
"../bld/tests/libtest/libstubgss.dylib' (mach-o file, but is
an incompatible architecture (have 'arm64', need 'arm64e'))"
With that fixed it still did not load correctly and/or the tests did not
pass. So, for macOS these tests remain disabled.
Also:
- GHA/macos: build for aarch64e. (recognized by Apple clang as of this
patch. llvm and gcc fall back to aarch64.)
Follow-up to 56d949d31a#1687Closes#17653
Use it from libtests' `first.c` and thus also from units, and tunits.
Also:
- cmake: drop stray `curltool` lib dependency for units.
- units: stop depending on `src` headers.
- tests/server: drop depending on `src` headers.
(the remaining one listed in the comments, `tool_xattr.h`, was not
actually used from servers.)
- tests/server: drop duplicate curlx headers.
(Except `warnless.h`, which is tricky on Windows.)
Closes#17672
To reduce the diff between tests CMakeFiles.txt, and syncing with
autotools, which already used the `BUNDLE` variable like this.
Also:
- fold lines that went over 132 chars after this change.
- autotools: sync order of macros with cmake.
Closes#17667
Instead of relying on CMake's built-in unity feature, use `mk-unity.pl`,
as already done with autotools. It simplified the build, shortens logs
and makes debugging easier because of the fewer build variations.
It also allows testing / fixing with cmake and those automatically apply
to autotools builds too. cmake builds can be much-much faster, esp.
when working the builds themselves.
It also enables "unity" in old cmake versions. Basically every test
target is a single generated .c source.
Also:
- drop a `lib` unity workaround for libtests with autotools after fixing
the issue in libtests itself. It drops a few exceptions and makes
libcurl build faster (in autotools unity).
- fix another `lib` autotools unity issue and drop the workaround for it
from `mk-unity.pl`. `srcdir` was missing from the header path.
- simplify `mk-unity.pl` command-lines, drop exclusions.
Follow-up to 2c27a67daa#17590Closes#17628
Make test bundles the default. Drop non-bundle build mode.
Also do all the optimizations and tidy-ups this allows, simpler builds,
less bundle exceptions, streamlined build mechanics.
Also rework the init/deinit macro magic for unit tests. The new method
allows using unique init/deinit function names, and calling them with
arguments. This is in turn makes it possible to reduce the use of global
variables.
Note this drop existing build options `-DCURL_TEST_BUNDLES=` from cmake
and `--enable-test-bundles` / `--disable-test-bundles` from autotools.
Also:
- rename test entry functions to have unique names: `test_<testname>`
This removes the last exception that was handled in the generator.
- fix `make dist` to not miss test sources with test bundles enabled.
- sync and merge `tests/mk-bundle.pl` into `scripts/mk-unity.pl`.
- mk-unity.pl: add `--embed` option and use it when `CURL_CLANG_TIDY=ON`
to ensure that `clang-tidy` does not miss external test C sources.
(because `clang-tidy` ignores code that's #included.)
- tests/unit: drop no-op setup/stop functions.
- tests: reduce symbol scopes, global macros, other fixes and tidy-ups.
- tool1621: fix to run, also fix it to pass.
- sockfilt: fix Windows compiler warning in certain unity include order,
by explicitly including `warnless.h`.
Follow-up to 6897aeb105#17468Closes#17590
Move curlx_ functions into its own subdir.
The idea is to use the curlx_ prefix proper on these functions, and use
these same function names both in tool, lib and test suite source code.
Stop the previous special #define setup for curlx_ names.
The printf defines are now done for the library alone. Tests no longer
use the printf defines. The tool code sets its own defines. The printf
functions are not curlx, they are publicly available.
The strcase defines are not curlx_ functions and should not be used by
tool or server code.
dynbuf, warnless, base64, strparse, timeval, timediff are now proper
curlx functions.
When libcurl is built statically, the functions from the library can be
used as-is. The key is then that the functions must work as-is, without
having to be recompiled for use in tool/tests. This avoids symbol
collisions - when libcurl is built statically, we use those functions
directly when building the tool/tests. When libcurl is shared, we
build/link them separately for the tool/tests.
Assisted-by: Jay Satiro
Closes#17253
Also adjust `()` around low-level calls preventing macro overrides via
e.g. `memdebug.h`:
- add for `malloc` and `free`.
- drop for `_open`. (We do not override `_open` in curl.)
Tidy-up: also sync libcurlu custom macro order in cmake with autotools.
Follow-up to f42a279ee3#11928Closes#16742
It seems unnecessary and possibly unexpected to build test servers with
debug-enabled features and memory tracking whenever the tested curl is
built like that (which is a requirement for some tests, so curl is
mostly built like that when running tests.) It also makes building
servers a little bit faster with cmake for the most common cases.
You can apply debug options to `tests/server` with these new options:
- `./configure`: `--enable-server-debug`.
- cmake: `-DENABLE_SERVER_DEBUG`.
Also sync the way we pass these macros in autotools, with CMake builds.
Before this patch, autotools passed them via `curl_config.h`. After this
patch it passes them on the command-line, like cmake builds do.
This patch also make these option no longer passed to examples and
`http/client` in cmake builds, where they were no-ops anyway.
Ref: #15000Closes#16705
Include more sources in unity mode to optimize libtest and tests/server
builds for non-debug-enabled builds, syncing this pattern with `lib` and
`src`.
It reduces build steps from 62 to 47 (-14, -24%) with test bundles.
Without test bundles, from 680 to 642 (-38, -6%).
Follow-up to de0693f249#16274
Follow-up to 3efba94f77#14765
Cherry-picked from #15000Closes#16695
Before this patch curl code was redefining `getaddrinfo` and
`freeaddrinfo` system symbols to plug in its debug wrappers. This was
causing pains to avoid applying the redefinitions to system headers
defining these functions, and to the local debug wrappers. Especially
in unity builds. It also required workarounds for systems where these
symbols are already macros.
Introduce curl-namespaced macros for these functions and use them.
This allows to drop all workarounds and makes it work in all envs,
local targets and unity/bundle combinations.
Also drop GHA/windows workaround and use the same unity batch across
all jobs. Follow-up to 29e4eda631#16272
Ref: #16272
Ref: 71cf0d1fca#14772
Ref: 3efba94f77#14765
Ref: f7d5f47059#14399Closes#16274
And use it from src and tests.
Syncing this functionality between platforms and build targets.
Also: Stop redefining `O_BINARY` in src, and use a local macro with
the same effect. `O_BINARY` is used in `CURL_SET_BINMODE()` to decide
if this functionality is supported, and redefining it makes this check
pass always in unity builds. The check is required for Apple OS, because
it offers a `setmode()` function, successfully detected by both CMake
and autotools, but that function has a different functionality and
signature than that expected by `CURL_SET_BINMODE()`.
Also:
- drop MetaWare High C (MS-DOS) support for set binmode.
- tests/libtest/Makefile.inc: dedupe comments.
- lib/curl_setup_once.h: tidy up feature guards for `io.h`, `fcntl.h`.
Ref: #15652Closes#15787
`Makefile.mk` supported MS-DOS and Amiga, but `./configure` also
supported them in a better tested and more flexible way.
This patch also adds CMake support for MS-DOS/DJGPP and Amiga OS 3.
`Makefile.mk` was not maintained. Delete it in favour of first-tier
build methods.
Also include some non-MS-DOS/AmigaOS-specific tidy-up, see details at
the end of this message.
Details:
- fix/silence all MS-DOS/DJGPP build warnings and issues.
- add MS-DOS support to cmake.
- default to `ENABLE_THREADED_RESOLVER=OFF` for MS-DOS.
- add support for `WATT_ROOT`.
- use static libcurl with MS-DOS.
- fixup default CMake suffixes/prefixes for DJGPP.
- disable hidden symbols for MS-DOS. Not supported on MS-DOS.
- opt-in MS-DOS into `USE_UNIX_SOCKETS`.
- improve MS-DOS support in autotools.
- default to `--disable-threaded-resolver` for MS-DOS.
- make sure to use `close_s()` (from Watt-32) with autotools and cmake.
`Makefile.mk` used it before this patch.
- GHA: add DJGPP cmake (~30s) and autotools (~60s) build jobs.
Also build tests and examples with cmake.
- improve AmigaOS support in autotools:
- configure: detect `CloseSocket()` when it's a macro.
- configure: fix `IoctlSocket` detection on AmigaOS.
- curl-amissl.m4: pass AmiSSL libs to tests/servers.
- add AmigaOS3 support to cmake:
- cmake: fix `HAVE_IOCTLSOCKET_CAMEL` and
`HAVE_IOCTLSOCKET_CAMEL_FIONBIO` detections.
- set necessary system libs.
- add AmiSSL support.
- inet_ntop, inet_pton: fix using it for AmigaOS. cmake detects them,
and they did not compile with AmigaOS.
- cmake: better sync `gethostname` detection with autotools.
Fixes detection for AmigaOS, where `gethostname` is a macro.
- cmake: fix `sys/utime.h` detection on AmigaOS.
- cmake: force-disable `getaddrinfo` for AmigaOS.
- cmake: tweak threading and static/shared default for AmigaOS.
- cmake: rely on manual variable `AMIGA` to enable the platform.
- GHA: add AmigaOS cmake and autotools (~45s) jobs.
Also build tests and examples with cmake.
- INSTALL: update MS-DOS and AmigaOS build instructions.
- amigaos: fix `-Wpointer-sign` and
`zero or negative size array '_args'` in `Printf()`.
- amigaos: fix `-Wpointer-sign`
- amigaos: fix `-Wredundant-decls` `errno` and `h_errno`.
- amigaos: brute-force silence `lseek()` size warnings.
- amigaos: server/resolve: silence `-Wdiscarded-qualifiers`.
- amigaos: server/resolve: fix `-Wpointer-sign`.
- amigaos: fix `CURL_SA_FAMILY_T` type.
- nonblock: prefer `HAVE_IOCTLSOCKET_CAMEL_FIONBIO` for AmigaOS.
`ioctl` is also detected, but fails when used. Make the above override
it for a successful build.
Authored-by: Darren Banfi
Fixes#15537Closes#15603
- tftpd: prefer `HAVE_IOCTLSOCKET_CAMEL_FIONBIO` for AmigaOS.
- tftpd: tidy-up conditional code.
- curl: set stack size to 16384 for AmigaOS3/4
Overriding the default 4096.
Suggested-by: Darren Banfi
Ref: https://github.com/curl/curl/pull/15543#issuecomment-2498783123
Ref: https://wiki.amigaos.net/wiki/Controlling_Application_Stack
- functypes.h: fix `SEND_QUAL_ARG2` for AmigaOS.
- tftp: add missing cast in sendto() call for AmigaOS.
- getinfo: fix warning with AmigaOS.
- tool_operate: silence warning with AmigaOS
- amigaos: fix building libtests due to missing `RLIMIT_NOFILE`.
- curl_gethostname: silence warning for AmigaOS.
- ftp: silence `-Wtype-limits` for AmigaOS.
- libtest: fix timeval initialization for AmigaOS.
- examples: fix `timeval` initialization for AmigaOS.
- examples: silence warning for AmigaOS.
- configure: fix IPv6 detection for cross-builds.
- netrc: fix to build with AmigaOS cleanly.
- buildinfo: detect and add `DOS` tag for MS-DOS builds.
- buildinfo: add `AMIGA` to buildinfo.txt in auttools.
- build: move `USE_WATT32` macro definition to cmake/configure.
Non-MS-DOS/AmigeOS-specific tidy-ups:
- configure: sync `sa_family_t` detection with cmake.
- configure: sync `ADDRESS_FAMILY` detection signals with cmake.
- doh: use `CURL_SA_FAMILY_T`.
- lib: drop mingw-specific `CURL_SA_FAMILY_T` workaround.
- cmake: extend instead of override check-specific
configurations/requirements.
This allows to honor global requirements added earlier.
Necessary for AmigaOS for example.
- cmake: omit warning on disabled IPv6 for MS-DOS and AmigaOS.
No IPv6 support on these platforms. Also sync with autotools.
- lib1960: use libcurl `inet_pton()` wrapper.
- cmake: detect LibreSSL (to match autotools).
- cmake: say the specific OpenSSL flavour detected.
- hostip: add missing `HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID` guard.
- lib: simplify classic mac feature guards.
Follow-up to a8861b6ccd#9764Closes#15543
Prefix (or suffix) curl-defined macro and function names with `curl`.
To avoid collisions with non-curl CMake and to make them recognizable
as curl-specific calls.
Closes#15498
It reduces the number of synonym variables in the code.
Makes it easier to grok and grep.
- replace `CURL_SOURCE_DIR`
with `PROJECT_SOURCE_DIR`.
- replace `CURL_BINARY_DIR`
with `PROJECT_BINARY_DIR` or `CMAKE_CURRENT_BINARY_DIR`.
- replace a single use of `CMAKE_BINARY_DIR`
with `PROJECT_BINARY_DIR`.
- replace `CMAKE_CURRENT_*_DIR`
with `PROJECT_*_DIR` where it makes the code more uniform.
- quote an argument (formatting).
Closes#15331
By renaming from a temporary file name to the .c once completed. This
avoids the risk that the checksrc job tries to verify the file before it
is complete, in parallel build setups.
Reported-by: Dan Frandrich
Fixes#15258Closes#15327
The SSL_Session object is mutated during connection inside openssl,
and it might not be thread-safe. Besides, according to documentation
of openssl:
```
SSL_SESSION objects keep internal link information about the session
cache list, when being inserted into one SSL_CTX object's session
cache. One SSL_SESSION object, regardless of its reference count,
must therefore only be used with one SSL_CTX object (and the SSL
objects created from this SSL_CTX object).
```
If I understand correctly, it is not safe to share it even in a
single thread.
Instead, serialize the SSL_SESSION before adding it to the cache,
and deserialize it after retrieving it from the cache, so that no
concurrent write to the same object is infeasible.
Also
- add a ci test for thread sanitizer
- add a test for sharing ssl sessions concurrently
- avoid redefining memory functions when not building libcurl, but
including the soruce in libtest
- increase the concurrent connections limit in sws
Notice that there are fix for a global data race for openssl which
is not yet release. The fix is cherry pick for the ci test with
thread sanitizer.
d8def79838Closes#14751
Before this patch, `libhostname.so` and `chkhostname` were a test
facility for overriding `gethostname()` in non-debug builds on
Linux and other Unix platforms supporting `LD_PRELOAD`.
`gethostname()` has a single use with SMTP.
The alternative way to override `gethostname()` is building in debug
mode, which allows to do this via the `CURL_GETHOSTNAME` env, on all
platforms.
Drop the `LD_PRELOAD` solution in favour of the above.
Also:
- delete inactive NTLM code with a `gethostname()` call made from it.
- streamline NTLM code by dropping a `printf()` and a macro.
- tests: stop setting `CURL_GETHOSTNAME` where unnecessary.
Closes#14695
- show `OpenSSL v3+` when detected (as in `./configure`).
(this string also makes its way to `curl-config`.)
- prefer `unset(VAR)` over `set(VAR)`.
Same effect, but `unset()` tells the intent unambiguously.
https://cmake.org/cmake/help/latest/command/set.html
- drop "implementation" from an `option()` description.
- FindGSS: replace legacy keyword alias with modern alternative.
https://cmake.org/cmake/help/latest/command/get_filename_component.html
- move `CURL_STATIC_CRT` logic next to its `option()`.
- improve order of `libcurl.pc`/`curl-config` variable init lines.
- tests: drop/shorten custom target names.
They inflated generated make files by 550KB.
Keep target name logic for sync between code snippets.
Follow-up to a2ef5d36b3#14660
- clear a variable after use.
- restore `STATUS` for `Features:`/`Protocols:` `message()`s:
Without it the output goes to stderr, and appears in red in CMake GUI.
It doesn't seem possible to show a line on stdout without leading
underscores to match `curl -V` and `./configure` output.
Partial revert of acbc6b703f#14197
- WindowsCache: move `HAVE_LINUX_TCP_H` into the header group.
- move strings to the same line as their `STRING` keyword.
- formatting in generated code.
- delete bogus comment.
- unfold lines for readability.
- fix a too long line. (for cmakelint)
- missing quotes, whitespace, comments.
Closes#14610
- reuse local variable names.
- sync `PROJECT_LABEL`, add where missing.
- namespace all target names.
- bind header directories to each target.
- tests/server: limit `CURL_STATICLIB` to Windows (as in autotools.)
- drop functions with a single caller.
Closes#14660
- move variable dump to a GHA foldable group.
- minimize scope for an include().
- rename `HIDES_CURL_PRIVATE_SYMBOLS` to `CURL_HIDES_PRIVATE_SYMBOLS`,
to keep it in the curl namespace.
- drop quotes from a version number.
- add missing `Makefile.inc` var refs to comment.
- FindNGTCP2: rename internal var to underscore/lowercase.
- FindBearSSL, FindGSS: whitespace.
Closes#14571
- set `CARES_NO_DEPRECATED` to avoid c-ares deprecation warnings.
Like autotools does.
- drop unused c-ares header directory when building libtests and test
servers.
- disable TrackMemory (aka `CURLDEBUG`) feature for MSVC builds.
It fails on test 558 and 1330, saying that TrackMemory isn't working.
Left a FIXME about it.
- GHA/macos: enable c-ares in a cmake job.
- GHA/windows: enable c-ares in MSVC job.
Fixes#14202
- GHA/windows: add c-ares mingw autotools job with tests.
(move `--with-windows-unicode` option from 'default' job to
this one to keep the former "default".)
Put these tests on ignore for now:
```
FAIL 472: 'aws-sigv4 with query' HTTP, aws-sigv4
FAIL 1299: 'Send "OPTIONS *" with --request-target' HTTP, --request-target
FAIL 1613: 'Send "OPTIONS *" with --request-target to a proxy' HTTP, HTTP proxy, --request-target
```
Ref: https://github.com/curl/curl/actions/runs/10388126947/job/28765761441#step:15:5902
472: fails with mingw despite Unicode enabled.
1299, 1613: seem like a case of expanding '*' to a filename.
- GHA/windows: enable c-ares in mingw cmake job.
Closes#14541
- bearssl, c-ares, gss, libpsl, libssh2, mbedtls:
Before this patch these Find modules returned results via
`<NAME>_INCLUDE_DIR` and `<NAME>_LIBRARY`.
This patch makes them return `<NAME>_INCLUDE_DIRS` (note the `S`)
and `<NAME>_LIBRARIES` like other modules already did.
- bearssl, mbedtls:
Before this patch these Find modules allowed custom configuration
via `<NAME>_INCLUDE_DIRS` (note the `S`).
This patch makes them accept `<NAME>_INCLUDE_DIR`, like the rest of
the modules did.
Deprecate the old variables, but keep accepting them for
compatibility.
- bearssl: add missing `mark_as_advanced()` call.
Closes#14542
- quote string literals.
In the hope it improves syntax-highlighting and readability.
- use lowercase, underscore-prefixed local var names.
As a hint for scope, to help readability.
- prefer `pkg_search_module` (over `pkg_check_modules`).
They are the same, but `pkg_search_module` stops searching
at the first hit.
- more `IN LISTS` in `foreach()`.
- OtherTests.cmake: clear `CMAKE_EXTRA_INCLUDE_FILES` after use.
- add `PROJECT_LABEL` for http/client and unit test targets.
- sync `Find*` module comments and formatting.
- drop a few local variables.
- drop bogus `CARES_LIBRARIES` from comment.
- unquote numeric literal.
Follow-up to acbc6b703f#14197Closes#14388
- sync build-dir/source-dir header path order with autotools, by
including build-dir first, then source-dir.
This prevents out-of-tree builds breaking due to leftover generated
headers in the source tree.
- tests/unit: move `src` ahead of `libtest` in header path, syncing with
autotools.
- stop adding non-existing generated `include` dir to header path.
There are no generated `include` headers and this directory is either
missing in out-of-tree builds or the same as the one already added
globally via the root `CMakeLists.txt`.
- lib: stop adding a duplicate source include directory to the header
path.
It's already added globally via the root `CMakeLists.txt`.
- lib: stop adding the project root to the header path.
- docs/examples: drop internal header paths.
Examples do not and should not use internal headers.
- replace `curl_setup_once.h` in comments with `curl_setup.h`,
the header actually used, and also referred to in autotools comments.
- add comment why we need `src` in include path for `tests/server`.
- add quotes around header directories.
Closes#14416
- tidy-up comments.
- use lowercase, underscore prefixed names for internal variables.
- use `IN LISTS` and `IN ITEMS` in `foreach()` loops.
- rename variable name `OUTPUT` to a more distinctive one.
- tidy-up `STREQUAL` syntax.
- delete commented code.
- indent/whitespace.
Closes#14197
Enable more picky compiler warnings. I've found these options in the
nghttp3 project when implementing the CMake quick picky warning
functionality for it [1].
`-Wunused-macros` was too noisy to keep around, but fixed a few issues
it revealed while testing.
- autotools: reflect the more precisely-versioned clang warnings.
Follow-up to 033f8e2a08#12324
- autotools: sync between clang and gcc the way we set `no-multichar`.
- autotools: avoid setting `-Wstrict-aliasing=3` twice.
- autotools: disable `-Wmissing-noreturn` for MSYS gcc targets [2].
It triggers in libtool-generated stub code.
- lib/timeval: delete a redundant `!MSDOS` guard from a `WIN32` branch.
- lib/curl_setup.h: delete duplicate declaration for `fileno`.
Added in initial commit ae1912cb0d
(1999-12-29). This suggests this may not be needed anymore, but if
it does, we may restore this for those specific (non-Windows) systems.
- lib: delete unused macro `FTP_BUFFER_ALLOCSIZE` since
c1d6fe2aaa.
- lib: delete unused macro `isxdigit_ascii` since
f65f750742.
- lib/mqtt: delete unused macro `MQTT_HEADER_LEN`.
- lib/multi: delete unused macro `SH_READ`/`SH_WRITE`.
- lib/hostip: add `noreturn` function attribute via new `CURL_NORETURN`
macro.
- lib/mprintf: delete duplicate declaration for `Curl_dyn_vprintf`.
- lib/rand: fix `-Wunreachable-code` and related fallouts [3].
- lib/setopt: fix `-Wunreachable-code-break`.
- lib/system_win32 and lib/timeval: fix double declarations for
`Curl_freq` and `Curl_isVistaOrGreater` in CMake UNITY mode [4].
- lib/warnless: fix double declarations in CMake UNITY mode [5].
This was due to force-disabling the header guard of `warnless.h` to
to reapply it to source code coming after `warnless.c` in UNITY
builds. This reapplied declarations too, causing the warnings.
Solved by adding a header guard for the lines that actually need
to be reapplied.
- lib/vauth/digest: fix `-Wunreachable-code-break` [6].
- lib/vssh/libssh2: fix `-Wunreachable-code-break` and delete redundant
block.
- lib/vtls/sectransp: fix `-Wunreachable-code-break` [7].
- lib/vtls/sectransp: suppress `-Wunreachable-code`.
Detected in `else` branches of dynamic feature checks, with results
known at compile-time, e.g.
```c
if(SecCertificateCopySubjectSummary) /* -> true */
```
Likely fixable as a separate micro-project, but given SecureTransport
is deprecated anyway, let's just silence these locally.
- src/tool_help: delete duplicate declaration for `helptext`.
- src/tool_xattr: fix `-Wunreachable-code`.
- tests: delete duplicate declaration for `unitfail` [8].
- tests: delete duplicate declaration for `strncasecompare`.
- tests/libtest: delete duplicate declaration for `gethostname`.
Originally added in 687df5c8c3
(2010-08-02).
Got complicated later: c49e9683b8
If there are still systems around with warnings, we may restore the
prototype, but limited for those systems.
- tests/lib2305: delete duplicate declaration for
`libtest_debug_config`.
- tests/h2-download: fix `-Wunreachable-code-break`.
[1] a70edb08e9/cmake/PickyWarningsC.cmake
[2] https://ci.appveyor.com/project/curlorg/curl/builds/48553586/job/3qkgjauiqla5fj45?fullLog=true#L1675
[3] https://github.com/curl/curl/actions/runs/6880886309/job/18716044703?pr=12331#step:7:72https://github.com/curl/curl/actions/runs/6883016087/job/18722707368?pr=12331#step:7:109
[4] https://ci.appveyor.com/project/curlorg/curl/builds/48555101/job/9g15qkrriklpf1ut#L204
[5] https://ci.appveyor.com/project/curlorg/curl/builds/48555101/job/9g15qkrriklpf1ut#L218
[6] https://github.com/curl/curl/actions/runs/6880886309/job/18716042927?pr=12331#step:7:290
[7] https://github.com/curl/curl/actions/runs/6891484996/job/18746659406?pr=12331#step:9:1193
[8] https://github.com/curl/curl/actions/runs/6882803986/job/18722082562?pr=12331#step:33:1870Closes#12331
This patch adds the ability to build a static and shared libcurl library
in a single build session. It also adds an option to select which one to
use when building the curl executable.
New build options:
- `BUILD_STATIC_LIBS`. Default: `OFF`.
Enabled automatically if `BUILD_SHARED_LIBS` is `OFF`.
- `BUILD_STATIC_CURL`. Default: `OFF`.
Requires `BUILD_STATIC_LIBS` enabled.
Enabled automatically if building static libcurl only.
- `STATIC_LIB_SUFFIX`. Default: empty.
- `IMPORT_LIB_SUFFIX`. Default: `_imp` if implib filename would collide
with static lib name (typically with MSVC) in Windows builds.
Otherwise empty.
Also:
- Stop setting the `CURL_STATICLIB` macro via `curl_config.h`, and pass
it directly to the compiler. This also allows to delete a condition
from `tests/server/CMakeLists.txt`.
- Complete a TODO by following the logic used in autotools (also for
`LIBCURL_NO_SHARED`), and set `-DCURL_STATICLIB` in `Cflags:` of
`libcurl.pc` for _static-only_ curl builds.
- Convert an existing CI test to build both shared and static libcurl.
Closes#11505
Aka "jumbo" or "amalgamation" builds. It means to compile all sources
per target as a single C source. This is experimental.
You can enable it by passing `-DCMAKE_UNITY_BUILD=ON` to cmake.
It requires CMake 3.16 or newer.
It makes builds (much) faster, allows for better optimizations and tends
to promote less ambiguous code.
Also add a new AppVeyor CI job and convert an existing one to use
"unity" mode (one MSVC, one MinGW), and enable it for one macOS CI job.
Fix related issues:
- add missing include guard to `easy_lock.h`.
- rename static variables and functions (and a macro) with names reused
across sources, or shadowed by local variables.
- add an `#undef` after use.
- add a missing `#undef` before use.
- move internal definitions from `ftp.h` to `ftp.c`.
- `curl_memory.h` fixes to make it work when included repeatedly.
- stop building/linking curlx bits twice for a static-mode curl tool.
These caused doubly defined symbols in unity builds.
- silence missing extern declarations compiler warning for ` _CRT_glob`.
- fix extern declarations for `tool_freq` and `tool_isVistaOrGreater`.
- fix colliding static symbols in debug mode: `debugtime()` and
`statename`.
- rename `ssl_backend_data` structure to unique names for each
TLS-backend, along with the `ssl_connect_data` struct member
referencing them. This required adding casts for each access.
- add workaround for missing `[P]UNICODE_STRING` types in certain Windows
builds when compiling `lib/ldap.c`. To support "unity" builds, we had
to enable `SCHANNEL_USE_BLACKLISTS` for Schannel (a Windows
`schannel.h` option) _globally_. This caused an indirect inclusion of
Windows `schannel.h` from `ldap.c` via `winldap.h` to have it enabled
as well. This requires `[P]UNICODE_STRING` types, which is apperantly
not defined automatically (as seen with both MSVS and mingw-w64).
This patch includes `<subauth.h>` to fix it.
Ref: https://github.com/curl/curl/runs/13987772013
Ref: https://dev.azure.com/daniel0244/curl/_build/results?buildId=15827&view=logs&jobId=2c9f582d-e278-56b6-4354-f38a4d851906&j=2c9f582d-e278-56b6-4354-f38a4d851906&t=90509b00-34fa-5a81-35d7-5ed9569d331c
- tweak unity builds to compile `lib/memdebug.c` separately in memory
trace builds to avoid PP confusion.
- force-disable unity for test programs.
- do not compile and link libcurl sources to libtests _twice_ when libcurl
is built in static mode.
KNOWN ISSUES:
- running tests with unity builds may fail in cases.
- some build configurations/env may not compile in unity mode. E.g.:
https://ci.appveyor.com/project/curlorg/curl/builds/47230972/job/51wfesgnfuauwl8q#L250
Ref: https://github.com/libssh2/libssh2/issues/1034
Ref: https://cmake.org/cmake/help/latest/prop_tgt/UNITY_BUILD.html
Ref: https://en.wikipedia.org/wiki/Unity_buildCloses#11095
The only user of this define was 'chkdecimalpoint' - a special purpose
test tool that was built but not used anymore (since 17c18fbc3 - Apr
2020).
Closes#10908
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
