- make the libssh backend do the same fallback for private and public key
filename as libssh2 already did and is documented behavior. This now uses a
common function.
- set the file names already in setup_connection if public key auth is
requested, so that the connection reuse functions can use the
information when checking for existing connections to reuse
- rename the oddly named struct fields 'rsa' to 'priv_key' and 'rsa_pub'
to 'pub_key' to better reflect their purposes
Fixes#22243Closes#22244
To make it clear what they are and according to our styleguide.
- Curl_cf_ip_happy_insert_after
- Curl_ftp_conns_match
Found with:
$ nm lib/.libs/libcurl.a | grep ' T ' | grep -vi ' curl'
Closes#22245
When TLS is verified via Apple SecTrust, openssl internal state is a
verification faiure (that is how it works, we use sectrust when openssl
fails to verify and natice ca store is enabled).
OpenSSL stores this verification status inside its TLS session objects.
On reuse, we see an unverified session and do not reuse it for a
verified connect attempt. While this is a performance penalty for most
connections, it *fails* on ftps:// transfers where servers expect
session reuse on DATA connections.
Fix this by remembering that TLS and a session was verified by sectrust
and allow reuse of such sessions for new connect attempts that also use
sectrust.
Closes#22235
A sasl zero-length normal response is an empty string, unlike an initial
response. Since the encoding of a zero-length initial response is
protocol dependent, move its handling to the protocol-specific sendauth
procedure. Similarly, do not check for an '=' server message, as this
should normally never occur.
Update the erroneous tests accordingly.
Closes#22218
A gzip Content-Encoding response holding more than one gzip member made
curl decode the first member and then fail the transfer with a bare
CURLE_WRITE_ERROR and no hint about the cause. Detect the trailing
member and fail with a message that explains what happened.
Fixes#22156Closes#22172
It is traditionally defined by autotools to detect the presence of set
of standard C89 headers. autoconf 2.70 (2020-12-08) reduced the headers
covered to `stdlib.h`, `string.h`. After 2.59d (2006-06-05) obsoleting
it earlier. CMake replicated this detection, and curl included
`curl/stdcheaders.h` if standard headers were missing. However, such
condition could never happen because curl sources already assume all
checked standard headers (`stdarg.h`, `stdlib.h`, `string.h`) and
include them unconditionally.
Since this is an unused feature detection and an impossible fallback
path, drop them from CMake and curl's source. autotools continues to do
the detection by default, but its result is unused after this patch.
This leaves public `curl/stdcheaders.h` unused from within the codebase.
Refs:
f0c7c4255386c213d0e3
Follow-up to 65dae4ad80#22191
Follow-up to 4c5307b456
Ref: ae1912cb0dCloses#22206
Also repurpose existing build-time feature checks into unit test 1961,
to verify.
Prior to this patch these functions were auto-detected with both
autotools and cmake. In case of autotools there was an extra
verification phase ensuring the functions work as expected. This step
required running the function, thus was limited to non-cross-builds. For
cross-builds and CMake it always used the system implementation if
present. On Windows it always used the local implementation, because
availability/use is complicated there.
After this patch all platforms, always use the local implementation,
which is known to be accurate. This makes curl behave more consistently,
and simplifies the build process, a fixes cross-builds and CMake
auto-detection differences.
Also:
- test1960: enable unconditionally.
- checksrc: disallow globally, allowlist in `block_ip.c` example.
- dnsd: verify ntop result for NULL before passing to printf.
Ref: https://github.com/curl/curl/pull/22137#issuecomment-4797440983
Ref: #22137
Ref: 8537a5b0bc#16577Closes#22170
* format `data->state.aptr.host` without crlf, so signatures do not need
to strip it again. Add the crlf when adding the header to the request
dynbuf
* check `connect-to` strings on normalized hostname and user supplied
hostname (when those differ)
* libssh: always use the peer for setting ssh option SSH_OPTIONS_HOST,
preserve ipv6 [] enclosure, use IDN converted hostname otherwise. This
is the libssh documented expectation.
Do NOT use strings from URL parsing.
Closes#22128
By exposing and reusing existing custom type via `vtls/openss.h`.
Also:
- GHA/curl-for-win: test in CI by enabling building tests.
Cost is 45s per job, so limit it to the gcc job.
Seen with Windows x64 gcc (not tested in CI prior to this patch):
```
tests/libtest/lib1587.c:50:7: error: conversion from 'opt1587' {aka 'long long unsigned int'} to 'long int' may change value [-Werror=conversion]
50 | SSL_CTX_set_options(info->internals, opts);
| ^~~~~~~~~~~~~~~~~~~
tests/libtest/lib1587.c:59:7: error: conversion from 'opt1587' {aka 'long long unsigned int'} to 'long int' may change value [-Werror=conversion]
59 | SSL_set_options(info->internals, opts);
| ^~~~~~~~~~~~~~~
```
Ref: https://github.com/curl/curl/actions/runs/28258372229/job/83727170184?pr=22195#step:3:4884
Ref: da2f05e6f6#22198
Ref: 6163566461#22197
Follow-up to 3e40ccb875#21290
Follow-up to 2db8ae480f#17809#17801Closes#22195
- cmp-pkg-config.sh: replace `-r -f` with `-rf` to match rest of repo.
- configure.ac: add double quotes for robustness (not a bug).
- curl-openssl.m4: merge nested `if`s.
- CurlTests.c: drop `!= 0`, also to sync with m4.
- CurlTests.c: replace `example.com` with `localhost` in
`gethostbyname()` feature test code. (compile-only, not a bug)
- GHA/http3-linux: drop literal `true` from bool expression.
- lib650: drop redundant `&`.
- move variable/call to left-hand side of equality checks, where
missing.
- perl: detach `<`/`>` from filename in `open()`, where missing.
- schannel: apply two nit fixes lost in rebase.
- scripts/verify-release: drop redundant double quotes.
- scripts/verify-release: exit with error code on error.
- synctime: replace magic numbers with `sizeof()`.
- telnet: add missing parentheses to macro value.
- tests/Makefile.am: use single quotes.
- tool_operate: drop redundant `break` after `return` in VMS code.
- unit2413: drop unused NULL pointer + free call.
- unit2413: fix duplicate test case name.
- urlapi: drop redundant parentheses.
- urlapi: drop `CURL_UNCONST()` that became redundant.
Closes#22186
A custom header name padded with blanks (`Authorization :`) missed the
exact-length compare and slipped past the cross-host Authorization and
Cookie drop, forwarding the header to the redirect target. Trim the
parsed name in both the request and proxy CONNECT header builders.
Closes#22178
Remove members of `struct urlpieces` that now live in peers/creds.
Change all remaining uses of those urlpieces.
When comparing schemes, use the protocol constants.
Closes#22171
Do not check if a particular connection is alive or not more than once
every second. We did this on every connection reuse which is overkill
when sending many requests to the same host.
Closes#22169
- there is a risk for a nasty recursive situation
- we avoid certain risks that the pause call changes things so that when
returning from the callback, the state of some internals is undefined
and we need to reload which is easy to miss
- we can't think of legitiate use cases for doing this. This is
basically just the new favorite point for AI and security researchers
to find hypothetical problems
Closes#22179
- GHA/windows: mention `IgnoreStandardErrorWarningFormat=true`
in comment.
- cmake: fix MIT/GNU GSS order in messages.
- drop some exclamation marks from messages.
- drop redundant ending newlines from messages.
- fold/unfold where possible.
- fix indent, whitespace, typos and other nits.
Closes#22185
Do not allocated an internal port string, just keep and number and a bit
if it is present. Format the port string in a local buffer when someone
asks for it and copy that.
This avoid the format/alloc penalty when parsing URLs and no one ever
asking for the port string.
(And there will be a method to get the uint16_t value directly in
another PR)
Closes#22167
- Bypass cert verification if verifypeer is disabled.
Prior to this change libcurl lacked the ability to bypass certificate
verification for Windows native LDAP (USE_WIN32_LDAP). A comment said
"Win32 LDAP SDK does not support insecure mode without CA!" but I found
that we can bypass the check by setting a verify callback to override
Windows' internal verify check.
Closes https://github.com/curl/curl/pull/22152
The buffer is freed on the next instruction via `Curl_meta_remove()`'s
destructor.
Reported-by: netspacer.research
Follow-up to 1ebd92d0fd#16384Closes#22133
If any sublabel is longer than 63 octets, abort. This then also catches
compression attempts.
Verified in test 1658
Reported-by: netspacer.research
Closes#22124
To avoid mistakes or abuse to cause problems. Many public DNS providers
cap their cache times to this.
Verify in test 1650
Reported-by: netspacer.research
Closes#22122
When the HTTP Upgrade to websockets already carries ws frame data,
buffer that data at connection level and not in the ws decoder.
Adding new cfilter `cf_recvbuf` to buffer a fixed amont of data
to be received later. When the data is received, the filter
passes further recv call through to its subfilter.
Fixes#22107
Reported-by: sideshowbarker on github
Closes#22111
Fix a regression in curl 8.21.0-rc3: Check whether the host and the "connect
to host" are equal before initializing the proxy. If they are equal, switching
to tunnel mode is not necessary.
Follow-up to 73daec6Closes#22110
This option is used for both TLS and SSH so it needs to be handled
even in TLS-disabled builds
Mention this in the man page as well.
Follow-up to 52fa8d9
Pointed out by Codex Security
Closes#22121
