curl_easy_reset() did not reset the `rewind_read` flag. This caused any
handles that previously had a CURLE_SEND_FAIL_REWIND error to get stuck
with that error, failing any subsequent requests, even if they didn't
have any body at all.
Verified in test 3034
Fixes#18206Closes#18207
The splay tree is a tree where each easy handle can be added *once*. The
expire time for that node is the closest expire time for that easy
handle.
Easy handles can however have more expire times queued up, so when the
node is removed from the splay tree because it is the next in line to
take care of, we must check if there is another expire time in the queue
and then add the node back into the splay.
Failing to do the later part, the calling of add_next_timeout after
Curl_splaygetbest, would leave the state.expiretime on the previous time
stamp, which when could make the next call to Curl_splaygetbest use the
wrong time stamp and get a wrong node out, causing trouble.
Reported-by: letshack9707 on hackerone
Closes#18201
Make variants for transfers that send/receive or do both with just the
parameters they need. Split out the shutdown setting into a separate
function. Only FTP bothers with that.
Closes#18203
The `connectdata` members `sockfd` and `writesockfd` needed to by either
CURL_SOCKET_BAD or a copy of one of `conn->sock[2]`. When equal to one,
that index was used to send/recv/poll the proper socket or connection
filter chain.
Replace those with `send_idx` and `recv_idx` which are either -1, 0 or 1
to indicate which socket/filter to send/receive on.
Closes#18179
When a HTTP version has been negotiated via ALPN, set the member
`conn->httpversion_seen` accordingly. This allows pending transfers to
reuse multiplexed http connections before the response to the first
transfer has arrived.
Fixes#18177
Reported-by: IoannisGS on github
Closes#18181
- Consistently keep options within ranges
- Reduce the maximum maxredirs value to fit a signed short
- Removed comments as the place to document the options is not here
Closes#18174
Hold them for half the normal lifetime. Helps when told to transfer N
URLs in quick succession that all use the same non-resolving hostname.
Done by storing a DNS entry with a NULL pointer for 'addr'.
Previously an attempt was made in #12406 by Björn Stenberg that was
ultimately never merged.
Closes#18157
In WebAssembly, using `TCP_NODELAY` fails with:
```
* Could not set TCP_NODELAY: Protocol not available
```
Add a new feature macro in `curl_setup.h` telling whether `TCP_NODELAY`
is known to be supported at runtime, when defined at compile-time.
Keep `TCP_NODELAY` guards at their current positions to ensure the
necessary headers (e.g. `netinet/tcp.h` and `netinet/in.h`) define it.
Reported-by: Jeroen Ooms
Fixes#17974Closes#18155
Adds `curl_off_t curl_multi_get_offt(CURLM *multi_handle, CURLMinfo_offt
info)` to the multi interface with enums:
* CURLMINFO_XFERS_CURRENT: current number of transfers
* CURLMINFO_XFERS_RUNNING: number of running transfers
* CURLMINFO_XFERS_PENDING: number of pending transfers
* CURLMINFO_XFERS_DONE: number of finished transfers to read
* CURLMINFO_XFERS_ADDED: total number of transfers added, ever
Add documentation for functions and info enums.
Add use in the curl command line tool to replace two static
variables counting the same "from the outside".
refs #17870Closes#17992
`getsock()` calls operated on a global limit that could
not be configure beyond 16 sockets. This is no longer adequate
with the new happy eyeballing strategy.
Instead, do the following:
- make `struct easy_pollset` dynamic. Starting with
a minimal room for two sockets, the very common case,
allow it to grow on demand.
- replace all protocol handler getsock() calls with pollsets
and a CURLcode to return failures
- add CURLcode return for all connection filter `adjust_pollset()`
callbacks, since they too can now fail.
- use appropriately in multi.c and multi_ev.c
- fix unit2600 to trigger pollset growth
Closes#18164
Instead of using integer seconds. Also: if the cache contains over
30,000 entries after first pruning, it makes anoter round and removes
all entries that are older than half the age of the oldest entry until
it goes below 30,000.
Closes#18160
- explains its purpose better
- make it global static const
- added an assert for a condition that should never happen (that we
also catch run-time)
Closes#18152
Setting the path component to contain the letters:
! $ & ' ( ) { } [ ] * + , ; = : @
now leaves them un-encoded when CURLU_URLENCODE is used.
Amended test 1560 to verify.
Reported-by: Jeroen Ooms
Fixes#17977Closes#18024
This patch bumps the size of these macros from `int` to `long`, while
keeping their actual values the same. It may cause incompatibilities in
user code, requiring the bump of holder variables and/or adding casts:
- CURLPROTO_HTTP
- CURLPROTO_HTTPS
- CURLPROTO_FTP
- CURLPROTO_FTPS
- CURLPROTO_SCP
- CURLPROTO_SFTP
- CURLPROTO_TELNET
- CURLPROTO_LDAP
- CURLPROTO_LDAPS
- CURLPROTO_DICT
- CURLPROTO_FILE
- CURLPROTO_TFTP
- CURLPROTO_IMAP
- CURLPROTO_IMAPS
- CURLPROTO_POP3
- CURLPROTO_POP3S
- CURLPROTO_SMTP
- CURLPROTO_SMTPS
- CURLPROTO_RTSP
- CURLPROTO_RTMP
- CURLPROTO_RTMPT
- CURLPROTO_RTMPE
- CURLPROTO_RTMPTE
- CURLPROTO_RTMPS
- CURLPROTO_RTMPTS
- CURLPROTO_GOPHER
- CURLPROTO_SMB
- CURLPROTO_SMBS
- CURLPROTO_MQTT
- CURLPROTO_GOPHERS
- CURLPROTO_ALL
Also:
- keep existing cast within the documentation to make sure it applies
to older curl versions as well.
Closes#18136
When an SSL_write() blocks we need to retry it with the
same length as before or stupid OpenSSL freaks out. Remember
it, limit any longer sends and fail shorter ones.
Fixes#18121
Reported-by: adamse on github
Closes#18132
test_02_36 tests h1/h2/h3 with urls longer than 1/16/32/64K.
Protocols behave the same until the size exceed 64k when h2 frame limits
bite and h3 exhibits a different http status.
Failed attempt to reproduce #18121Closes#18129
Add tests of CURLINFO_TLS_SSL_PTR and its returned value in test client
'hx-download'. Use obtained pointer to look up the negotiated TLS
version.
Update manpage of CURLINFO_TLS_SSL_PTR to also describe the behaviour of
wolfSSL similar to OpenSSL. Fix the wolfSSl implementation for TCP to
behave like that. Update the QUIC queries.
Fix rustls `get_internals()` to return the rustls_connection* and not
the address of the pointer.
Assisted-by: Viktor Szakats
Closes#18066
When `CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS` expires, start the next ip
connect attempt, but keep all ongoing attempts alive.
Separate happy-eyeballs connection filter into own source files.
Closes#18105
Schannel is not supported by UWP. SSPI is also required by Schannel in
curl, and SSPI also isn't supported by UWP.
mingw-w64 is able to create such build regardless (my guess: due to API
parts not accurately marked as UWP-only), but the binary is unlikely
to work. With MSVC the failure happens at build-time.
Ref: https://learn.microsoft.com/windows/win32/api/sspi/nf-sspi-initsecurityinterfacea#requirements
Ref: https://learn.microsoft.com/windows/win32/secauthn/initializesecuritycontext--schannel#requirements
Drop all UWP-related logic, including two related feature checks, that
can now be permanently enabled.
Also:
- build: show fatal error for Schannel in UWP mode.
- build: do not allow enabling SSPI in UWP mode.
- drop undocumented option `DISABLE_SCHANNEL_CLIENT_CERT`. Added without
mention in an unrelated commit. The PR text says to save size. On x64
this is 0.3%, or 4KB out of 1.3MB. The tiny gain doesn't justify
an extra build variant. Ref: 8beff43559
- move `MPROTO_SCHANNEL_CERT_SHARE_KEY` closer to its use.
- replace commented block with `#if 0`.
Reviewed-by: Jay Satiro
Follow-up to cd0ec4784c#17089Closes#18116
Always available in supported mingw-w64 and MSVC compilers, except
in UWP mode. For mingw32ce this macro is defined later in the code.
Also available in OpenWatcom 2.
ce6c37eb29/bld/w32api/include/winerror.mhCloses#18108
They are defined by all mingw-w64 versions and all supported MSVC
versions (VS2008 and up).
Also by OpenWatcom 2:
ce6c37eb29/bld/w32api/include/winerror.mh
mingw32ce misses `CRYPT_E_NOT_IN_REVOCATION_DATABASE`.
Closes#18092
They are defined by all mingw-w64 versions and all supported MSVC
versions (SDK 7.1A+).
Also by OpenWatcom 2:
ce6c37eb29/bld/w32api/include/wincrypt.mh
These aren't defined by mingw32ce. And likely defined by MS WinCE SDK,
but curl code doesn't use them in WinCE builds.
Closes#18093
In case they are used again in the future, the fallbacks are not
necessary for the supported mingw-w64 (v3+) and MSVC versions.
Follow-up to 6238888ca7#15621Closes#18091
Since the content varies during connection setup and while doing it
(eyeballing), remove these strcut from `connectdata` and replace use
with querying the connection filters. Those keep that information
already.
Change the info logging of established connections to also give the
local address and port.
Closes#17960
- add a message if a boolean is set to something not 1 or 0 (as it might be
made to mean something else in a future)
- use 's->' in all setopt_* functions
Closes#17887
New multi option CURLMOPT_NETWORK_CHANGED with a long bitmask value:
- CURLM_NWCOPT_CLEAR_CONNS: do not reuse existing connections, close all
idle connections.
- CURLM_NWCOPT_CLEAR_DNS: clear the multi's DNS cache.
All other bits reserved for future extensions.
Fixes#17225
Reported-by: ウさん
Closes#17613
Early mingw-w64 releases missed it, but by requiring v3.0, this is no
longer an issue. Supported Visual Studio SDKs also offer it.
Follow-up to a28f5f68b9#18010Closes#18057
