To allow building test binaries without test certs, replacing
`_CURL_SKIP_BUILD_CERTS` internal option with a build target that is
similar to `testdeps`, but without building the test certificates.
To make building test binaries a little bit faster, with less noisy
output, and without having to reconfigure the build.
Closes#20708
Tests are build in "unity"-style, by including sources into an umbrella
C files (similar to how CMake unity works). This does not play well with
clang-tidy, which seems to unconditionally ignore C sources included
like this. To fix it, curl's CMake implements a manual clang-tidy
support for tests, which compiles sources one-by-one, while also making
sure sources compile cleanly standalone (e.g. all sources need to
include `first.h`). The manual clang-tidy implementation is fragile, and
performance, in particular when targeting Windows, is abysmal.
This patch introduces an alternate solution, enabled by the
`_CURL_TESTS_CONCAT=ON` option. In this mode, umbrella sources include
the actual sources instead of `#including` them. Allowing to use CMake's
built-in clang-tidy support to compile them, with clang-tidy actually
checking the sources. Making the manual clang-tidy support unnecessary.
In the Windows CI job it results in a 4x performance improvement (4m ->
1m), making it practical to run clang-tidy on tests on Windows, in CI.
The main downside is that clang-tidy doesn't understand the `#line`
directive. Meaning issues found show the wrong filename and line number
next to them. It's not impossible to locate errors this way, but also
not convenient.
Minor/potential downside is that the concatenated source needs to be
reassembled each time an original source is updated. This may result in
more copying on the disk when used in local development. The largest
source is 1.4MB, so probably not a show-stopper on most machines.
Another is the complexity of maintaining two methods in parallel, which
may be necessary till clang-tidy understands `#line`:
https://github.com/llvm/llvm-project/issues/62405
This solution may in theory also enable adding clang-tidy support for
tests in autotools, though I haven't tried.
Targeted for curl CI for now, and used in a GHA/windows job. 100%
experimental, not recommended outside these.
Closes#20667
- vms/curlmsg_vms.h: delete unused/commented code.
- vtls/schannel_verify: sort includes.
- typecheck-gcc.h: fix indent and alignment.
- lib/config-win32.h: drop idle `#undef`.
- spacecheck: check for stray empty lines before after curly braces.
- make literals more readable: 1048576 -> 1024 * 1024
- scope variables.
- use ISO date in a comment.
- drop redundant parentheses.
- drop empty comments.
- unfold lines.
- duplicate/stray spaces in comments.
- fix indent, whitespace, minor typos.
Closes#20690
For consistency.
Also:
- one remaining in `src/tool_writeout.c`.
- replace casting an `int` to `CURLcode`.
- lib758: rename `CURLMcode` `result` to `mresult`.
- move literals to the right side of if expressions.
Follow-up to d0dc6e2ec0#20426
Follow-up to 56f600ec23Closes#20432
And a few variables around.
There remain cases where the accepted pointer is const, yet the returned
pointer is written to.
Partly addressing (glibc 2.43):
```
* For ISO C23, the functions bsearch, memchr, strchr, strpbrk, strrchr,
strstr, wcschr, wcspbrk, wcsrchr, wcsstr and wmemchr that return
pointers into their input arrays now have definitions as macros that
return a pointer to a const-qualified type when the input argument is
a pointer to a const-qualified type.
```
Ref: https://lists.gnu.org/archive/html/info-gnu/2026-01/msg00005.html
Reported-by: Rudi Heitbaum
Ref: #20420Closes#20421
When the compiler supports C99.
- map logging functions to macro stubs when verbose logging is disabled
and the compiler is C99. Make sure these stubs silence unused variable
warnings for non-variadic arguments.
Before this patch they mapped to function stubs, the same codepath
used for C89 compiler in this configuration.
- introduce new macros to tell the compiler which code to include
when verbose code is active, or inactive:
- `CURLVERBOSE`: defined when verbose code is active.
To enclose blocks of code only used for verbose logging.
- `VERBOSE(statement);`:
compile statement when verbose code is active.
To mark code lines only used for verbose logging.
- `NOVERBOSE(statement);`:
compile statement when verbose code is inactive.
To suppress warnings for arguments passed to logging functions via
printf masks, e.g. `NOVERBOSE((void)ipaddress);`, yet keeping
the warning in verbose builds.
Note these macros are not the same as `CURL_DISABLE_VERBOSE_STRINGS`.
Verbose code is always active in C89 mode (without variadic macro
support).
- drop existing uses of `CURL_DISABLE_VERBOSE_STRINGS` where redundant,
or replace with the above macros. Ending up reducing the number of
`#ifdef`s, and also the number of lines.
Assisted-by: Daniel Stenberg
Assisted-by: Jay Satiro
Reported-by: Dan Fandrich
Fixes#20341
Refs: #12105#12167Closes#20353
When checking a transfer for being expired via `Curl_timeleft_ms()`,
eleminate the `bool connecting` parameter and have the function check
the `mstate` of the transfer instead.
Advantages:
* eleminate the caller needing awareness if the transfer is
connecting or in a later state
* fix pingpong timeout handling to check the correct timeout
during "proto_connect" phases
* avoid using "connecting" timeouts during establishing a secondary
connection (e.g. FTP) since this would use the timestamp from
the original, primary connect and thus be wrong
Reported-by: Wyuer on github
Fixes#20347Closes#20354
Drop separate `TrackMemory` (aka `CURLDEBUG`) debug feature.
After recent changes (thread-safety,
193cb00ce9, and updates leading up to
it), `TrackMemory` is unlikely to cause build or runtime issues.
To simplify builds and debug options, enable `TrackMemory`
unconditionally for debug-enabled (aka `DEBUGBUILD`) builds. Before
this patch, this was already the default, with an option to disable
it, or enable it in non-debug-enabled builds.
Note, in practice these two debug options already went hand in hand. It
was not possible to toggle them separately for a long time due to bugs,
before 59dc9f7e69 (2024-05-28) fixed it.
This patch also removes/deprecates separate knobs and feature flags for
`TrackMemory`:
- autotools: `--enable-curldebug`/`--disable-curldebug`
- cmake: `-DENABLE_CURLDEBUG=ON`/`OFF`
- C macro: `CURLDEBUG`
- libcurl: `CURL_VERSION_CURLDEBUG` symbol deprecated in favor
of `CURL_VERSION_DEBUG`. They always return the same value after this
patch.
Also:
- drop `TrackMemory` from `curl -V` output.
- rename internal `CURLDEBUG` macro to `CURL_MEMDEBUG` internally.
To avoid confusion with `DEBUGBUILD`, but to keep guarding
`TrackMemory`-related internals for readability.
- runtests: bind `TrackMemory` to debug feature. Keep it a separate
test feature requirement, for clarity.
- CI: drop test builds for combinations of the two options.
- GHA/linux: no longer disable TrackMemory in the TSAN job.
Ref: https://github.com/curl/curl/pull/20328#issuecomment-3754528407Closes#20331
When a download size is known and rate limiting is in effect, adjust the
duration of each measurement step and its rate for maximum precision.
Since it is unpredictable how long the last bytes of a download will
take, download speed can be thrown off if the "last bytes" are a
significant amount of the total download. Make the "last bytes" small in
comparision to the rest and "stretch" the rate limit intervals to
accommodate the difference.
Fix ngtcp2 receive data acknowldgements to be based on a local window
size tracking. This allows window updates controlled by rate limits.
Fix ratelimit wait time calculation to accomodate negative tokens.
h3 rate limit, update timeers
Make download rate limits work correctly in ngtcp2. Fix multi handling
of rate limits to set a timer for when limits will update again.
Without running the transfer on limit updates, protocols like h2/h3 may
stall if the server does not send due to stream windows being too small.
scorecard: measure download speedlimits
When running scorecard with --limit-rate=n, show the reported download
speed averages plus percentage deviation from the limit.
Closes#20228
This makes the easy handle 432 bytes smaller (totally 5352 bytes on my
rather maximized Linux 64 bit build). The 440 byte mimepost struct is
now allocated only when needed.
Closes#20260
Avoid using PRIu32 and PRId32 in product source code. We don't need it.
It reduces readability. It is also inconsistent since unsigned int has
the same size and does not require the define.
DJGPP warns about using %u for uint32_t by default because it seems to
typedef it to unsigned long instead of unsigned int. Which even that is
annoying since long and int are both 32 bit on this platform.
We use our own *printf() implementation and we know this is safe.
This work-around defines uint32_t for DJGPP into unsigned int to avoid
the warnings and thus the need to use PRIu32 and PRId32.
Closes#20215
- Each time field is now 7 characters wide, so that the total width
never exceeds 79 columns so that it works correctly also in Windows
terminals. The title lines are adjusted accordingly.
This is accomplished by using h:mm:ss style up to 10 hours, and for
longer periods switch to "nnX nnY" style output. For hours, days,
months and years.
For less than one hour, the hour field is now dropped.
When no time info is provided, the field is now space-only. No more
`-:--:--`.
Also fixed the output for really long times which previously was
completely broken. The largest time now shows as ">99999y". (Becase
I can't figure out a better way).
- For sizes, the widths are now properly fixed to 6 characters. When
displaying a unit with less than 3 digits, it shows two decimal
precision like "16777215 => 15.99M" and one decmal otherwise: "262143
=> 255.9k"
Also fixes the decimal math. 131071 is 127.9k, which it previously did
not show.
- The time and size field outputs are now properly verified in test
1636.
Fixes#20122Closes#20173
fixup use only space when no time exists
Drop the hour from the display when zero
The 'ma' and 'persist' keywords should be considered per list entry, not
once per header.
Expand test 1654 to verify such headers
Reported-by: Hunt Darlener
Closes#20160
- asyn-thrdd.c: scope an include.
- apply more clang-format suggestions.
- tidy-up PP guard comments.
- delete empty line from the top of headers.
- add empty line after `curl_setup.h` include where missing.
- fix indent.
- CODE_STYLE.md: add `strcpy`.
Follow-up to 8636ad55df#20088
- lib1901.c: drop unnecessary line.
Follow-up to 436e67f65b#20076Closes#20070
- drop unused `http.h` includes.
- drop unused `http1.h` include.
- drop unused `http2.h` includes.
- vssh/ssh.h: drop unused `vssh.h` include.
- urldata.h: drop unused protocol includes.
- url: include `smtp.h` directly.
- rtsp.h: include directly where used.
- imap, smtp: drop redundant include, move another from .h to .c.
Verified with an all non-unity CI run.
Closes#20093
Also:
- examples/hsts-preload: apply the same change as it's based on lib1915
in tests. Make a local clone of `curlx_strcopy()`. Then drop the
`_CRT_SECURE_NO_WARNINGS` hack, that's no longer necessary.
- curl_setup.h: delete `strcpy()` from the `_CRT_SECURE_NO_WARNINGS`
list.
Closes#20076
Update test 1941 to verify this
Remove unused code from dynhds for handling folded headers, and the
associated unit tests of those functions in test 2602 and 2603.
Closes#20080
- replace `sendf.h` with `curl_trc.h` where it was included just for it.
- drop unused `curl_trc.h` includes.
- easy: delete obsolete comment about `send.h` include reason.
Also:
- move out `curl_trc.h` include from `sendf.h` and include it directly
in users, where not done already. To flatten the include tree and
to less rely on indirect includes.
- stop including `sendf.h` from other headers, replace it with forward
declaration of `Curl_easy`, as done already elsewhere.
Verified with an all non-unity CI run.
Closes#20061
Always use curlx_now() when calling Curl_pgrs_now(data). Tests with the
"manual" updates to now proved differ more then 100ms in parallel testing.
Add `curlx_nowp()` to set current time into a struct curltime.
Add `curlx_ptimediff_ms() and friends, passing pointers.
Update documentation.
Closes#19998
- apply more clang-format.
- lib/version: use `CURL_ARRAYSIZE()`.
- INSTALL-CMAKE.md: sync-up an option description with others.
- examples: delete unused main args.
- examples/ftpgetinfo: document `_CRT_SECURE_NO_WARNINGS` symbol.
- delete remaining stray duplicate lines.
- acinclude.m4: drop an unnecessary x-hack.
- vtls/mbedtls: join a URL split into two lines.
- src/tool_cb_see: add parentheses around macro expressions.
- src/tool_operate: move literals to the right side of comparisons.
- libtests: sync up fopen/fstat error messages between tests.
- curl_setup.h: replace `if ! defined __LP64` with `ifndef __LP64`.
I assume it makes no difference on Tandem systems, as the latter form
is already used in `include/curl/system.h`.
Closes#20018
Use `data->progress.now` as the timestamp of proecssing a transfer.
Update it on significant events and refrain from calling `curlx_now()`
in many places.
The problem this addresses is
a) calling curlx_now() has costs, depending on platform. Calling it
every time results in 25% increase `./runtest` duration on macOS.
b) we used to pass a `struct curltime *` around to save on calls, but
when some method directly use `curx_now()` and some use the passed
pointer, the transfer experienes non-linear time. This results in
timeline checks to report events in the wrong order.
By keeping a timestamp in the easy handle and updating it there, no
longer invoking `curlx_now()` in the "lower" methods, the transfer
can observer a steady clock progression.
Add documentation in docs/internals/TIME-KEEPING.md
Reported-by: Viktor Szakats
Fixes#19935Closes#19961
- drop stray duplicate empty lines in docs, scripts, test data, include,
examples, tests.
- drop duplicate PP parenthesis.
- curl-functions.m4: move literals to the right side in if expressions,
to match rest of the source code.
- FAQ.md: delete language designator from an URL.
- packages: apply clang-format (OS400, VMS).
- scripts/schemetable.c: apply clang-format.
- data320: delete duplicate empty line that doesn't change the outcome.
- spacecheck: extend to check for duplicate empty lines
(with exceptions.)
- fix whitespace nits
Closes#19936
To make it clearer to readers of the code that the resulting dup also
has a null terminator. Something a "normal" memdup() does not provide.
Closes#19833
