RFC 3617 defines two specific modes, "netascii" and "octet". This code
now checks only for those trailing ones - and not in the hostname since
they can't be there anymore.
Assisted-by: Jay Satiro
Closes#19070
After this patch, the codebase no longer overrides system printf
functions. Instead it explicitly calls either the curl printf functions
`curl_m*printf()` or the system ones using their original names.
Also:
- drop unused `curl_printf.h` includes.
- checksrc: ban system printf functions, allow where necessary.
Follow-up to db98daab05#18844
Follow-up to 4deea9396b#18814Closes#18866
Also:
- tests/server: replace local `sstrerror()` with `curlx_strerror()`.
- tests/server: show the error code next to the string, where missing.
- curlx: use `curl_msnprintf()` when building for src and tests.
(units was already using it.)
- lib: drop unused includes found along the way.
- curlx_strerror(): avoid compiler warning (and another similar one):
```
In file included from servers.c:14:
../../lib/../../lib/curlx/strerr.c: In function ‘curlx_strerror’:
../../lib/../../lib/curlx/strerr.c:328:32: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
328 | SNPRINTF(buf, buflen, "%s", msg);
| ^
../../lib/../../lib/curlx/strerr.c:47:18: note: ‘snprintf’ output 1 or more bytes (assuming 2) into a destination of size 1
47 | #define SNPRINTF snprintf
| ^
../../lib/../../lib/curlx/strerr.c:328:7: note: in expansion of macro ‘SNPRINTF’
328 | SNPRINTF(buf, buflen, "%s", msg);
| ^~~~~~~~
```
Follow-up to 45438c8d6f#18823Closes#18840
Store the used remote address on the first receive call and then make
sure that it remains the same address on subsequent calls to reduce the
risk of tampering. Doesn't make the transfer secure because it is still
unauthenticated and clear text.
Reported in Joshua's sarif data
Closes#18658
When Curl_timeleft() < 0 we used to return 0, masking the expiry and
skipping the caller’s (timeout_ms < 0) path. Now we set FIN and return
the negative value so tftp_multi_statemach() aborts with
CURLE_OPERATION_TIMEDOUT as intended.
Closes#18574
`getsock()` calls operated on a global limit that could
not be configure beyond 16 sockets. This is no longer adequate
with the new happy eyeballing strategy.
Instead, do the following:
- make `struct easy_pollset` dynamic. Starting with
a minimal room for two sockets, the very common case,
allow it to grow on demand.
- replace all protocol handler getsock() calls with pollsets
and a CURLcode to return failures
- add CURLcode return for all connection filter `adjust_pollset()`
callbacks, since they too can now fail.
- use appropriately in multi.c and multi_ev.c
- fix unit2600 to trigger pollset growth
Closes#18164
The `transport` to use for a transfer, e.g. TCP/QUIC/UNIX/UDP, is
initially selected by options and protocol used. This is set at the
`struct connectdata` as `transport` member.
During connection establishment, this transport may change due to
Alt-Svc or Happy-Eyeballing. Most common is the switch from TCP to QUIC.
Rename the connection member to `transport_wanted` and add a way to
query the connection for the transport in use via a new connection
filter query.
The filter query can also be used in the happy eyeballing attempts when
code needs to know which transport is used by the "filter below". This
happens in wolfssl initialization, as one example.
Closes#17923
Used to be a pointer set (and cleared) by the socket connection filters
to a struct in their contexts. Instead, add a filter query method to
obtain the pointer when needed.
Closes#17385
Move curlx_ functions into its own subdir.
The idea is to use the curlx_ prefix proper on these functions, and use
these same function names both in tool, lib and test suite source code.
Stop the previous special #define setup for curlx_ names.
The printf defines are now done for the library alone. Tests no longer
use the printf defines. The tool code sets its own defines. The printf
functions are not curlx, they are publicly available.
The strcase defines are not curlx_ functions and should not be used by
tool or server code.
dynbuf, warnless, base64, strparse, timeval, timediff are now proper
curlx functions.
When libcurl is built statically, the functions from the library can be
used as-is. The key is then that the functions must work as-is, without
having to be recompiled for use in tool/tests. This avoids symbol
collisions - when libcurl is built statically, we use those functions
directly when building the tool/tests. When libcurl is shared, we
build/link them separately for the tool/tests.
Assisted-by: Jay Satiro
Closes#17253
The issues found fell into these categories, with the applied fixes:
- const was accidentally stripped.
Adjust code to not cast or cast with const.
- const/volatile missing from arguments, local variables.
Constify arguments or variables, adjust/delete casts. Small code
changes in a few places.
- const must be stripped because an API dependency requires it.
Strip `const` with `CURL_UNCONST()` macro to silence the warning out
of our control. These happen at API boundaries. Sometimes they depend
on dependency version, which this patch handles as necessary. Also
enable const support for the zlib API, using `ZLIB_CONST`. Supported
by zlib 1.2.5.2 and newer.
- const must be stripped because a curl API requires it.
Strip `const` with `CURL_UNCONST()` macro to silence the warning out
of our immediate control. For example we promise to send a non-const
argument to a callback, though the data is const internally.
- other cases where we may avoid const stripping by code changes.
Also silenced with `CURL_UNCONST()`.
- there are 3 places where `CURL_UNCONST()` is cast again to const.
To silence this type of warning:
```
lib/vquic/curl_osslq.c:1015:29: error: to be safe all intermediate
pointers in cast from 'unsigned char **' to 'const unsigned char **'
must be 'const' qualified [-Werror=cast-qual]
lib/cf-socket.c:734:32: error: to be safe all intermediate pointers in
cast from 'char **' to 'const char **' must be 'const' qualified
[-Werror=cast-qual]
```
There may be a better solution, but I couldn't find it.
These cases are handled in separate subcommits, but without further
markup.
If you see a `-Wcast-qual` warning in curl, we appreciate your report
about it.
Closes#16142
- add hex and octal parsers to the Curl_str_* family
- make curlx_strtoofft use these parsers
- remove all use of strtol() and strtoul() in library code
- generally use Curl_str_* more than strtoofft, for stricter parsing
- supports 64-bit universally, instead of 'long' which differs in size
between platforms
Extended the unit test 1664 to verify hex and octal parsing.
Closes#16336
Instead of strtoul() and strtol() calls.
Easier API with better integer overflow detection and built-in max check
that now comes automatic everywhere this is used.
Closes#16319
Adds a `follow()` callback to protocol handlers, so they may decide how
to act on a `newurl` after a request has been done. This is optional.
This moves the HTTP code for handling redirects from multi.c to http.c
where it should be. If we ever add a protocol with its own logic, it
would install its own follow function.
Closes#16075
`Makefile.mk` supported MS-DOS and Amiga, but `./configure` also
supported them in a better tested and more flexible way.
This patch also adds CMake support for MS-DOS/DJGPP and Amiga OS 3.
`Makefile.mk` was not maintained. Delete it in favour of first-tier
build methods.
Also include some non-MS-DOS/AmigaOS-specific tidy-up, see details at
the end of this message.
Details:
- fix/silence all MS-DOS/DJGPP build warnings and issues.
- add MS-DOS support to cmake.
- default to `ENABLE_THREADED_RESOLVER=OFF` for MS-DOS.
- add support for `WATT_ROOT`.
- use static libcurl with MS-DOS.
- fixup default CMake suffixes/prefixes for DJGPP.
- disable hidden symbols for MS-DOS. Not supported on MS-DOS.
- opt-in MS-DOS into `USE_UNIX_SOCKETS`.
- improve MS-DOS support in autotools.
- default to `--disable-threaded-resolver` for MS-DOS.
- make sure to use `close_s()` (from Watt-32) with autotools and cmake.
`Makefile.mk` used it before this patch.
- GHA: add DJGPP cmake (~30s) and autotools (~60s) build jobs.
Also build tests and examples with cmake.
- improve AmigaOS support in autotools:
- configure: detect `CloseSocket()` when it's a macro.
- configure: fix `IoctlSocket` detection on AmigaOS.
- curl-amissl.m4: pass AmiSSL libs to tests/servers.
- add AmigaOS3 support to cmake:
- cmake: fix `HAVE_IOCTLSOCKET_CAMEL` and
`HAVE_IOCTLSOCKET_CAMEL_FIONBIO` detections.
- set necessary system libs.
- add AmiSSL support.
- inet_ntop, inet_pton: fix using it for AmigaOS. cmake detects them,
and they did not compile with AmigaOS.
- cmake: better sync `gethostname` detection with autotools.
Fixes detection for AmigaOS, where `gethostname` is a macro.
- cmake: fix `sys/utime.h` detection on AmigaOS.
- cmake: force-disable `getaddrinfo` for AmigaOS.
- cmake: tweak threading and static/shared default for AmigaOS.
- cmake: rely on manual variable `AMIGA` to enable the platform.
- GHA: add AmigaOS cmake and autotools (~45s) jobs.
Also build tests and examples with cmake.
- INSTALL: update MS-DOS and AmigaOS build instructions.
- amigaos: fix `-Wpointer-sign` and
`zero or negative size array '_args'` in `Printf()`.
- amigaos: fix `-Wpointer-sign`
- amigaos: fix `-Wredundant-decls` `errno` and `h_errno`.
- amigaos: brute-force silence `lseek()` size warnings.
- amigaos: server/resolve: silence `-Wdiscarded-qualifiers`.
- amigaos: server/resolve: fix `-Wpointer-sign`.
- amigaos: fix `CURL_SA_FAMILY_T` type.
- nonblock: prefer `HAVE_IOCTLSOCKET_CAMEL_FIONBIO` for AmigaOS.
`ioctl` is also detected, but fails when used. Make the above override
it for a successful build.
Authored-by: Darren Banfi
Fixes#15537Closes#15603
- tftpd: prefer `HAVE_IOCTLSOCKET_CAMEL_FIONBIO` for AmigaOS.
- tftpd: tidy-up conditional code.
- curl: set stack size to 16384 for AmigaOS3/4
Overriding the default 4096.
Suggested-by: Darren Banfi
Ref: https://github.com/curl/curl/pull/15543#issuecomment-2498783123
Ref: https://wiki.amigaos.net/wiki/Controlling_Application_Stack
- functypes.h: fix `SEND_QUAL_ARG2` for AmigaOS.
- tftp: add missing cast in sendto() call for AmigaOS.
- getinfo: fix warning with AmigaOS.
- tool_operate: silence warning with AmigaOS
- amigaos: fix building libtests due to missing `RLIMIT_NOFILE`.
- curl_gethostname: silence warning for AmigaOS.
- ftp: silence `-Wtype-limits` for AmigaOS.
- libtest: fix timeval initialization for AmigaOS.
- examples: fix `timeval` initialization for AmigaOS.
- examples: silence warning for AmigaOS.
- configure: fix IPv6 detection for cross-builds.
- netrc: fix to build with AmigaOS cleanly.
- buildinfo: detect and add `DOS` tag for MS-DOS builds.
- buildinfo: add `AMIGA` to buildinfo.txt in auttools.
- build: move `USE_WATT32` macro definition to cmake/configure.
Non-MS-DOS/AmigeOS-specific tidy-ups:
- configure: sync `sa_family_t` detection with cmake.
- configure: sync `ADDRESS_FAMILY` detection signals with cmake.
- doh: use `CURL_SA_FAMILY_T`.
- lib: drop mingw-specific `CURL_SA_FAMILY_T` workaround.
- cmake: extend instead of override check-specific
configurations/requirements.
This allows to honor global requirements added earlier.
Necessary for AmigaOS for example.
- cmake: omit warning on disabled IPv6 for MS-DOS and AmigaOS.
No IPv6 support on these platforms. Also sync with autotools.
- lib1960: use libcurl `inet_pton()` wrapper.
- cmake: detect LibreSSL (to match autotools).
- cmake: say the specific OpenSSL flavour detected.
- hostip: add missing `HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID` guard.
- lib: simplify classic mac feature guards.
Follow-up to a8861b6ccd#9764Closes#15543
- fix MSH3 static symbol clash.
- fix Quiche static symbol clash.
- fix local macro clash with BearSSL header.
- fix local macro clash with OmniOS system header.
```
In file included from ../../lib/urldata.h:197,
from ../../lib/altsvc.c:32,
from libcurlall.c:2:
../../lib/cf-socket.h:55:25: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
55 | #define sa_addr _sa_ex_u.addr
| ^
In file included from ../../lib/urldata.h:197,
from ../../lib/altsvc.c:32,
from libcurlall.c:2:
../../lib/cf-socket.h:55:25: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
55 | #define sa_addr _sa_ex_u.addr
| ^
```
Ref: https://github.com/curl/curl/actions/runs/10738314933/job/29781644299?pr=14772#step:3:6115
Discovered while adding support for "unity" builds for autotools.
Required-by: #14922
Cherry-picked from #14815Closes#14932
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
- clarify Curl_xfer_setup() with RECV/SEND flags and different calls for
which socket they operate on. Add a shutdown flag for secondary
sockets
- change Curl_xfer_setup() calls to new functions
- implement non-blocking connection shutdown at the end of receiving or
sending a transfer
Closes#13913
Seen when setting `ENABLE_DEBUG=ON` and `-DDEBUGBUILD` for mingw-w64
gcc 13.2.0 CMake unity builds in 'Release' configurations.
```
curl/lib/curl_gethostname.c:71:5: error: 'strncpy' specified bound 1025 equals destination size [-Werror=stringop-truncation]
71 | strncpy(name, force_hostname, namelen);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from curl/_bld/lib/CMakeFiles/libcurl_object.dir/Unity/unity_0_c.c:175:
In function 'hostcache_timestamp_remove',
inlined from 'Curl_hash_clean_with_criterium' at curl/lib/hash.c:265:19,
inlined from 'Curl_hash_clean_with_criterium' at curl/lib/hash.c:247:1,
inlined from 'hostcache_prune' at curl/lib/hostip.c:228:3,
inlined from 'Curl_hostcache_prune' at curl/lib/hostip.c:256:21:
curl/lib/hostip.c:205:12: error: 'now' may be used uninitialized [-Werror=maybe-uninitialized]
205 | time_t age = prune->now - c->timestamp;
| ^~~
curl/lib/hostip.c: In function 'Curl_hostcache_prune':
curl/lib/hostip.c:241:10: note: 'now' was declared here
241 | time_t now;
| ^~~
In function 'hostcache_timestamp_remove',
inlined from 'fetch_addr' at curl/lib/hostip.c:310:8:
curl/lib/hostip.c:205:23: error: 'user.now' may be used uninitialized [-Werror=maybe-uninitialized]
205 | time_t age = prune->now - c->timestamp;
| ~~~~~^~~~~
curl/lib/hostip.c: In function 'fetch_addr':
curl/lib/hostip.c:304:33: note: 'user' declared here
304 | struct hostcache_prune_data user;
| ^~~~
In file included from curl/_bld/lib/CMakeFiles/libcurl_object.dir/Unity/unity_0_c.c:40:
curl/lib/cf-socket.c: In function 'cf_socket_send':
curl/lib/cf-socket.c:1294:10: error: 'c' may be used uninitialized [-Werror=maybe-uninitialized]
1294 | if(c >= ((100-ctx->wblock_percent)*256/100)) {
| ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
curl/lib/cf-socket.c:1292:19: note: 'c' was declared here
1292 | unsigned char c;
| ^
In file included from curl/_bld/lib/CMakeFiles/libcurl_object.dir/Unity/unity_0_c.c:364:
In function 'tftp_state_timeout',
inlined from 'tftp_multi_statemach' at curl/lib/tftp.c:1230:27:
curl/lib/tftp.c:1208:5: error: 'current' may be used uninitialized [-Werror=maybe-uninitialized]
1208 | if(current > state->rx_time + state->retry_time) {
| ^
curl/lib/tftp.c: In function 'tftp_multi_statemach':
curl/lib/tftp.c:1192:10: note: 'current' was declared here
1192 | time_t current;
| ^~~~~~~
```
Ref: https://ci.appveyor.com/project/curlorg/curl/builds/49792835/job/91c8dj5qb36spfe0#L112
Ref: https://github.com/curl/curl/actions/runs/9082968838/job/24960616145#step:12:62
Ref: #13592Closes#13643
- Move all the "upload_done" handling to request.c
- add possibility to abort sending of a request
- add `Curl_req_done_sending()` for checks
- transfer.c: readwrite_upload() now clean
- removing data->state.ulbuf and data->req.upload_fromhere
- as well as data->req.upload_present
- set data->req.upload_done on having read all from
the client and completely flushed the send buffer
- tftp, remove setting of data->req.upload_fromhere
- serves no purpose as `upload_present` is not set
and the data itself is directly `sendto()` anyway
- smtp, make upload EOB conversion a client reader
- xfer_ulbuf addition
- add xfer_ulbuf for borrowing, similar to xfer_buf
- use in file upload
- use in c-hyper body sending
- h1-proxy, remove init of data->state.uilbuf that is never used
- smb, add own send_buf instead of using data->state.ulbuf
Closes#13010
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk (to be made
into a sperate PR, also)
Added as documented [in
CLIENT-READER.md](5b1f31dfba/docs/CLIENT-READERS.md).
- old `Curl_buffer_send()` completely replaced by new `Curl_req_send()`
- old `Curl_fillreadbuffer()` replaced with `Curl_client_read()`
- HTTP chunked uploads are now formatted in a client reader added when
needed.
- FTP line-end conversions are done in a client reader added when
needed.
- when sending requests headers, remaining buffer space is filled with
body data for sending in "one go". This is independent of the request
body size. Resolves#12938 as now small and large requests have the
same code path.
Changes done to test cases:
- test513: now fails before sending request headers as this initial
"client read" triggers the setup fault. Behaves now the same as in
hyper build
- test547, test555, test1620: fix the length check in the lib code to
only fail for reads *smaller* than expected. This was a bug in the
test code that never triggered in the old implementation.
Closes#12969
Curl_read/Curl_write clarifications
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer setup of
`conn->sockfd` and `conn->writesockfd` on which connection filter
chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index as
parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming
consistency
- clarify that the special CURLE_AGAIN handling to return `CURLE_OK`
with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is
returned by all other send() variants.
SingleRequest reshuffling
- move functions into request.[ch]
- differentiate between reset and free
- add Curl_req_done() to perform last actions
- add a send `bufq` to SingleRequest for future use in keeping upload data
Closes#12963
This clarifies the handling of server responses by folding the code for
the complicated protocols into their protocol handlers. This concerns
mainly HTTP and its bastard sibling RTSP.
The terms "read" and "write" are often used without clear context if
they refer to the connect or the client/application side of a
transfer. This PR uses "read/write" for operations on the client side
and "send/receive" for the connection, e.g. server side. If this is
considered useful, we can revisit renaming of further methods in another
PR.
Curl's protocol handler `readwrite()` method been changed:
```diff
- CURLcode (*readwrite)(struct Curl_easy *data, struct connectdata *conn,
- const char *buf, size_t blen,
- size_t *pconsumed, bool *readmore);
+ CURLcode (*write_resp)(struct Curl_easy *data, const char *buf, size_t blen,
+ bool is_eos, bool *done);
```
The name was changed to clarify that this writes reponse data to the
client side. The parameter changes are:
* `conn` removed as it always operates on `data->conn`
* `pconsumed` removed as the method needs to handle all data on success
* `readmore` removed as no longer necessary
* `is_eos` as indicator that this is the last call for the transfer
response (end-of-stream).
* `done` TRUE on return iff the transfer response is to be treated as
finished
This change affects many files only because of updated comments in
handlers that provide no implementation. The real change is that the
HTTP protocol handlers now provide an implementation.
The HTTP protocol handlers `write_resp()` implementation will get passed
**all** raw data of a server response for the transfer. The HTTP/1.x
formatted status and headers, as well as the undecoded response
body. `Curl_http_write_resp_hds()` is used internally to parse the
response headers and pass them on. This method is public as the RTSP
protocol handler also uses it.
HTTP/1.1 "chunked" transport encoding is now part of the general
*content encoding* writer stack, just like other encodings. A new flag
`CLIENTWRITE_EOS` was added for the last client write. This allows
writers to verify that they are in a valid end state. The chunked
decoder will check if it indeed has seen the last chunk.
The general response handling in `transfer.c:466` happens in function
`readwrite_data()`. This mainly operates now like:
```
static CURLcode readwrite_data(data, ...)
{
do {
Curl_xfer_recv_resp(data, buf)
...
Curl_xfer_write_resp(data, buf)
...
} while(interested);
...
}
```
All the response data handling is implemented in
`Curl_xfer_write_resp()`. It calls the protocol handler's `write_resp()`
implementation if available, or does the default behaviour.
All raw response data needs to pass through this function. Which also
means that anyone in possession of such data may call
`Curl_xfer_write_resp()`.
Closes#12480
This PR has these changes:
Renaming of unencode_* to cwriter, e.g. client writers
- documentation of sendf.h functions
- move max decode stack checks back to content_encoding.c
- define writer phase which was used as order before
- introduce phases for monitoring inbetween decode phases
- offering default implementations for init/write/close
Add type paramter to client writer's do_write()
- always pass all writes through the writer stack
- writers who only care about BODY data will pass other writes unchanged
add RAW and PROTOCOL client writers
- RAW used for Curl_debug() logging of CURLINFO_DATA_IN
- PROTOCOL used for updates to data->req.bytecount, max_filesize checks and
Curl_pgrsSetDownloadCounter()
- remove all updates of data->req.bytecount and calls to
Curl_pgrsSetDownloadCounter() and Curl_debug() from other code
- adjust test457 expected output to no longer see the excess write
Closes#12184
Previously it would only stop them from getting started if the size is
known to be too big then.
Update the libcurl and curl docs accordingly.
Fixes#11810
Reported-by: Elliot Killick
Assisted-by: Jay Satiro
Closes#11820
By making sure we set state.upload based on the set.method value and not
independently as set.upload, we reduce confusion and mixup risks, both
internally and externally.
Closes#11017
- copy `struct Curl_addrinfo` on filter setup into context
- remove `struct Curl_addrinfoi *` with `struct Curl_sockaddr_ex *` in
connectdata that is set and NULLed by the socket filter
- this means we have no reference to the resolver info in connectdata or
its filters
- trigger the CF_CTRL_CONN_INFO_UPDATE event when the complete filter
chain reaches connected status
- update easy handle connection information on CF_CTRL_DATA_SETUP event.
Closes#10213
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
