After this patch, the codebase no longer overrides system printf
functions. Instead it explicitly calls either the curl printf functions
`curl_m*printf()` or the system ones using their original names.
Also:
- drop unused `curl_printf.h` includes.
- checksrc: ban system printf functions, allow where necessary.
Follow-up to db98daab05#18844
Follow-up to 4deea9396b#18814Closes#18866
Before this patch `accept4()`, `socket()`, `socketpair()`, `send()` and
`recv()` system symbols were remapped via macros, using the same name,
to local curl debug wrappers. This patch replaces these overrides by
introducing curl-namespaced macros that map either to the system symbols
or to their curl debug wrappers in `CURLDEBUG` (TrackMemory) builds.
This follows a patch that implemented the same for `accept()`.
The old method required tricks to make these redefines work in unity
builds, and avoid them interfering with system headers. These tricks
did not work for system symbols implemented as macros.
The new method allows to setup these mappings once, without interfering
with system headers, upstream macros, or unity builds. It makes builds
more robust.
Also:
- checksrc: ban all mapped functions.
- docs/examples: tidy up checksrc rules.
Follow-up to 9863599d69#18502
Follow-up to 3bb5e58c10#17827Closes#18503
With a dash, using two Ls. Also for different forms of the word.
Use NULL in all uppercase if it means a zero pointer.
Follow-up to 307b7543eaCloses#17489
Move curlx_ functions into its own subdir.
The idea is to use the curlx_ prefix proper on these functions, and use
these same function names both in tool, lib and test suite source code.
Stop the previous special #define setup for curlx_ names.
The printf defines are now done for the library alone. Tests no longer
use the printf defines. The tool code sets its own defines. The printf
functions are not curlx, they are publicly available.
The strcase defines are not curlx_ functions and should not be used by
tool or server code.
dynbuf, warnless, base64, strparse, timeval, timediff are now proper
curlx functions.
When libcurl is built statically, the functions from the library can be
used as-is. The key is then that the functions must work as-is, without
having to be recompiled for use in tool/tests. This avoids symbol
collisions - when libcurl is built statically, we use those functions
directly when building the tool/tests. When libcurl is shared, we
build/link them separately for the tool/tests.
Assisted-by: Jay Satiro
Closes#17253
This uses c-ares under the hood and supports the CURL_DNS_SERVER
environment variable - for debug builds only. The getaddrinfo()
replacement function is only used if CURL_DNS_SERVER is set to make a
debug build work more like a release version without the variable set.
'override-dns' is a new feature for the test suite when curl can be told
to use a dedicated DNS server, and test 2102 is the first to require
this.
Requires c-ares 1.26.0 or later.
Closes#17134
Before this patch curl code was redefining `getaddrinfo` and
`freeaddrinfo` system symbols to plug in its debug wrappers. This was
causing pains to avoid applying the redefinitions to system headers
defining these functions, and to the local debug wrappers. Especially
in unity builds. It also required workarounds for systems where these
symbols are already macros.
Introduce curl-namespaced macros for these functions and use them.
This allows to drop all workarounds and makes it work in all envs,
local targets and unity/bundle combinations.
Also drop GHA/windows workaround and use the same unity batch across
all jobs. Follow-up to 29e4eda631#16272
Ref: #16272
Ref: 71cf0d1fca#14772
Ref: 3efba94f77#14765
Ref: f7d5f47059#14399Closes#16274
`Makefile.mk` supported MS-DOS and Amiga, but `./configure` also
supported them in a better tested and more flexible way.
This patch also adds CMake support for MS-DOS/DJGPP and Amiga OS 3.
`Makefile.mk` was not maintained. Delete it in favour of first-tier
build methods.
Also include some non-MS-DOS/AmigaOS-specific tidy-up, see details at
the end of this message.
Details:
- fix/silence all MS-DOS/DJGPP build warnings and issues.
- add MS-DOS support to cmake.
- default to `ENABLE_THREADED_RESOLVER=OFF` for MS-DOS.
- add support for `WATT_ROOT`.
- use static libcurl with MS-DOS.
- fixup default CMake suffixes/prefixes for DJGPP.
- disable hidden symbols for MS-DOS. Not supported on MS-DOS.
- opt-in MS-DOS into `USE_UNIX_SOCKETS`.
- improve MS-DOS support in autotools.
- default to `--disable-threaded-resolver` for MS-DOS.
- make sure to use `close_s()` (from Watt-32) with autotools and cmake.
`Makefile.mk` used it before this patch.
- GHA: add DJGPP cmake (~30s) and autotools (~60s) build jobs.
Also build tests and examples with cmake.
- improve AmigaOS support in autotools:
- configure: detect `CloseSocket()` when it's a macro.
- configure: fix `IoctlSocket` detection on AmigaOS.
- curl-amissl.m4: pass AmiSSL libs to tests/servers.
- add AmigaOS3 support to cmake:
- cmake: fix `HAVE_IOCTLSOCKET_CAMEL` and
`HAVE_IOCTLSOCKET_CAMEL_FIONBIO` detections.
- set necessary system libs.
- add AmiSSL support.
- inet_ntop, inet_pton: fix using it for AmigaOS. cmake detects them,
and they did not compile with AmigaOS.
- cmake: better sync `gethostname` detection with autotools.
Fixes detection for AmigaOS, where `gethostname` is a macro.
- cmake: fix `sys/utime.h` detection on AmigaOS.
- cmake: force-disable `getaddrinfo` for AmigaOS.
- cmake: tweak threading and static/shared default for AmigaOS.
- cmake: rely on manual variable `AMIGA` to enable the platform.
- GHA: add AmigaOS cmake and autotools (~45s) jobs.
Also build tests and examples with cmake.
- INSTALL: update MS-DOS and AmigaOS build instructions.
- amigaos: fix `-Wpointer-sign` and
`zero or negative size array '_args'` in `Printf()`.
- amigaos: fix `-Wpointer-sign`
- amigaos: fix `-Wredundant-decls` `errno` and `h_errno`.
- amigaos: brute-force silence `lseek()` size warnings.
- amigaos: server/resolve: silence `-Wdiscarded-qualifiers`.
- amigaos: server/resolve: fix `-Wpointer-sign`.
- amigaos: fix `CURL_SA_FAMILY_T` type.
- nonblock: prefer `HAVE_IOCTLSOCKET_CAMEL_FIONBIO` for AmigaOS.
`ioctl` is also detected, but fails when used. Make the above override
it for a successful build.
Authored-by: Darren Banfi
Fixes#15537Closes#15603
- tftpd: prefer `HAVE_IOCTLSOCKET_CAMEL_FIONBIO` for AmigaOS.
- tftpd: tidy-up conditional code.
- curl: set stack size to 16384 for AmigaOS3/4
Overriding the default 4096.
Suggested-by: Darren Banfi
Ref: https://github.com/curl/curl/pull/15543#issuecomment-2498783123
Ref: https://wiki.amigaos.net/wiki/Controlling_Application_Stack
- functypes.h: fix `SEND_QUAL_ARG2` for AmigaOS.
- tftp: add missing cast in sendto() call for AmigaOS.
- getinfo: fix warning with AmigaOS.
- tool_operate: silence warning with AmigaOS
- amigaos: fix building libtests due to missing `RLIMIT_NOFILE`.
- curl_gethostname: silence warning for AmigaOS.
- ftp: silence `-Wtype-limits` for AmigaOS.
- libtest: fix timeval initialization for AmigaOS.
- examples: fix `timeval` initialization for AmigaOS.
- examples: silence warning for AmigaOS.
- configure: fix IPv6 detection for cross-builds.
- netrc: fix to build with AmigaOS cleanly.
- buildinfo: detect and add `DOS` tag for MS-DOS builds.
- buildinfo: add `AMIGA` to buildinfo.txt in auttools.
- build: move `USE_WATT32` macro definition to cmake/configure.
Non-MS-DOS/AmigeOS-specific tidy-ups:
- configure: sync `sa_family_t` detection with cmake.
- configure: sync `ADDRESS_FAMILY` detection signals with cmake.
- doh: use `CURL_SA_FAMILY_T`.
- lib: drop mingw-specific `CURL_SA_FAMILY_T` workaround.
- cmake: extend instead of override check-specific
configurations/requirements.
This allows to honor global requirements added earlier.
Necessary for AmigaOS for example.
- cmake: omit warning on disabled IPv6 for MS-DOS and AmigaOS.
No IPv6 support on these platforms. Also sync with autotools.
- lib1960: use libcurl `inet_pton()` wrapper.
- cmake: detect LibreSSL (to match autotools).
- cmake: say the specific OpenSSL flavour detected.
- hostip: add missing `HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID` guard.
- lib: simplify classic mac feature guards.
Follow-up to a8861b6ccd#9764Closes#15543
The gethostbyname(3) family was removed in POSIX-1.2008 in favor of
getaddrinfo(3) introduced in POSIX-1.2001. Modern POSIX systems such as
Sortix does not have gethostbyname nor the related definitions and
structures.
curl already only uses getaddrinfo(3) if available and thread safe,
although there is mild breakage if the related gethostbyname definitions
are missing.
This change attempts to fix that breakage:
Remove an unnecessary configure error if gethostbyname is missing since
getaddrinfo is enough as a fallback.
Rewrite Curl_ip2addr to not use struct hostent as it no longer is
standardized and create the struct Curl_addrinfo directly.
Only define the Curl_he2ai function on non-getaddrinfo systems where it
is going to be used with struct hoestent.
Revoke the fallback logic for when it's unknown whether getaddrinfo is
thread safe. It doesn't appear to make any sense since h_errno is
unrelated to getaddrinfo. The logic prevents new POSIX.1-2024 systems
from passing the thread safety test since h_errno does not exist anymore
and POSIX already requires getaddrinfo to be thread safe. There's
already a denylist in place for operating systems with known buggy
implementations.
Closes#15475
Use these words and casing more consistently across text, comments and
one curl tool output:
AIX, ALPN, ANSI, BSD, Cygwin, Darwin, FreeBSD, GitHub, HP-UX, Linux,
macOS, MS-DOS, MSYS, MinGW, NTLM, POSIX, Solaris, UNIX, Unix, Unicode,
WINE, WebDAV, Win32, winbind, WinIDN, Windows, Windows CE, Winsock.
Mostly OS names and a few more.
Also a couple of other minor text fixups.
Closes#14360
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
Before this patch, two macros were used to guard IPv6 features in curl
sources: `ENABLE_IPV6` and `USE_IPV6`. This patch makes the source use
the latter for consistency with other similar switches.
`-DENABLE_IPV6` remains accepted for compatibility as a synonym for
`-DUSE_IPV6`, when passed to the compiler.
`ENABLE_IPV6` also remains the name of the CMake and `Makefile.vc`
options to control this feature.
Closes#13349
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Commit 3b16575ae9 removed support for
building on Novell Netware, but a few leftover traces remained. This
removes the last bits.
Closes: #9966
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
Move the definition of sockaddr_un struct from config-win32.h to
curl_setup.h, so that it could be shared by all build systems.
Add ADDRESS_FAMILY typedef for old mingw, now old mingw can also use
unix sockets.
Also fix the build of tests/server/sws.c on Win32 when USE_UNIX_SOCKETS
is defined.
Closes#7034
To reduce the amount of allocations needed for creating a Curl_addrinfo
struct, make a single larger malloc instead of three separate smaller
ones.
Closes#5533
- Stick to a single unified way to use structs
- Make checksrc complain on 'typedef struct {'
- Allow them in tests, public headers and examples
- Let MD4_CTX, MD5_CTX, and SHA256_CTX typedefs remain as they actually
typedef different types/structs depending on build conditions.
Closes#5338
Coverity warned for two potentional "Use after free" cases. Both are false
positives because the memory wasn't used, it was only the actual pointer
value that was logged.
The fix still changes the order of execution to avoid the warnings.
Coverity CID 1443033 and 1443034
Closes#3671
Windows 10.0.17061 SDK introduces support for Unix Domain Sockets.
Added the necessary include file to curl_addrinfo.c.
Note: The SDK (which is considered beta) has to be installed, VS 2017
project file has to be re-targeted for Windows 10.0.17061 and #define
enabled in config-win32.h.
curl_addrinfo.c:519:20: error: conversion to ‘curl_socklen_t {aka
unsigned int}’ from ‘long unsigned int’ may alter its value
[-Werror=conversion]
Follow-up to 1d786faee1
In addition to unix domain sockets, Linux also supports an
abstract namespace which is independent of the filesystem.
In order to support it, add new CURLOPT_ABSTRACT_UNIX_SOCKET
option which uses the same storage as CURLOPT_UNIX_SOCKET_PATH
internally, along with a flag to specify abstract socket.
On non-supporting platforms, the abstract address will be
interpreted as an empty string and fail gracefully.
Also add new --abstract-unix-socket tool parameter.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Reported-by: Chungtsun Li (typeless)
Reviewed-by: Daniel Stenberg
Reviewed-by: Peter Wu
Closes#1197Fixes#1061
Use getaddrinfo() to resolve the IPv4 address literal on iOS/Mac OS X.
If the current network interface doesn’t support IPv4, but supports
IPv6, NAT64, and DNS64.
Closes#866Fixes#863
curl_printf.h defines printf to curl_mprintf, etc. This can cause
problems with external headers which may use
__attribute__((format(printf, ...))) markers etc.
To avoid that they cause problems with system includes, we include
curl_printf.h after any system headers. That makes the three last
headers to always be, and we keep them in this order:
curl_printf.h
curl_memory.h
memdebug.h
None of them include system headers, they all do funny #defines.
Reported-by: David Benjamin
Fixes#743
The name of the header guard in lwIP's <lwip/opt.h> has changed from
'__LWIP_OPT_H__' to 'LWIP_HDR_OPT_H' (bug #35874 in May 2015).
Other fixes:
- In curl_setup.h, the problem with an old PSDK doesn't apply if lwIP is
used.
- In memdebug.h, the 'socket' should be undefined first due to lwIP's
lwip_socket() macro.
- In curl_addrinfo.c lwIP's getaddrinfo() + freeaddrinfo() macros need
special handling because they were undef'ed in memdebug.h.
- In select.c we can't use preprocessor conditionals inside select if
MSVC and select is a macro, as it is with lwIP.
http://curl.haxx.se/mail/lib-2015-12/0023.htmlhttp://curl.haxx.se/mail/lib-2015-12/0024.html
