To:
- see if build tool makes a difference for flaky 8x pytest slowdowns.
- to make this job finished faster.
`curl -V`, number of runtests (1793) and pytests (568/159) verified
to remain the same.
Closes#20211
Number of jobs down to 34 (from 56 at end of last year.)
Out of them 7 autotools (was 24 at end of last year.)
Also:
- stop install brew packages preinstalled.
- make some dependency options explicit.
Closes#20203
To save 0.5 to 3 minutes per job.
There remain 7 main autotools jobs, plus 1 in combinations and 1 more
for iOS.
Also:
- fix to disable MQTT, WebSockets, IPFS in HTTP-only job.
Closes#20193
To reduce the number of jobs, and the time spent running macos runners.
The curl codebase has just a few Apple-specific parts, and they remain
well-covered after this patch.
Makes the number of jobs 24, down from 32.
Perhaps more jobs could be merged or dropped, and CPU use reduced by
moving some to cmake. Unique, but not Apple-specific jobs may also be
moved to Linux.
Follow-up to b869932392#20178Closes#20187
- drop autotools (except one) from combination jobs.
They seem to add little value over cmake ones, yet take a lot of time
even after restricting them to shared libs.
20-25s to install autotools via Homebrew, for each 11 jobs. autoreconf
taking 10s, configure 25s, build 30-35s. A total of 1m30s to 1m45s per
job. Sometimes jumping up to 2-4 minutes.
Compare this to 20-25s total job times with cmake.
Keep one job with an indentical cmake pair to help detecting
build-tool-specific fallouts.
- drop more combination jobs.
To avoid overlap with main build jobs.
Reducing number of jobs to 9, from 22 (-13),
total job time to 5.5 minutes, from 25 (-20m).
Before: https://github.com/curl/curl/actions/runs/20637652089
After: https://github.com/curl/curl/actions/runs/20686390641?pr=20178
Considering the small amount of Apple-specific code in curl since
dropping Secure Transport, and that most combination issue were in
the toolchains, not curl, there is likely more room to avoid wasting
cycles (at 41 macOS + 3 iOS jobs after this patch).
Follow-up to d057b705fd#20167Closes#20178
It also means that now all torture test-pairs use the same shallowness,
while earlier FTP used 20.
Also:
- This made macOS torture jobs slow enough to split them into 3 jobs.
Follow-up to 2cbcde90e7#20153Closes#20172
To avoid building libcurl in both static and shared flavor by default.
It results in 1.5-2.x speed-up for the curl build step in most jobs.
Saving a total of 6-7 minutes. In the Cygwin job alone it saves 1-1.5m.
Also:
- enable static + shared in a Windows job to keep testing this combo.
Follow-up to ff958fc4b2#20159Closes#20167
To make CI turnaround time shorter, by cutting the longest running jobs.
After this patch all jobs should finish around 10-11 minutes. Down from
15-16 minutes before this patch.
Suggested-by: Stefan Eissing
The fuzzing workflow is now the slowest (with a 7-minute startup time
needed to build deps from source on each run), followed by macOS
and Windows torture tests (both split in two now). Without fuzzing, it's
under 10 minutes.
Notes:
- an extra cost with job-pairs is installing prereqs,
configuring/building curl and tests twice. GitHub doesn't support
making a matrix job a prereq for another workflow that may fix this:
https://github.com/orgs/community/discussions/42335
This overhead is significant on Windows: 11m20 -> 9m20 + 8m40
- job-pairs are annoying to maintain and keep in sync.
- splitting tests into halves is a manual process and needs to be
revisited from time to time. Possibly something to automate with
a runtests option, e.g. with `1 of 50%` and `2 of 50%`?
Also:
- split torture tests in two equal pieces, replacing the `FTP` + `!FTP`
split used earlier.
Related perf improvements from today:
- make scan-build 2x fast:
ff958fc4b2#20159
- drop build-only Testi386 fuzz workflow (from curl), saving 9m per run:
0106023c1fhttps://github.com/curl/curl-fuzzer/pull/236Closes#20153
To detect mistakes made in the runtests framework that reduce
the number of test runs. Before this patch it could go undetected with
a green CI.
The minimum thresholds will need light maintenance going forward (either
bumping them periodically, or adjust if some may fell below minimums for
justified reasons). We may also make minimums tighter or looser, or more
job-specific.
Latest number of test runs for each job can be seen at Test Clutch:
https://testclutch.curl.se/static/reports/feature-matrix.html
Also:
- GHA: set minimums.
Assisted-by: Dan Fandrich
Follow-up to f2a75a14dd
Follow-up to bb1391f943#19510Closes#19942
- drop stray duplicate empty lines in docs, scripts, test data, include,
examples, tests.
- drop duplicate PP parenthesis.
- curl-functions.m4: move literals to the right side in if expressions,
to match rest of the source code.
- FAQ.md: delete language designator from an URL.
- packages: apply clang-format (OS400, VMS).
- scripts/schemetable.c: apply clang-format.
- data320: delete duplicate empty line that doesn't change the outcome.
- spacecheck: extend to check for duplicate empty lines
(with exceptions.)
- fix whitespace nits
Closes#19936
Only the `test-ci` build target sets `--buildinfo` automatically,
since 985f39c0ce. It needs to be set
manually for other targets used in CI, such as `test-torture`,
to enable the `buildinfo.txt` dump in the runtests step.
For Test Clutch. In an attempt to re-sync `targetarch` with the rest of
macOS jobs on the feature matrix page:
https://testclutch.curl.se/static/reports/feature-matrix.html
Before this patch and possibly since the breaking update It's `aarch64e`
for torture jobs and `aarch64` for the rest
(stricly speaking `aarch64e` is the correct value for all macOS jobs, but
autotools and cmake report arm64/aarch64 without the `e`.)
Regression from 985f39c0ce#18147Closes#19601
It also does shellcheck on `run:` elements, overlapping with
the homegrown `shellcheck-ci.sh` with the same purpose. But it also does
more and perhaps could replace the script too, especially in curl
sub-repos.
Also:
- GHA/macos: delete potentially useful, but commented, and ultimately
unused, non-default Xcode-testing logic. It's causing unused matrix
exceptions, upsetting actionlint.
Ref: https://github.com/rhysd/actionlintCloses#19373
The kerberos5 library Heimdal is one of three GSS libraries curl support.
It has a memory leak triggered by the new test in #18917 and the project
seems mostly abandoned.
Drop support and steer users to the MIT krb5 or GNU GSS libraries.
Co-authored-by: Daniel Stenberg
Ref: #18928Closes#18928Closes#18932
Build these examples when the necessary dependencies are present:
- cacertinmem, usercertinmem (OpenSSL/fork)
- multi-uv (libuv)
- multithread, threaded-ssl (pthread)
- sessioninfo (GnuTLS)
Indicate the necessary dependency via a `Required:` comment placed in
the source file. A single dependency per source is supported as of now.
The name of the dependency should match the variable used within
the cmake scripts, which in turn matches the macro used in the config
header. E.g. for GnuTLS it's `USE_GNUTLS`.
Also:
- GHA/macos: build examples in two job to test GnuTLS and pthread ones.
- GHA/linux: enable libuv to test it with examples.
Follow-up to 6bb7714032#18914Closes#18909
- http3-linux: move local nghttpx (nghttp2) build to openssl (from
quictls). Also tried LibreSSL, but it made some HTTP/2 tests fails.
- http3-linux: drop quictls ngtcp2 build.
- http3-linux: build local openssl with `no-deprecated`.
(previously tested in the quictls local build.)
- http3-linux: explicitly disable LDAP in cmake openssl jobs.
cmake builds auto-detect OpenLDAP (autotools don't), and when enabled,
linking curl fails because system `libsasl.so` requires MD5 openssl
functions, which are missing from openssl no-deprecated builds.
- macos: move options tested in quictls jobs to other ones.
- linux: drop unused quictls local build. (it was used for msh3.)
Follow-up to 91138b014d#17729
- renovate: drop quictls bump detection.
Closes#18833
- configure/cmake support for enabling the option
- supported in OpenSSL and GnuTLS backends
- when configured, Apple SecTrust is the default trust store
for peer verification. When one of the CURLOPT_* for adding
certificates is used, that default does not apply.
- add documentation of build options and SSL use
Closes#18703
To test it in GHA and catch issues at PR time. Before this patch,
Circle CI caught them after pushing to master (or non-fork PR
branches.) GHA also run runtests, pytests and static analysis on
these builds, after this patch.
- GHA/linux: enable no-verbose in an existing job.
- GHA/linux: enable no-verbose in the H3 scan-build job too.
- GHA/macos: enable no-verbose in one build (= 3 jobs with different
compilers).
- GHA/codeql: enable no-verbose in the MultiSSL Linux build.
- circleci: delete openssl no-verbose job in favor of the above.
Closes#18797
Also:
- point the source tarball to a working URL.
The GitHub release page misses the official source tarball for 4.1.1.
- GHA/linux: switch LibreSSL build to cmake (syncing with http3-linux.)
- GHA/macos: drop no longer needed LibreSSL build workaround.
Closes#18792
To avoid typos and non-existing options passed to `./configure` in CI
builds.
Also delete obsolete option `--enable-test-bundles` from Circle CI jobs.
Closes#18759
- requirements.txt: shorten copyright headers.
- requirements.txt: pin packages to versions.
- GHA/windows: use `tests/requirements.txt`.
Pick a `cryptography` package version that satifies both `impacket`
and pytests dependencies.
- GHA/checksrc: move pip deps into a new `requirements.txt`.
To make Dependabot detect and bump them.
- GHA/checksrc: replace apt packages for python test deps with pip
install `tests/**/requirements.txt` to a venv.
- GHA/checksrc: use venv and drop `--break-system-packages`.
- GHA/linux: fix to actually activate venvs.
Follow-up to 2638570241#15578
- GHA/linux: fixup (did not cause an issue)
Follow-up to d75785c7de#18660
- GHA: create venvs later, simplify commands.
- GHA: sync pip command-line options, e.g. drop progress-bar,
everywhere.
Assisted-by: Dan Fandrich
Closes#18708
The implementation was incomplete and lesser than the other backends. No
one ever reported a bug or requested enhancements for this, indicating
that this backend was never used.
Closes#18700
Number of combo jobs down to 22 from 24.
Also:
- update the version matrix.
- update exclusion matrix.
- include verbose compiler configuration dump.
It makes the Apple-included, default `-I/usr/local/include` visible.
Ref: #18683Closes#18698
This is an effort to pass more code through clang-tidt and scan-build
static analyzers. Following CodeQL Linux jobs.
GHA/codeql:
- also build with libssh.
- disable verbose output in build steps.
GHA/linux:
- enable more build options for the clang-tidy and scan-build jobs:
libidn2, nghttp2, ldap, kerberos, rtmp, gnutls, gsasl, rustls,
mbedtls, wolfssl
Use Linuxbrew where necessary.
- also enable ECH, gssapi in the scan-build job.
- fix 'scanbuild' to be 'scan-build' in the job name.
GHA/macos:
- build with Rustls in the clang-tidy job.
- add a new clang-tidy job to test HTTP/3 (with openssl + ngtcp2).
- build with libssh in one of the clang-tidy jobs.
- build with LibreSSL in the MultiSSL clang-tidy job.
- build with heimdal and kerberos in the clang-tidy jobs respectively.
- build with OpenLDAP in one clang-tidy job.
- add support for `skipall`, `skiprun` job options, and use it.
Closes#18660
In CI we want to ensure that examples build cleanly, but we don't want
to actually run them there. Meaning it's enough to just compile, but not
link them in CI. Saving time up to 2-4x (MSVC), and disk space up
to 1.2GB (or 8-70x).
Add a new cmake target that compiles all examples without linking them
into runnable binaries. Keep a full build for a single example to test
if it links correctly.
Also:
- CI: switch over all `curl-examples` targets to `curl-examples-build`
- GHA/linux-old: build examples in one of the cmake builds.
Result highlights:
Job | Bef. | Bef. | Aft. | Aft. |
:------------------ | ---: | ----: | ---: |----: |
cygwin | 15s | 9MB | 10s | 1MB |
msys | 13s | 8MB | 7s | 1MB |
dl-mingw 15 | 39s | 113M | 34s | 2MB |
dl-mingw 9.5.0 | 49s | 115MB | 42s | 2MB |
dl-mingw 7.3.0 | 19s | 113MB | 14s | 2MB |
dl-mingw 6.4.0 | 9s | 12MB | 7s | 4MB |
Linux cross | 19s | 28MB | 19s | 2MB |
MSVC UWP | 65s | 374MB | 9s | 17MB |
MSVC x64 | 22s | 846MB | 9s | 17MB |
VS2010 | 48s | 105MB | 15s | 9MB |
VS2022 clang-cl | 195s | 1.2GB | 51s | 20MB |
iOS Xcode | 8s | | 5s | |
macOS LibreSSL | 16s | | 11s | |
Linux aws-lc | 3s | | 1s | |
Follow-up to dda251ef10#18232Closes#18209
Also:
- GHA/linux, macos: test `install` with autotools too.
- GHA/linux, macos: enable fish and zsh completion in an autotools job.
- scripts: drop dynamic perl checks redundant after this patch.
- scripts: drop two interim variables.
- autotools: make `build-certs` target check perl first.
- autotools: replace `$(PERL)` with `@PERL@` to match the pattern used
in most automake scripts. For consistency. This makes `PERL` be
defined at configure-time, as opposed to make-time, for these cases
now.
Closes#18141
- runtests: fix `codeset-utf8` feature detection. Before this patch it
detected if the calling environment had UTF-8 enabled. If not, UTF-8
tests were all skipped. After this patch, it detects if UTF-8 is
supported by the calling environment regardless of what's currently
enabled.
Follow-up to 0b70b23ef4#15039
- GHA/linux: sync `codeset-test` to also reset `LC_CTYPE` and
`LC_NUMBER`. To give it more spin.
Follow-up to c221c0ee59#17938
- GHA/macos: fix to actually enable `codeset-test`. Also set `LC_ALL`,
which seems necessary to trigger issues.
Follow-up to c221c0ee59#17938
- tests/data: replace `LC_CTYPE` env with `LC_ALL` in all tests
requiring a locale. Also to avoid potential issues with a blank or
unset `LC_ALL`, as seen earlier. And to ensure that the override works
on all platforms (as tested in CI.)
Slight downside is that this now resets the language/culture to `C`.
Ref: b4c9982382#4743
Ref: 23208e330a#4738
- replace `en_US.UTF-8` with `C.UTF-8` to be language/culture-agnostic.
- TEST-SUITE.md: drop `UTF-8` as a requirement for tests.
Tests shall work (or least be skipped) without UTF-8 support.
Tests requiring UTF-8 locale:
165, 962, 963, 964, 965, 966, 967, 1448, 1560, 2046, 2047
Tests requiring UTF-8 locale, but passing without one anyway:
955, 956, 957, 958, 959, 960, 961, 968, 1034, 1035
Spec 1997: https://pubs.opengroup.org/onlinepubs/7908799/xbd/envvar.html
Spec 2008: https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html
Ref: c221c0ee59#17938
Ref: 7cf8414fab
Ref: 4c140a5628
Ref: 28faaacee2#2436
Ref: ecd1d020abCloses#17988
To fix running test 1560 when `LC_ALL` is set to something unexpected
(e.g. `C`). Also syncing it with the rest of tests.
Also:
- GHA/linux: enable `libidn2` in more jobs.
Also to enable test 1560 reproducing this issue in more jobs.
- GHA/linux: run tests with `LC_ALL=C` in one of the jobs.
- GHA/linux: switch to the non-deprecated package name for libidn2.
- GHA/macos: run tests with non-default locale settings in one job.
- GHA/macos: enable AppleIDN in that job.
Ref: https://github.com/curl/curl/pull/17933#issuecomment-3074582840
Follow-up to f27262b179#10196Closes#17938
