This bit was used to do Digest authentication like Internet Explorer
before version 7 (released on October 18, 2006). Presumably no one uses
this anymore and since it is hard to use and does broken auth, starting
in 8.21.0 this bit does nothing (except setting the actual Digest bit).
Closes#21486
- passing an unknown string to CURLOPT_ECH now returns error
To properly allow applications to spot if they pass in a typo or
something to libcurl.
- CURLECH_DISABLE is now a plain zero internally, not a dedicated bit which
simplifies checks for when ECH is enabled
- Dropped the CURLECH_CLA_CFG bit, and just check STRING_ECH_CONFIG
- Turn grease/enable/hard into three different numerical values, no bitmask
needed
- Convert the struct field 'tls_ech' from an int to a byte.
Closes#21532
`struct Curl_peer` keeps information about a communication endpoint
together. It will replace `conn->host` and `conn->conn_to_host` and
proxyinfo host. It will also become part of `struct ssl_peer`.
It has a reference counter, so an instance can be shared between
connections and filters.
Elminiates `conn->host` and `conn->connect_to_host`, used in the
proxyinfo structures. Passed to DNS resolution and socks filters, etc.
Pass peer to http proxy and socks tunnel filters. Use peer in dns filter
and resolving. Make `Curl_peer` a member in the `struct ssl_peer`.
Add `docs/internals/PEERS.md` for documentation.
Closes#21472
So that CURLcode failure is correct and not figured out later via
`conn->bits.proxy`. Add the flag to the async struct.
`for_proxy` is figured out by the caller of Curl_resolv() when it
figures out which host/proxy name it wants the addresses for.
Remove CONN_IS_PROXIED macro as no longer needed.
Closes#21423
Since we have a new struct instance for each async operation now and
async operation may happen in parallel, remove the connection bit
indicating doh is in progress.
Closes#21422
To make it scoped for the single request appropriately.
Reported-by: Muhamad Arga Reksapati
Verify with libtest 2504: a custom Host *disabled* on reused handle
Closes#21312
- examples: sync debug output printf masks.
- INSTALL-CMAKE.md: tidy up section for some options.
- curl_sha512_256: delete comment suggesting an optimization.
- vtls/keylog: scope a variable.
- vtls/openssl: make a source code URL a permalink.
- vtls/schannel: drop redundant parentheses.
- test1119.pl: robustify `$1` -> `$s`.
- sync arg names in comments to match the code.
- tidy up and minor fixes to comments.
- fix formatting/indenting/comment/newline/include nits.
- move `UNITTEST` protos next to definitions, sync their argument names.
- make variables static.
- add parentheses to Perl `open()` calls.
- drop unnecessary double quotes in Perl.
- clang-format.
Closes#21000
- allow to specify when they are wanted on starting a resolve
- match dns cache entries accordingly. An entry which never
tried to get HTTPS-RRs is no answer for a resolve that wants
it.
- fix late arrivals of resolve answers to match the "async"
records that started them - if it still exists.
- provide for multiple "async" resolves in a transfer at the
same time. We may need to resolve an IP interface while the
main connection resolve has not finished yet.
- allow lookup of HTTPS-RR information as soon as it is
available, even if A/AAAA queries are still ongoing.
For this, the "async" infrastructure is changed:
- Defined bits for DNS queries `CURL_DNSQ_A`, `CURL_DNSQ_AAAA`
and `CURL_DNSQ_HTTPS`. These replace `ip_version` which says
nothing about HTTPS.
Use them in dns cache entries for matching.
- enhance the `async->id` to be a unique `uint32_t` for
resolves inside one multi. This is weak, as the id may
wrap around. However it is combined with the `mid` of
the easy handle, making collisions highly unlikely.
`data->state.async` is only accessed in few places where
the mid/async-id match is performed.
- vtls: for ECH supporting TLS backends (openssl, rustls, wolfssl),
retrieve the HTTPS-RR information from the dns connection filter.
Delay the connect if the HTTPS-RR is needed, but has not
been resolved yet.
The implementation of all this is complete for the threaded
resolver. c-ares resolver and DoH do not take advantage of
all new async features yet. To be done in separate PRs.
Details:
c-ares: cleanup settings and initialisation. Any ares channel
is only being created on starting a resolve and propagating
operations in setopt.c to the channel are not helpful.
Changed threaded+ares pollset handling so that they do not
overwrite each others `ASYNC_NAME` timeouts.
Add trace name 'threads' for tracing thread queue and
pool used by threaded resolver.
Closes#21175
New connection filter `cf-dns` that manages DNS queries. If hands
out addresses and HTTPS-RR records to anyone interested. Used by
HTTPS and IP happy eyeballing.
Information may become available *before* the libcurl "dns entry"
is complete, e.g. all queries have been answered. The cf-ip-happy
filter uses this information to start connection attempts as soon
as the first address is available.
The multi MSTATE_RESOLVING was removed. A new connection always
goes to MSTATE_CONNECTING. The connectdata bit `dns_resolved`
indicates when DNS information is complete. This is used for
error reporting and starting the progress meter.
Removed dns entries `data->state.dns[i]`, as the `cf-dns` filter
now keeps the reference now.
Many minor tweaks for making this work and pass address information
around safely.
Closes#21027
... and apply the CURLOPT_MAXFILESIZE limit (if set) on that as well.
This effectively protects the user against "zip bombs".
Test case 1618 verifies using a 14 byte brotli payload that otherwise
explodes to 102400 zero bytes.
Closes#20787
- Rename `Curl_resolv_unlink()` to `Curl_dns_entry_unlink()`.
- Change `Curl_dnscache_get()` to return CURLcode result. Returns
now `CURLE_COULDNT_RESOLVE_HOST` for "negative" cache entries.
- Add `Curl_dnscache_add_negative()` to put a "negative" entry
into the cache.
Closes#20864
Add protocol.h and protocol.c containing all about libcurl's
known URI schemes and their protocol handlers (so they exist).
Moves the scheme definitions from the various sources files into
protocol.c. Schemes are known and used, even of the protocol
handler is not build or just not implemented at all.
Closes#20906
Improve the name, type and handling of `data->req.keepon`:
- Rename `keepon` to `io_flags`
- make `io_flags` and `uint8_t` and reposition in struct
- Rename `KEEP_*` defines to `REQ_IO_*`, move to request.h
- Replace all direct bit tests to `CURL_REQ_WANT_*` use
- Replace all direct bit manipulations with new macros
Closes#20905
Convert more `int port` to `uint16_t` port types. Reshuffle ports in
connectdata to save some bytes. Change `conn->destination` format to
- make it more readable and thus usable in tracing
- add the IPv6 scope_id only when not default (global)
and make it resemble more the textual format for IPv6
(e.g. suffix '%<scope_id>')
Closes#20918
Eliminate `conn->bits.ipv6_ip`
The bit was only correct for the first transfer using a connection. Use
`data->state.up.hostname` instead in places that need the URL hostname
in its original form.
Fix parseurlandfillconn() to not modify `data->state.up.hostname` before
copying the connection's hostname, but modify the copy instead, leaving
the URL hostname intact.
Closes#20919
- Move `RESP_TIMEOUT` from urldata.h to pingpong.h as
`PINGPONG_TIMEOUT_MS`.
- Rename `Curl_pp_state_timeout()` to `Curl_pp_state_timeleft_ms()` as
the function returns the time left, not the timout..
- Update implementation comments and variable names
Closes#20888
The protocol handler method `connection_check` allowed to variable
operations to trigger with variable result bits. Only the `CONNCHECK_ISDEAD`
and `CONNRESULT_DEAD` were in use. Transform the function into
`connection_is_dead` without extra parameter and a bool result.
- Remove defines for `CONNCHECK_*` and `CONNRESULT_*`
- Rename protocol function in handler comments
- Change RTSP implementation (only protocol that uses this)
Closes#20890
The strdup() of the hostname to resolve is unnecessary as the sync
resolve code does not keep the string and the async code makes copies
already.
Remove the member from `connectdata`.
Closes#20833
- the value collided with the internal one used for WebSocket
- we add all new ones as internal bits
- bump to 64-bit internal type
- introduce new define for setting all protocols (CURLPROTO_64ALL)
Reported by Codex Security
Closes#20798
- vms/curlmsg_vms.h: delete unused/commented code.
- vtls/schannel_verify: sort includes.
- typecheck-gcc.h: fix indent and alignment.
- lib/config-win32.h: drop idle `#undef`.
- spacecheck: check for stray empty lines before after curly braces.
- make literals more readable: 1048576 -> 1024 * 1024
- scope variables.
- use ISO date in a comment.
- drop redundant parentheses.
- drop empty comments.
- unfold lines.
- duplicate/stray spaces in comments.
- fix indent, whitespace, minor typos.
Closes#20690
GCC 15.2 warns when assigning computed "all" bitmask macros to 32-bit
flag types because negated masks expand to the full width of unsigned
long/long on 64-bit platforms.
Mask these macros to a 32-bit domain so they do not set high bits and
avoid -Woverflow/-Wconversion warnings in callers.
Reported-by: Patrick Monnerat
Fixes#20242Closes#20416
When the compiler supports C99.
- map logging functions to macro stubs when verbose logging is disabled
and the compiler is C99. Make sure these stubs silence unused variable
warnings for non-variadic arguments.
Before this patch they mapped to function stubs, the same codepath
used for C89 compiler in this configuration.
- introduce new macros to tell the compiler which code to include
when verbose code is active, or inactive:
- `CURLVERBOSE`: defined when verbose code is active.
To enclose blocks of code only used for verbose logging.
- `VERBOSE(statement);`:
compile statement when verbose code is active.
To mark code lines only used for verbose logging.
- `NOVERBOSE(statement);`:
compile statement when verbose code is inactive.
To suppress warnings for arguments passed to logging functions via
printf masks, e.g. `NOVERBOSE((void)ipaddress);`, yet keeping
the warning in verbose builds.
Note these macros are not the same as `CURL_DISABLE_VERBOSE_STRINGS`.
Verbose code is always active in C89 mode (without variadic macro
support).
- drop existing uses of `CURL_DISABLE_VERBOSE_STRINGS` where redundant,
or replace with the above macros. Ending up reducing the number of
`#ifdef`s, and also the number of lines.
Assisted-by: Daniel Stenberg
Assisted-by: Jay Satiro
Reported-by: Dan Fandrich
Fixes#20341
Refs: #12105#12167Closes#20353
This allows builds know about all schemes - but only have the protocol
implementations for those actually built-in.
It further allows multiple protocols to reuse the same protocol setup
and functions for both TLS and non-TLS implementations instead of
needing two (or more) structs.
The scheme information is now in 'struct Curl_scheme' and all the
function pointers for each scheme/protocol implementation are in struct
Curl_protocol.
The URL API now always work with all known protocols.
Closes#20351
Add casts to `bool`, or use `bit` type in local variables, where
neccessary to avoid MSVC compiler warnings C4242.
Note: There may remain places needing the above updates, where not
tested in CI, and missed in manual review.
Also:
- urldata: convert struct field `connect_only` to bitfield to match its
counterpart in another struct.
- rename curl-specific `bit` type to `curl_bit`.
Closes#20142
This makes the easy handle 432 bytes smaller (totally 5352 bytes on my
rather maximized Linux 64 bit build). The 440 byte mimepost struct is
now allocated only when needed.
Closes#20260
Makes sure they work identically cross-platform, as long varies in size
between Windows vs non-Windows. Makes Curl_easy 16 bytes smaller on 64
bit Linux.
This reduces support for the RTSP cseq counters to 32 bit (down from 63
bit previously on 64 bit non-Windows), but it is probably safe.
Implementations probably rarely support anything above 32 bits anyway
and this is how curl has worked on Windows since always.
There is now only one 'long' left in urldata.h (in the ssl_config_data
struct). That field, certverifyresult, is used to store the response
code from TLS backend code and in the OpenSSL case that function returns
an actual 'long'.
Closes#20227
In particular, it turns 'unsigned long' into 'uint32_t' since the code
needs to build and run just as fine on Windows which has 32 bit longs,
so we know the code works with 32 bit field versions.
This makes Curl_easy 56 bytes smaller on my 64 bit Linux (maximized
build).
Closes#20209
- asyn-thrdd.c: scope an include.
- apply more clang-format suggestions.
- tidy-up PP guard comments.
- delete empty line from the top of headers.
- add empty line after `curl_setup.h` include where missing.
- fix indent.
- CODE_STYLE.md: add `strcpy`.
Follow-up to 8636ad55df#20088
- lib1901.c: drop unnecessary line.
Follow-up to 436e67f65b#20076Closes#20070
- drop unused `http.h` includes.
- drop unused `http1.h` include.
- drop unused `http2.h` includes.
- vssh/ssh.h: drop unused `vssh.h` include.
- urldata.h: drop unused protocol includes.
- url: include `smtp.h` directly.
- rtsp.h: include directly where used.
- imap, smtp: drop redundant include, move another from .h to .c.
Verified with an all non-unity CI run.
Closes#20093
- curl_range: replace `sendf.h` with direct header dependency
`curl_trc.h`.
- drop `curl/curl.h` includes from internal sourcees in favor of the
include made from `curl_setup.h`. Replace it with the latter where
it's the only include.
- include `curl_setup.h` before using macros, where missing.
- drop redundant `stdlib.h`, `string.h` includes, in favor of
`curl_setup_once.h` including them.
- drop redundant `limits.h` in favor of `curl_setup.h` including it.
- fake_addrinfo.h: fix typo in comment.
- curl_setup_once.h: drop `stdio.h` in favor of earlier include in
`curl_setup.h`.
- drop stray, unused, `stddef.h` includes.
- memdebug.h: add missing `stddef.h` include. (relying on accidental
includes via other headers before this patch.)
- stddef.h: document why it's included.
- strerr: drop `curl/mprintf.h` in favor of `curl/curl.h` including it
via `curl_setup.h`.
Closes#20027
