- compiler analyzer did not include the call context for this
static function where the condition had already been checked.
- eleminating the problem by making stream a call parameter
Fixes#11147Closes#11151
This works around #11138, by doubling the limit, and should be a
relatively safe fix.
Ideally the buffer would grow as needed and there would be no need for a
limit? But that might be follow-up material.
Fixes#11138Closes#11139
Out of 415 labels throughout the code base, 86 of those labels were
not at the start of the line. Which means labels always at the start of
the line is the favoured style overall with 329 instances.
Out of the 86 labels not at the start of the line:
* 75 were indented with the same indentation level of the following line
* 8 were indented with exactly one space
* 2 were indented with one fewer indentation level then the following
line
* 1 was indented with the indentation level of the following line minus
three space (probably unintentional)
Co-Authored-By: Viktor Szakats
Closes#11134
If the previous line starts with if/while/for AND ends with a closed
parenthesis and there's an equal number of open and closed parentheses
on that line, verify that this line is indented $indent more steps, if
not a cpp line.
Also adjust the fall-out from this fix.
Closes#11054
- `drain` was used by http/2 and http/3 implementations to indicate
that the transfer requires send/recv independant from its socket
poll state. Intended as a counter, it was used as bool flag only.
- a similar mechanism exists on `connectdata->cselect_bits` where
specific protocols can indicate something similar, only for the
whole connection.
- `cselect_bits` are cleard in transfer.c on use and, importantly,
also set when the transfer loop expended its `maxloops` tries.
`drain` was not cleared by transfer and the http2/3 implementations
had to take care of that.
- `dselect_bits` is cleared *and* set by the transfer loop. http2/3
does no longer clear it, only set when new events happen.
This change unifies the handling of socket poll overrides, extending
`cselect_bits` by a easy handle specific value and a common treatment in
transfers.
Closes#11005
- with `--proxy-http2` allow h2 ALPN negotiation to
forward proxies
- applies to http: requests against a https: proxy only,
as https: requests will auto-tunnel
- adding a HTTP/1 request parser in http1.c
- removed h2h3.c
- using new request parser in nghttp2 and all h3 backends
- adding test 2603 for request parser
- adding h2 proxy test cases to test_10_*
scorecard.py: request scoring accidentally always run curl
with '-v'. Removed that, expect double numbers.
labeller: added http1.* and h2-proxy sources to detection
Closes#10967
- callbacks and filter methods might be invoked at unexpected
times, e.g. when the transfer's stream_ctx has not been initialized
yet or, more likely, has already been taken down.
- check for existance of stream_ctx in such places and return
an error or silently succeed the call.
Closes#10951
- remove NGHTTP2 members of `struct HTTP`
- add `void *h2_ctx` to `struct HTTP`
- add `void *h3_ctx` to `struct HTTP`
- separate h2/h3 pointers are needed for eyeballing
- manage local stream_ctx in http implementations
Closes#10877
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
- ngtcp2: using bufq for recv stream data
- internal stream_ctx instead of `struct HTTP` members
for quiche, ngtcp2 and msh3
- no more QUIC related members in `struct HTTP`
- experimental use of recvmmsg(), disabled by default
- testing on my old debian box shows no throughput improvements.
- leaving it in, but disabled, for future revisit
- vquic: common UDP receive code for ngtcp2 and quiche
- vquic: common UDP send code for ngtcp2 and quiche
- added pytest skips for known msh3 failures
- fix unit2601 to survive torture testing
- quiche: using latest `master` from quiche and enabling large download
tests, now that key change is supported
- fixing test_07_21 where retry handling of starting a stream
was faulty
- msh3: use bufq for recv buffering headers and data
- msh3: replace fprintf debug logging with LOG_CF where possible
- msh3: force QUIC expire timers on recv/send to have more than
1 request per second served
Closes#10772
- make configure show on HTTP3 feature that both ngtcp2 and nghttp3
are in play
- define ENABLE_QUIC only when USE_NGTCP2 and USE_NGHTTP3 are defined
- add USE_NGHTTP3 in the ngtcp2 implementation
Fixes#10793Closes#10821
- use the defined, but so far not used, KEEP_SEND_HOLD bit for flow
control based suspend of sending in transfers.
Prior to this change KEEP_SEND_PAUSE bit was used instead, but that can
interfere with pausing streams from the user side via curl_easy_pause.
Fixes https://github.com/curl/curl/issues/10751
Closes https://github.com/curl/curl/pull/10753
- add parameter to `conn_is_alive()` cfilter method that returns
if there is input data waiting on the connection
- refrain from re-using connnection from the cache that have
input pending
- adapt http/2 and http/3 alive checks to digest pending input
to check the connection state
- remove check_cxn method from openssl as that was just doing
what the socket filter now does.
- add tests for connection reuse with special server configs
Closes#10690
- time_connect was not updated when the overall connection failed,
e.g. when SSL verification was unsuccessful, refs #10670
- rework gather those values to interrogate involved filters,
also from all eyeballing attempts, to report the maximum of
those values.
- added 3 test cases in test_06 to check reported values on
successful, partially failed and totally failed connections.
Reported-by: Master Inspire
Fixes#10670Closes#10671
- when h2/h3 eyeballing was involved, unix domain socket
configurations were not honoured
- configuring --unix-socket will disable HTTP/3 as candidate for eyeballing
- combinatino of --unix-socket and --http3-only will fail during initialisation
- adding pytest test_11 to reproduce
Reported-by: Jelle van der Waa
Fixes#10633Closes#10641
vquic stabilization
- udp send code shared between ngtcp2 and quiche
- quiche handling of data and events improved
ngtcp2 and pytest improvements
- fixes handling of "drain" situations, discovered in scorecard
tests with the Caddy server.
- improvements in handling transfers that have already data or
are already closed to make an early return on recv
pytest
- adding caddy tests when available
scorecard improvemnts.
- using correct caddy port
- allowing tests for only httpd or caddy
Closes#10451
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- new functions and macros for cfilter debugging
- set CURL_DEBUG with names of cfilters where debug logging should be
enabled
- use GNUC __attribute__ to enable printf format checks during compile
Closes#10271
Using common method for SSL_CTX initialization of verfiy peer and CA
settings. This also provides X509_STORE sharing to become available for
ngtcp2+openssl HTTP/3.
Reported-by: violetlige on github
Fixes#10222Closes#10239
- adding '--with-test-httpd=<path>' to configure non-standard apache2
install
- python env and base classes for running httpd
- basic tests for connectivity with h1/h2/h3
- adding test cases for truncated responses in http versions.
- adding goaway test for HTTP/3.
- adding "stuttering" tests with parallel downloads in chunks with
varying delays between chunks.
- adding a curltest module to the httpd server, adding GOAWAY test.
- mod_curltest now installs 2 handlers
- 'echo': writing as response body what came as request body
- 'tweak': with query parameters to tweak response behaviour
- marked known fails as skip for now
Closes#10175
- ECONNECTREFUSED has not its own fail message in quic filters
- Debug logging in connect eyballing improved
- Fix bug in ngtcp2/quiche that could lead to false success reporting.
Reported-by: Divy Le Ray
Fixes#10245Closes#10248
- test 2500, single GET works
- test 2501, single POST stalls
- test 2502, multiple, sequential GETs each use a new connection since
MsH3ConnectionGetState(qconn) no longer reports CONNECTED after one
GET.
Closes#10204
- quiche in debug mode did not build, fixed.
- moved all vquic implementation files to prefix curl_* to avoid
the potential mixups between provided .h files and our own.
- quich passes test 2500 and 2502. 2501, the POST, fail with
the body being rejected. Quich bug?
Closes#10242
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Refactoring of connection setup and happy eyeballing. Move
nghttp2. ngtcp2, quiche and msh3 into connection filters.
- eyeballing cfilter that uses sub-filters for performing parallel connects
- socket cfilter for all transport types, including QUIC
- QUIC implementations in cfilter, can now participate in eyeballing
- connection setup is more dynamic in order to adapt to what filter did
really connect. Relevant to see if a SSL filter needs to be added or
if SSL has already been provided
- HTTP/3 test cases similar to HTTP/2
- multiuse of parallel transfers for HTTP/3, tested for ngtcp2 and quiche
- Fix for data attach/detach in VTLS filters that could lead to crashes
during parallel transfers.
- Eliminating setup() methods in cfilters, no longer needed.
- Improving Curl_conn_is_alive() to replace Curl_connalive() and
integrated ssl alive checks into cfilter.
- Adding CF_CNTRL_CONN_INFO_UPDATE to tell filters to update
connection into and persist it at the easy handle.
- Several more cfilter related cleanups and moves:
- stream_weigth and dependency info is now wrapped in struct
Curl_data_priority
- Curl_data_priority members depend is available in HTTP2|HTTP3
- Curl_data_priority members depend on NGHTTP2 support
- handling init/reset/cleanup of priority part of url.c
- data->state.priority same struct, but shallow copy for compares only
- PROTOPT_STREAM has been removed
- Curl_conn_is_mulitplex() now available to check on capability
- Adding query method to connection filters.
- ngtcp2+quiche: implementing query for max concurrent transfers.
- Adding is_alive and keep_alive cfilter methods. Adding DATA_SETUP event.
- setting keepalive timestamp on connect
- DATA_SETUP is called after the connection has been completely
setup (but may not connected yet) to allow filters to initialize
data members they use.
- there is no socket to be had with msh3, it is unclear how select
shall work
- manual test via "curl --http3 https://curl.se" fail with "empty
reply from server".
- Various socket/conn related cleanups:
- Curl_socket is now Curl_socket_open and in cf-socket.c
- Curl_closesocket is now Curl_socket_close and in cf-socket.c
- Curl_ssl_use has been replaced with Cur_conn_is_ssl
- Curl_conn_tcp_accepted_set has been split into
Curl_conn_tcp_listen_set and Curl_conn_tcp_accepted_set
with a clearer purpose
Closes#10141
- almost all backend calls pass the Curl_cfilter intance instead of
connectdata+sockindex
- ssl_connect_data is remove from struct connectdata and made internal
to vtls
- ssl_connect_data is allocated in the added filter, kept at cf->ctx
- added function to let a ssl filter access its ssl_primary_config and
ssl_config_data this selects the propert subfields in conn and data,
for filters added as plain or proxy
- adjusted all backends to use the changed api
- adjusted all backends to access config data via the exposed
functions, no longer using conn or data directly
cfilter renames for clear purpose:
- methods `Curl_conn_*(data, conn, sockindex)` work on the complete
filter chain at `sockindex` and connection `conn`.
- methods `Curl_cf_*(cf, ...)` work on a specific Curl_cfilter
instance.
- methods `Curl_conn_cf()` work on/with filter instances at a
connection.
- rebased and resolved some naming conflicts
- hostname validation (und session lookup) on SECONDARY use the same
name as on FIRST (again).
new debug macros and removing connectdata from function signatures where not
needed.
adapting schannel for new Curl_read_plain paramter.
Closes#9919
- Replace `Github` with `GitHub`.
- Replace `windows` with `Windows`
- Replace `advice` with `advise` where a verb is used.
- A few fixes on removing repeated words.
- Replace `a HTTP` with `an HTTP`
Closes#9802
Curl_ossl_certchain() is now an exported function in lib/vtls/openssl.c that
can also be used from quiche.c and ngtcp2.c to get the cert chain for QUIC
connections as well.
The *certchain function was moved to the top of the file for this reason.
Reported-by: Eloy Degen
Fixes#9584Closes#9597
