1. Because the value is not strictly set with a setopt option.
2. Because otherwise when duping a handle when all the set.* fields are
first copied and an error happens (think out of memory mid-function),
the function would easily free the list *before* it was deep-copied,
which could lead to a double-free.
Closes#12323
To make it work properly with curl_easy_duphandle(). This, because
duphandle duplicates the entire 'UserDefined' struct by plain copy while
'hstslist' is a linked curl_list of file names. This would lead to a
double-free when the second of the two involved easy handles were
closed.
Closes#12315
This PR has these changes:
Renaming of unencode_* to cwriter, e.g. client writers
- documentation of sendf.h functions
- move max decode stack checks back to content_encoding.c
- define writer phase which was used as order before
- introduce phases for monitoring inbetween decode phases
- offering default implementations for init/write/close
Add type paramter to client writer's do_write()
- always pass all writes through the writer stack
- writers who only care about BODY data will pass other writes unchanged
add RAW and PROTOCOL client writers
- RAW used for Curl_debug() logging of CURLINFO_DATA_IN
- PROTOCOL used for updates to data->req.bytecount, max_filesize checks and
Curl_pgrsSetDownloadCounter()
- remove all updates of data->req.bytecount and calls to
Curl_pgrsSetDownloadCounter() and Curl_debug() from other code
- adjust test457 expected output to no longer see the excess write
Closes#12184
- resolving is done for a connection, not for every transfer
- save create/dup/free of a cares channel for each transfer
- check values of setopt calls against a local channel if no
connection has been attached yet, when needed.
Closes#12198
Connection filter had a `get_select_socks()` method, inspired by the
various `getsocks` functions involved during the lifetime of a
transfer. These, depending on transfer state (CONNECT/DO/DONE/ etc.),
return sockets to monitor and flag if this shall be done for POLLIN
and/or POLLOUT.
Due to this design, sockets and flags could only be added, not
removed. This led to problems in filters like HTTP/2 where flow control
prohibits the sending of data until the peer increases the flow
window. The general transfer loop wants to write, adds POLLOUT, the
socket is writeable but no data can be written.
This leads to cpu busy loops. To prevent that, HTTP/2 did set the
`SEND_HOLD` flag of such a blocked transfer, so the transfer loop cedes
further attempts. This works if only one such filter is involved. If a
HTTP/2 transfer goes through a HTTP/2 proxy, two filters are
setting/clearing this flag and may step on each other's toes.
Connection filters `get_select_socks()` is replaced by
`adjust_pollset()`. They get passed a `struct easy_pollset` that keeps
up to `MAX_SOCKSPEREASYHANDLE` sockets and their `POLLIN|POLLOUT`
flags. This struct is initialized in `multi_getsock()` by calling the
various `getsocks()` implementations based on transfer state, as before.
After protocol handlers/transfer loop have set the sockets and flags
they want, the `easy_pollset` is *always* passed to the filters. Filters
"higher" in the chain are called first, starting at the first
not-yet-connection one. Each filter may add sockets and/or change
flags. When all flags are removed, the socket itself is removed from the
pollset.
Example:
* transfer wants to send, adds POLLOUT
* http/2 filter has a flow control block, removes POLLOUT and adds
POLLIN (it is waiting on a WINDOW_UPDATE from the server)
* TLS filter is connected and changes nothing
* h2-proxy filter also has a flow control block on its tunnel stream,
removes POLLOUT and adds POLLIN also.
* socket filter is connected and changes nothing
* The resulting pollset is then mixed together with all other transfers
and their pollsets, just as before.
Use of `SEND_HOLD` is no longer necessary in the filters.
All filters are adapted for the changed method. The handling in
`multi.c` has been adjusted, but its state handling the the protocol
handlers' `getsocks` method are untouched.
The most affected filters are http/2, ngtcp2, quiche and h2-proxy. TLS
filters needed to be adjusted for the connecting handshake read/write
handling.
No noticeable difference in performance was detected in local scorecard
runs.
Closes#11833
- use CLIENTWRITE_BODY *only* when data is actually body data
- add CLIENTWRITE_INFO for meta data that is *not* a HEADER
- debug assertions that BODY/INFO/HEADER is not used mixed
- move `data->set.include_header` check into Curl_client_write
so protocol handlers no longer have to care
- add special in FTP for `data->set.include_header` for historic,
backward compatible reasons
- move unpausing of client writes from easy.c to sendf.c, so that
code is in one place and can forward flags correctly
Closes#11885
Not the counter that accumulates all headers over all redirects.
Follow-up to 3ee79c1674
Do a second check for 20 times the limit for the accumulated size for
all headers.
Fixes#11871
Reported-by: Joshix-1 on github
Closes#11872
When the legacy CURLOPT_HTTPPOST option is used, it gets converted into
the modem mimpost struct at first use. This data is (now) kept for the
entire transfer and not only per single HTTP request. This re-enables
rewind in the beginning of the second request instead of in end of the
first, as brought by 1b39731.
The request struct is per-request data only.
Extend test 650 to verify.
Fixes#11680
Reported-by: yushicheng7788 on github
Closes#11682
To avoid abuse. The limit is set to 300 KB for the accumulated size of
all received HTTP headers for a single response. Incomplete research
suggests that Chrome uses a 256-300 KB limit, while Firefox allows up to
1MB.
Closes#11582
- add an `id` long to Curl_easy, -1 on init
- once added to a multi (or its own multi), it gets
a non-negative number assigned by the connection cache
- `id` is unique among all transfers using the same
cache until reaching LONG_MAX where it will wrap
around. So, not unique eternally.
- CURLINFO_CONN_ID returns the connection id attached to
data or, if none present, data->state.lastconnect_id
- variables and type declared in tool for write out
Closes#11185
- state is fully kept at connection, since curl_ws_send() and
curl_ws_rec() have lifetime beyond usual transfers
- no more limit on frame sizes
Reported-by: simplerobot on github
Fixes#10962Closes#10999
Prior to this change STRING_AWS_SIGV4 (CURLOPT_AWS_SIGV4) was wrongly
marked as binary data that could not be duplicated.
Without this fix, this option's value is not copied upon calling
curl_easy_duphandle().
Closes https://github.com/curl/curl/pull/11021
- `drain` was used by http/2 and http/3 implementations to indicate
that the transfer requires send/recv independant from its socket
poll state. Intended as a counter, it was used as bool flag only.
- a similar mechanism exists on `connectdata->cselect_bits` where
specific protocols can indicate something similar, only for the
whole connection.
- `cselect_bits` are cleard in transfer.c on use and, importantly,
also set when the transfer loop expended its `maxloops` tries.
`drain` was not cleared by transfer and the http2/3 implementations
had to take care of that.
- `dselect_bits` is cleared *and* set by the transfer loop. http2/3
does no longer clear it, only set when new events happen.
This change unifies the handling of socket poll overrides, extending
`cselect_bits` by a easy handle specific value and a common treatment in
transfers.
Closes#11005
By making sure we set state.upload based on the set.method value and not
independently as set.upload, we reduce confusion and mixup risks, both
internally and externally.
Closes#11017
- currently only on debug build and when env variable
CURL_PROXY_TUNNEL_H2 is present.
- will ALPN negotiate with the proxy server and switch
tunnel filter based on the protocol negotiated.
- http/1.1 tunnel code moved into cf-h1-proxy.[ch]
- http/2 tunnel code implemented in cf-h2-proxy.[ch]
- tunnel start and ALPN set remains in http_proxy.c
- moving all haproxy related code into cf-haproxy.[ch]
VTLS changes
- SSL filters rely solely on the "alpn" specification they
are created with and no longer check conn->bits.tls_enable_alpn.
- checks on which ALPN specification to use (or none at all) are
done in vtls.c when creating the filter.
Testing
- added a nghttpx forward proxy to the pytest setup that
speaks HTTP/2 and forwards all requests to the Apache httpd
forward proxy server.
- extending test coverage in test_10 cases
- adding proxy tests for direct/tunnel h1/h2 use of basic auth.
- adding test for http/1.1 and h2 proxy tunneling to pytest
Closes#10780
Some IP cameras send malformed RTSP interleaved frames sometimes, which
can cause curl_easy_perform return 1 (CURLE_UNSUPPORTED_PROTOCOL). This
change attempts to skip clearly incorrect RTSP interleaving frame data.
Closes#10808
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
'data->multi' is kept a pointer to the multi handle as long as the easy
handle is actually part of it even when the handle is moved to the
pending/msgsent lists. It needs to know which multi handle it belongs
to, if for example curl_easy_cleanup() is called before the handle is
removed from the multi handle.
Alll 'data->multi' pointers of handles still part of the multi handle
gets cleared by curl_multi_cleanup() which "orphans" all previously
attached easy handles.
This is take 2. The first version was reverted for the 8.0.1 release.
Assisted-by: Stefan Eissing
Closes#10801
For GOOD_EASY_HANDLE and GOOD_MULTI_HANDLE checks
- allow NULL pointers to "just" return an error as before
- fail hard on nun-NULL pointers that no longer show the MAGICs
Closes#10812
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
Assisted-by: Stefan Eissing
Ref: #10743Closes#10762
By letting curl_easy_header() and curl_easy_nextheader() store the
header data in their own struct storage when they return a pointer to
it, it makes it possible for applications to use them both in a loop.
Like the curl tool does.
Reported-by: Boris Okunskiy
Fixes#10704Closes#10707
The feature is rarely used so this frees up data for the vast majority
of easy handles that don't use it.
Rename "protdata" to "ftpwc" since it is always an FTP wildcard struct
pointer. Made the state struct field an unsigned char to save space.
Closes#10639
- Change readwrite_upload() to call win_update_buffer_size() no more
than once a second to update SO_SNDBUF (send buffer limit).
Prior to this change during an upload readwrite_upload() could call
win_update_buffer_size() anywhere from hundreds of times per second to
an extreme test case of 100k per second (which is likely due to a bug,
see #10618). In the latter case WPA profiler showed
win_update_buffer_size was the highest capture count in
readwrite_upload. In any case the calls were excessive and unnecessary.
Ref: https://github.com/curl/curl/pull/2762
Closes https://github.com/curl/curl/pull/10611
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- add test2600 as a unit test that triggers various connect conditions
and monitors behaviour, available in a debug build only.
- this exposed edge cases in connect.c that have been fixed
Closes#10312
- Curl_write_plain/Curl_read_plain have been eliminated. Last code use
now uses Curl_conn_send/recv so that requests use conn->send/revc
callbacks which defaults to cfilters use.
- Curl_recv_plain/Curl_send_plain have been internalized in cf-socket.c.
- USE_RECV_BEFORE_SEND_WORKAROUND (active on Windows) has been moved
into cf-socket.c. The pre_recv buffer is held at the socket filter
context. `postponed_data` structures have been removed from
`connectdata`.
- the hanger in HTTP/2 request handling was a result of read buffering
on all sends and the multi handling is not prepared for this. The
following happens:
- multi preforms on a HTTP/2 easy handle
- h2 reads and processes data
- this leads to a send of h2 data
- which receives and buffers before the send
- h2 returns
- multi selects on the socket, but no data arrives (its in the buffer already)
the workaround now receives data in a loop as long as there is something in
the buffer. The real fix would be for multi to change, so that `data_pending`
is evaluated before deciding to wait on the socket.
io_buffer, optional, in cf-socket.c, http/2 sets state.drain if lower
filter have pending data.
This io_buffer is only available/used when the
-DUSE_RECV_BEFORE_SEND_WORKAROUND is active, e.g. on Windows
configurations. It also maintains the original checks on protocol
handler being HTTP and conn->send/recv not being replaced.
The HTTP/2 (nghttp2) cfilter now sets data->state.drain when it finds
out that the "lower" filter chain has still pending data at the end of
its IO operation. This prevents the processing from becoming stalled.
Closes#10280
- new functions and macros for cfilter debugging
- set CURL_DEBUG with names of cfilters where debug logging should be
enabled
- use GNUC __attribute__ to enable printf format checks during compile
Closes#10271
