- Checks for missing explicit `return` statements at the end of functions
that can return non-`None` values.
- Checks for classes that inherit from `object`.
- Checks for useless expressions.
- Within an `except*` clause, raise exceptions with `raise ... from err`
or `raise ... from None` to distinguish them from errors in exception
handling
- Checks for variable assignments that immediately precede a `return` of the
assigned variable.
- Checks for `else` statements with a `return` statement in the preceding
`if` block.
- Checks for unnecessary parentheses on raised exceptions.
Closes: #21258
OpenSSL records its peer verification status inside its SSL_SESSION
objects. When a session is later reused, the SSL connection inherits
this verify status.
Session keys prevent reuse of sessions between connections that verify
the peer and those who do not. However, when Apple SecTrust is used
to verify a connection, this does not update the Sessions verify
status (and there is no setter). On session reuse, OpenSSL fails
the verification and Apple SecTrust cannot verify either since the
certificate peer chain is not available.
Fix this by checking the verification status on session reuse and
remove the session again if the peer needs to be verified, but the
session is not.
Reported-by: Christian Schmitza
Fixes#20435Closes#20446
Add a `cert-status` feature flag to `curlinfo`, based on the conditions
used in `lib/vtls` sources.
To:
- fix disabling this test when using OpenSSL (or fork) built with
the `no-ocsp` option.
- enable this test for AWS-LC in CI.
Note:
- BoringSSL (and quiche) has OSCP disabled by default.
- MultiSSL dynamic selection continues to confuse this test.
(To fix it, support would need to be detected by querying libcurl
via curl. Probably overkill given that OCSP is on its way out.)
Follow-up to f2c765028f#20149Closes#20133
- adjust cipher list in infof() statement for min/max TLS version
- skip test_17_07 for wolfSSL 5.8.4 when CHACHA20 is negotiated
due to regression with homebrew build on ARM systems.
Fixes#19644
Reported-by: Viktor Szakats
Closes#19662
There remain some false positives, hits in test data, and `dir` use,
around 100 issues in total.
There is no plan to enforce badwords on tests.
Also:
- badwords.txt: let a few `manpage[s]` occurrences through
(in Perl code).
Closes#19541
- fix test_17_20 flakiness: the test case did not have `nghttpx` in
its parameters, causing it to no check if a reload was necessary.
When that test ran behind one that gave nghttpx another certificate,
eg. in parallel mode, it used the wrong pinned pubkey.
- Have `env` provide lists of HTTP protocol versions available for
testing. Replace parameterized tests on a fixed protocol list with
the dynamic one from env. This makes checks for protocol availability
in the test function bodies superfluous.
refs #19489Closes#19540
To allow running pytests on more curl configurations.
Also delete a redundant H3 feature check from test_17_14_expired_cert.
Cherry-picked from #19407Closes#19412
A regression in curl 8.17.0 led to a customer CAPATH set by the
application (or the curl command) to be ignored unless licurl was built
with a default CAPATH.
Add test cases using `--capath` on the custom pytest CA, generated with
the help of the openssl command when available.
Fixes#19401
Reported-by: Brad King
Closes#19308
Change the test certificate to carry a altname 'dns:127.0.0.1' which
should *not* match in test_17_05_bad_ip_addr.
wolfSSL: since `wolfSSL_check_domain_name()` does not differentiate
between DNS and IP names, use if only for DNS names. For IP addresses,
get the peer certificate after the handshake and check that using
wolfSSL_X509_check_ip_asc().
Unfortunately, this succeeds where it should not, as wolfSSL internally
used the same check code for both cases. So, skip the test case until
wolfSSL fixes that.
Reported-by: Joshua Rogers
Closes#19252
- configure/cmake support for enabling the option
- supported in OpenSSL and GnuTLS backends
- when configured, Apple SecTrust is the default trust store
for peer verification. When one of the CURLOPT_* for adding
certificates is used, that default does not apply.
- add documentation of build options and SSL use
Closes#18703
Detect via curlinfo if curl has verbose strings disabled, and skip
tests that require it.
Also:
- cmake: make pytests depend on curlinfo.
Cherry-picked from #18797Closes#18801
libtests and clients were built the same way after recent overhauls.
libtests are used by runtests, clients by pytests.
Merge clients into libtests, aligning their entry function signature,
dropping common utility functions, and simplifying the build.
Note: After this patch `CURLDEBUG` applies to cli tests, when enabled.
Also:
- lib552: drop local copy-paste debug callback in favor of testtrace.
- lib552: drop local copy-paste dump function in favor of testtrace.
- clients: use `long` for HTTP version, drop casts.
- clients: replace local dump function in favor of testrace clone.
- sync cli test entry function prototype with libtests'.
- h2_serverpush: replace local trace callback with testtrace.
- de-duplicate 3 websocket close, ping, ping, functions. Kept the pong
iteration from `ws_pingpong`. Note: the pong clone in `lib2304` was
returning an error when `curl_ws_recv()` returned non-zero and
the payload matched the expected one anyway. After this patch, this
case returns success, as it does in `ws_pingpong`.
`lib2304` keeps passing, but I'm not sure if the previous behavior
was intentional.
- display full value in websocket close, ping, pong, drop casts.
Closes#18079
Fix compile error when building with `--disable-verbose`.
Adjust pytest to skip when curl is not a debug build but needs
traces.
Follow-up to b453a447ceCloses#18053
This still allows users to explictily ask for 1.0 or 1.1 as the minimum
version. If the TLS library allows it.
Starting with this change, the CURL_SSLVERSION_DEFAULT value is no
longer used as minimum version when the TLS backend are called.
This also makes curl set the minimum version to 1.2 independently of
libcurl for the rare case where a newer curl tool would use an older
libcurl.
URL: https://curl.se/mail/lib-2025-07/0007.html
Assisted-by: Stefan Eissing
Closes#17894
To make building the http client tests faster, with no duplication, by
using the build method that other test binaries already use.
The difference compared to other tests is that these don't use internal
libcurl headers or code. With the exception of `curl_config.h`, for
a feature macro.
Before this patch, these tests were built like examples.
Also:
- de-duplicate code and give unique names to colliding symbols.
- add local getopt implementation and enable all code for MSVC.
Adapted for curl via Public Domain source:
4e618ef782/getopt.h
Credits-to: Christopher Wellons
Thanks!
Closes#17627
These libraries do not support TLS 1.3 and have been marked for removal
for over a year. We want to help users select a TLS dependency that is
future-proof and reliable, and not supporting TLS 1.3 in 2025 does not
infer confidence. Users who build libcurl are likely to be served better
and get something more future-proof with a TLS library that supports
1.3.
Closes#16677
Fix use of nghttpx fixture to be present even when h3 is not
available in curl. Fix TLS protocol versions expectations for
older openssl versions.
Closes#17538
Reduce Curl_ossl_ctx_init() complexity by splitting it up into
sub functions.
While splitting if ECH, add pytest fixed for AWS-LC and enable
it in CI.
Closes#17404
Require now pytest-xdist from tests/http/requirements.txt and
run pytest in 'auto' parallel mode (counts cpu cores).
For CI runs, set the worker count to 4, overriding the
core count of 2 exposed in the images.
- use Filelock to generate allocated ports at start for all
workers and have subsequent workers just read the file and
take the ports for their slot
- make httpd config clearing a function fixture so every test
starts with a clean httpd config
- have fixture `configures_httpd` as parameter of test cases
that configure httpd anyway, saving one reload
- add pytest-xdist and filelock to required pyhton modules
- add installs to ruff CI
- give live checks waiting for a server to start up longer time
- add fixtures to tests that rely on a server
- do not stop servers unnecessarily. failures may not start them
properly again, leading to unexpected fails in whatever follows
- add a https: port to httpd that is *not* back by QUIC to allow
failover tests without stopping the QUIC server
Closes#17295
No longer ignore the `--ciphers` argument in gnutls curl builds, but use
it to set the gnutls priority string.
When the set ciphers start with '+', '-' or '!', it is *appended* to the
curl generated priority string. Otherwise it replaces the curl one
completely.
Add test_17_18 to check various combinations.
Closes#16557
Give peers and `exportable` flag, set TRUE when sessions for this peer
should not be exported. This evalualtes if the peer uses confidential
information (like srp username/password), a client certificate OR if the
"ssl_peer_key" contains relative paths.
When SSL is configured with paths for relevant components, like CA trust
anchors, an attempt is made to make this path absolute. When that does
not work or the infrstructure is not available, the peer key is marked
as *local*.
Exporting sessions based on relative paths may lead to confusion when
later imported in another execution context.
Closes#16322
OpenSSL QUIC method errors on setting TLSv1.2 ciphers, where other
methods do not.
Refrain setting --ciphers when min TLS version is 1.3 or higher.
Refrain setting --tls13-ciphers when max TLS version is less than 1.3.
Add 2 test cases.
Fixes#16232
Reported-by: zzq1015 on github
Closes#16235
Adds the experimental feature `ssls-export` to libcurl and curl for
importing and exporting SSL sessions from/to a file.
* add functions to libcurl API
* add command line option `--ssl-sessions <filename>` to curl
* add documenation
* add support in configure
* add support in cmake
+ add pytest case
Closes#15924
Fix regression that no longer printed the error messages about expired
certificates in openssl. Add test case for openssl/gnutls/wolfssl.
Fixes#15612
Reported-by: hiimmat on github
Closes#15613
Add two test cases that connection using a hostname the server has no
certificate for. First, verify that the peer verification fail, as
expected. Second, provide '--insecure' to test that the connection
succeeded and returned some data.
Closes#15429
Use session cache for QUIC when built with quictls or wolfSSL.
Add test_017_10 for verifying QUIC TLS session reuse when built with
quictls, gnutls or wolfssl.
Closes#15358
Use mbedtls_ssl_session_load() and mbedtls_ssl_session_save() to convert
TLS sessions to byte blobs for the session cache.
Fix a skip message to better indicate why the test is skipped for
mbedtls.
Closes#15398
Override the system default config in test_17_09, since we want to check
all TLS versions. Provide own, empty config file to gnutls, so that any
system wide file has no effect.
The latest ubunu image in GH CI disables TLS 1.0 and 1.1
system wide for GnuTLS. Good intentions.
Closes#15310
For TLSv1.3, if supported, observer special return code to retrieve
newly arrived session from mbedTLS.
Adjust test expectations now that TLSv1.3 session resumption works in
mbedTLS >= 3.6.0.
Based on #14135 by @ad-chaos
Closes#15245
Register a callback to get notified of new SSL sessions by wolfSSL.
Remove the explicit session retrieval after handshake, since this does
not work for TLSv1.3.
Adjust test expectations now that TLSv1.3 session resumption works
in wolfSSL.
Closes#15243
Based on #14135, implement TLSv1.3 earlydata support for the curl
command line, libcurl and its implementation in GnuTLS.
If a known TLS session announces early data support, and the feature is
enabled *and* it is not a "connect-only" transfer, delay the TLS
handshake until the first request is being sent.
- Add --tls-earldata as new boolean command line option for curl.
- Add CURLSSLOPT_EARLYDATA to libcurl to enable use of the feature.
- Add CURLINFO_EARLYDATA_SENT_T to libcurl, reporting the amount of
bytes sent and accepted/rejected by the server.
Implementation details:
- store the ALPN protocol selected at the SSL session.
- When reusing the session and enabling earlydata, use exactly
that ALPN protocol for negoptiation with the server. When the
sessions ALPN does not match the connections ALPN, earlydata
will not be enabled.
- Check that the server selected the correct ALPN protocol for
an earlydata connect. If the server does not confirm or reports
something different, the connect fails.
- HTTP/2: delay sending the initial SETTINGS frames during connect,
if not connect-only.
Verification:
- add test_02_32 to verify earlydata GET with nghttpx.
- add test_07_70 to verify earlydata PUT with nghttpx.
- add support in 'hx-download', 'hx-upload' clients for the feature
Assisted-by: ad-chaos on github
Closes#15211
Change TLS proto version on the test httpd server to test setting
combinations of --tls13-ciphers and --ciphers.
To not let the changed config of the httpd server bleed into the next
test, clean and reload on each test. Because a reload is slow, only
do this if the config is different than the loaded config. For this
the httpd.reload_if_config_changed() method is added.
Overloading of autouse fixtures does not seem to work. For the test
httpd server to be reloaded with a clean config in test_18_methods,
to not be affected by the config changes in test_17_ssl_use, the two
class scope fixtures of test_18_methods are now combined.
Closes#14589
Configure the AES 256 instead of the AES 128 cipher in the test httpd to
make scorecard testing between httpd and caddy more comparable.
Adapt test_17 expectations, now that AES 128 can no longer, but 256 can
now be negotiated.
Closes#14502
